Content |
Thorens TD 202 Turnable
Compared with its "smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.
New TD 202 completes the new series of manual plug and play turntables. Compared with its "smaller” brother TD 201 it comes with a more massive plinth and a AT 95E cartridge.
SPECIAL FEATURES
The integrated phono stage includes an additional analogue/digital converter with USB out. So the record played will be automatically digitized and can easily be recorded on a computer using several kinds of recording software that can be downloaded from the web.
TD 202 Specification
Turntable section
Drive System Belt Drive
Motor DC
Motor Speed 33 1/3 RPM, 45 RPM
Rotation Speed Variation +/–2%
Wow and Flutter 0.2%
Signal-to-Noise Ratio 67dB or higher (A-weighted, 20kHz LPF) 60dB or higher (unweighted, 20kHz LPF)
Platter Aluminum Die-cast Diameter of Platter 12“, 300mm
Tonearm section
Alumi tube
Type Static Balance, Straight
Effective Arm Length 8.8“, 223.6mm
Stylus Pressure Range 0 to 4g
Supported Cartridge Weight 3.5 to 6.0g
Overhang 18.6mm
Anti-skating Adjustment Supported
Cartridge section
Type MM type (Audio-Technica AT-95E)
Stylus Construction Bonded Diamond
Frequency Response 20Hz to 20kHz
Channel Separation >18dB
Channel Balance 2.5dB
Vertical Tracking Angle 20 degrees
Supported Load Impedance 47k ohms
Output Voltage 2.5mV (1kHz, 3.54cm/sec.)
Stylus Pressure 2.0g +/–0.5g
Cartridge Weight 5.7g +/–0.5g Head-shell
Weight 11g (including Screws, Nuts and Wires)
Analog Output
Connector RCA Pin jack (Gold-plated) Power AC 100 to 240V, 50/60Hz Power Consumption 1.5W (less than 0.5W at Standby)
Overall Dimensions (W x H x D) 420 x 355x 121mm
Weight Approx. 3.9 kg
|
Specifications
Item name: Turntable
Item code: Q1-USB
Brand:JBSYSTEMS
Brief Introduction
1.Plastic dust cover
2.USB-output for direct recording to any PC
3.Belt Drive 2 speed
:: Product Description
* Middle Torque belt drive motor
* Fast start / stop
* 2 speeds: 33, 45 rpm
* +/-10% Pitch adjustment range
* USB-output for direct recording to any PC
* Free, multilingual Audacity software available via download:
* - Endless possibilities with free downloadable effect plug-ins
* - Import, export and edit Ogg Vorbis, MP3, AIFF and WAV sound files.
* - Cut, copy, splice, and mix sounds together.
* - Change the speed or pitch of a recording.
* - Remove static, hiss, hum, or other constant background noises.
* - Alter frequencies with Equalization, FFT Filter, and Bass Boost effects.
* - Adjust volumes with Compressor, Amplify, and Normalize effects.
* - Many more…
* Selectable phono/line output
* All functions are equipped with stylish, blue LED lights
* Plastic dust cover
* Retractable target light
* Audio Technica cartridge included
* All metal S-shaped tone arm assembly with:
* - Counterweight * - Anti-skating adjustment
* - Lever lift with height adjustment
* Adjustable large feet for perfect leveling
:: Technical Information
* Motor: DC motor
* Driving Method: Belt Drive
* Starting Time: less than 1 second
* Braking Time: less than 1 second
* Speed selection: 331/3 ~ 45 RPM
* Speed adjustment: +/-10%
* Wow & Flutter: less than 0,25% WRMS (JIS WTD) @ 331/3 RPM
* Tone arm type: Static balanced S-shaped tone arm.
* Tracking Error angle: Less than 3°
* Cartridge weight: 3,5~8,5g.
* Anti-skate range: 0~7g.
* Phono output: 1,5 ~ 3,6mV @ 1kHz 5cm/sec (with supplied AT HP-4005 cartridge)
* Line output: 90 ~ 216mV @ 1kHz 5cm/sec (with supplied AT HP-4005 cartridge)
* Computer interface USB 1.1 compliant (Windows(R) XP/Vista/Win7 or Mac(R) OS X)
* Power supply: 230V~ 50Hz.
* Power consumption: 14Watts
* Dimensions: 450 x 350 x 150mm (WxDxH)
* Weight : 9,0kg.
| Platter of diecast aluminum
Drive belt
Built-in phono equalizer controlled by switch (possible connection to an input-AUX)
Includes MM cartridge
elegant size
MANUAL/ΕΓΧΕΙΡΙΔΙΟ |
A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF. A new motor control with DC power supply minimzes unwanted vibration effectively. The main platter bearing consists of stainless steelspindle and bronze bushing with Teflon bottom to seccure low friction.
The main chassis is made from lightweight, but very stiff particle board. Essential II utilises a straight 8,6" aluminium tonearm design made from a single piece of aluminium with sapphire bearings, which offers a far better „plug & play" solution, than itʽs predecessor. Special feet effectively decouples the turntable from the surface.
Specifications:
-
speed : 33, 45 (manual speed change)
-
principle : belt drive
-
Speed variance : 33: 0,14% 45: 0,25%
-
Wow & flutter : 0,12%
-
platter : 300mm MDF with felt mat (0,8kg)
-
main bearing : stainless steel
-
tonearm : 8,6” aluminium
-
effective : arm length 218,5 mm
-
overhang : 22,0mm
-
effective tonearmmass : 8,0gr
-
counterweight for mass : 3 - 5,5g (included)
-
tracking force range : 0 - 25mn (OM5 18mn recommended)
-
included accessory : power supply, dust cover
-
Power consumption : 4,5 watts
-
dimensions : 420 x 112 x 330mm (WxHxD)
-
weight : 4,0 kg net
| Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight ultra low mass tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it in.
The only plastic here is the stylus guard. The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards.
- Belt drive system with low vibration DC motor
- Central gravity mass point made from artificial stone
- Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom
- Low resonance MDF platter with felt mat
- 8,6” ultra low mass tonearm with straight arm tube
- Pre-adjusted tracking force & antiskating
- Gold-plated RCA contacts & cartridge pins
- Colour options: red-black, white-black, silver-black
Specifications:
- speed : 33, 45 (manual speed change)
- Speed variance: 33: 0,2% 45: 0,18%
- Wow & flutter: 33: 0,14% 45: 0,13%
- platter: 300mm MDF
- tonearm: 8,6” metal tube
- effective arm length: 218,5 mm
- overhang: 22,0 mm
- effective tonearmmass: 8,0gr
- counterweight for cartridge mass: 3 - 5,5g (included)
- tracking force range: 0 - 30mn (OM5 18mn pre-adjusted)
- output: RCA to phono input
- included accessory: RCA cable, 15V DC power supply
- power consumption: 4,0 watts
- dimensions: 430 x 90 x 300mm (WxHxD)
- weight: 2,7 kg net
|
Best buy turntable with maximum simplicity, outstanding sound quality & USB recording capability!
Pro-Ject has decided to go after the cheap plastic turntable market with an high quality alternative that comes complete with an Ortofon cartridge. The new Elemental Phono USB table is a real "plug'n'play" all the way. No adjustment of counterweight and antiskating is needed, because both are pre-adjusted. This new straight tonearm is optimised for Ortofon OM cartridge series. All the buyer needs to do is remove it from the box, remove bearing guard, locate the belt around the platter, remove stylus guard and plug it into hifi system and computer.
The only plastic here is the stylus guard!
The hidden secret to the new table's sonic success, is a central gravity mass point, made from artificial stone and placed directly underneath the platter bearing. It is capable to fully absorb unwanted rumble and motor vibration. This turntable appears to be pure simplicity itself, while maintaining high quality audio standards and vinyl recording capability.
• Belt drive system • Integrated motor control with DC power supply secures silent running • Central gravity mass point made from artificial stone • Main platter bearing made from stainless steel runs in bronze bushing with Teflon bottom • Low resonance MDF platter with felt mat • 8,6” ultra low mass tonearm with straight arm tube • Pre-adjusted tracking force & antiskating • Gold-plated RCA contacts & cartridge pins • Integrated phono stage with precise RIAA equalisation • Line level output • A/D converter for vinyl recording with USB B output
• Colour options: red-black, white-black, silver-black
|
Reviews
There are no reviews yet.