ESI tweeter 0326H for NEARxx series MONITOR spare part

40.92 incl. GR VAT

Only 5 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
spare part tweeter for MONITOR NEAR0x series

 

Read more

spare part tweeter for MONITOR NEAR0x series
Weight 0.20 kg

Reviews

There are no reviews yet.

Be the first to review “ESI tweeter 0326H for NEARxx series MONITOR spare part”

Your email address will not be published. Required fields are marked *

Quick Comparison

ESI tweeter 0326H for NEARxx series MONITOR spare part removeB & C Speakers DE-64TN Driver 2", 110W, 107.5dB, 0.5-18kHz, 4.1kg removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DCX-50 Compression Driver 160W, 400-16000 Hz,108,5 dB/w/m remove
NameESI tweeter 0326H for NEARxx series MONITOR spare part removeB & C Speakers DE-64TN Driver 2", 110W, 107.5dB, 0.5-18kHz, 4.1kg removeB & C Speakers DE-200 Driver 1" 40W, 108,5dB 8 Ohm removeB & C Speakers DE-16 Driver 60WRMS, 106dB, 2.5-20k removeB & C Speakers DE-45 Driver 60 WRMS, 106dB, titaniox removeB & C Speakers DCX-50 Compression Driver 160W, 400-16000 Hz,108,5 dB/w/m remove
Image
SKU0326HESIDE-64TNDE-200DE-16DE-45DCX50
Rating
Price40.92 incl. GR VAT 253.00 incl. GR VAT 124.00 incl. GR VAT 99.20 incl. GR VAT 136.15 incl. GR VAT 453.22 incl. GR VAT
Stock

Only 5 left in stock (can be backordered)

Available on backorder

Only 1 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

Available on backorder

Available on backorder

AvailabilityOnly 5 left in stock (can be backordered)Available on backorderOnly 1 left in stock (can be backordered)Only 1 left in stock (can be backordered)Available on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Contentspare part tweeter for MONITOR NEAR0x series
220 W continuous program power capacity
2” horn throat diameter
75 mm (3 in) aluminium voice coil
500 – 18000 Hz response
107.5 dB sensitivity
Shorting copper cap for extended HF response
100 W continuous program power capacity
1” horn throat diameter
44 mm (1.7 in) aluminium voice coil
Titanium diaphragm
1000 – 18000 Hz response
106 dB sensitivity
DE-16 Driver 60WRMS, 106dB, 2.5-20k 1" high frequency compression driver. Low mass mylar diaphragm ensures a very flat frequency response and optimized ceramic magnet assembly allows for high sensitivity and low distortion up to 18 kHz. Specifications1 Throat Diameter 25 mm (1 in) Nominal Impedance 8 Ω Minimum Impedance 7.8 Ω Power Handling (2200 –20000 Hz) Nominal2 30 W Continuous Program3 60 W Sensitivity (1W/1m)4 107 dB Frequency Range 1.5 – 18 kHz Recommended Crossover5 2.2 kHz Voice Coil Diameter 44 mm (1.7 in) Winding Material Aluminium Inductance 0.11 mH Diaphragm Material Mylar Flux Density 1.5 T Mounting and Shipping Information Two M6 holes 180° on 76 mm (3 in) diameter Overall Diameter 102 mm (4 in) Depth 58 mm (2.3 in) Net Weight (1 unit) 1.6 kg (3.5 lb) Shipping Weight (8 units) 13.9 kg (30.6 lb) Shipping Box (8 units) 220x220x150 mm (8.7x8.7x5.9 in) 1 Driver mounted on B&C ME 45 horn. 2 2 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range. Power calculated on rated minimum impedance. 3 Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal Impedance. Average SPL from 1000 to 18000 Hz. 5 12 dB/oct. or higher slope high-pass filter.

1” high frequency compression driver, titanium
diaphragm, flat aluminium wire voice coil, low distortion,
extremely good response from 1.5 kHz. to 18 kHz.

Specifications1
Throat Diameter 25 mm. (1 in.)
Nominal Impedance 8 Ω
Minimum Impedance 7.6 Ω
Power Handling
(1500 –20000 Hz)
Nominal2 60 W
Continuous Program3 120 W
Sensitivity (1W/1m)4 106 dB
Frequency Range 1 – 18 kHz
Recommended Crossover5 1.5 kHz
Voice Coil Diameter 44 mm. (1.7 in.)
Winding Material Aluminium
Inductance 0.11 mH
Diaphragm Material Titanium
Flux Density 1.7 T
Also available in 16 Ω, data upon request

Mounting and Shipping Informations
Two M6 holes 180° on 76 mm. (3 in.) diameter
Three M6 holes 120° on 57 mm. (2.2 in.) diameter
Overall Diameter 134 mm. (5.3 in.)
Depth 68 mm. (2.7 in.)
Net Weight (1 unit) 2.9 Kg. (6.4 lb.)
Shipping Weight (4 units) 12.5 Kg. (27.5 lb.)
Shipping Box (4 units) 300x160x180 mm.
(12x6.3x7.1 in.)
1 Driver mounted on B&C ME 45 horn.
2 2 hours test made with continuous pink noise signal (6 dB crest factor) within
the specified range . Power calculated on rated minimum impedance.
3 Power on Continuous Program is defined as 3 dB greater than the Nominal
rating.
4 Applied RMS Voltage is set to 2.83V for 8 ohms and 4V for 16 ohms Nominal
Impedance. Average SPL from 1000 to 18000 Hz.
5 12 dB/oct. or higher slope high-pass filter.

160 W continuous program power capacity
2” horn throat diameter
400 – 16000 Hz response
108.5 dB sensitivity
Neodymium magnet assembly
Time coherent coaxial design
Weight0.20 kg4.10 kg2.00 kg1.70 kg2.00 kg10.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.20 kg
Weight 4.10 kg
Weight 2.00 kg
Weight 1.70 kg
Weight 2.00 kg
Weight 10.00 kg