Velodyne SPL 1200 ULTRA ACTIVE Subwoofer

A subwoofer designed specifically to shine alongside the rest of the BMR-driven Aero speakers, it adds phenomenal amounts of depth and power to your music and movies.

 Features

        500W power
        10" front-firing subwoofer driver
        10" down-firing ABR (Auxiliary Bass Radiator)
        Premium construction

 Rated output power    500W
Frequency response    21Hz - 200Hz
Drivers    1 x 10" (250mm) front-firing subwoofer
1 x 10" (250mm) down-firing ABR
Crossover    Active - variable 40Hz - 200Hz
Colour    Black
Dimensions (WxHxD)    330 x 340 x 355mm (13.0 x 13.4 x 14.0“)
Weight    11.7kg (25.8lbs) each

System Format:    Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit:    18 Hz
Upper Frequency Limit:    40 - 120 Hz Variable
Low Pass Filter Alignment:    Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output    650 watts Continuous. 1200 watts (peak)
Amplifier Classification    D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation    4 Settings (Off/Music/Movie/Impact)
Phase Control    0-90-180-270 degrees
Auto Sensing Input Level Requirements    Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level    -60 to +10dB in 1dB increments
Drive Unit Complement    1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input    3.5mm mono jack socket
Connections    Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance    20 kohms
Dimensions (H x W x D)    430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth    28 mm (1 1/8 Inches)
Weight (unpacked)    35.3 kg (77.6 lbs)
Mains Input Voltage    100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications    CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption    Maximum 1000W. Standby Fuse Type    20mm UL/VDE (Value is region specific)
IR Remote Control Code    NEC SH6122

Amplifier Output: 1000 watts (RMS) 2000 watts (Peak)
Frequency Response: 16Hz to 40/160Hz variable
Crossover (Low Pass): 40Hz - 160Hz Variable slope characteristic from
12 - 36dB/Octave
Sub-Sonic Filter (High Pass): 16Hz - 31Hz
EQ: 4 x Presets 1 x User Setting
Equalisation: Graphic 9 band Equaliser ±6dB in 0.5dB steps
Volume Level: -80 - 0dB (1dB increments from 0 to -30dB & 2dB
increments from -31 to -80dB)
Auto Sensing Input Requirements: Line Level>5mV (RMS) Variable delay time
5, 10, 15, 20, 25 & 30 minutes
Variable Phase Control: 0. 45. 90, 135, 180, 225, 270 & 315º
Internal Memory: 3 Independent memory locations
Cabinet Specification:
Sealed Cabinet with 25mm thick M.D.F
construction with critical internal bracing
Amplifier Classification:
Class-D amplifier with DSP control
Driver Complement:
1 x 15" C-CAM long throw sub-woofer driver featuring triple suspension and a 4" long throw voice coil

External Dimensions -
Excluding Plinth: Width: 485mm (19 inches)
Height: 455mm (18 inches)
Depth: 475mm (18 3/4 inches)
Weight: 50 Kg (110lbs)
Mains input Voltage: 100 - 240 Vac 50/60Hz (Factory Set)
Trigger Input:
3.5mm Jack input, +12Vdc = On State

User's Manual

AVAILABLE IN THESE COLOR FINISHES

With the down-firing port on the Impact-10, you get more bass output with less distortion than other companies' subwoofers that cost about the same. With its 250 Watts of amplifier power generating bass in the 32 Hz to 140 Hz spectrum, you get powerful output even in our entry-level subwoofer. Using the adjustable low-pass crossover frequency feature, you can blend the Impact-10 with your home theater satellites, gaming system or music speakers. The Impact-10's attractive black ash wood grain colored cabinet with black gloss trim complements your decor.


Features



Compact, stylish cabinet; high-value subwoofer

10" forward firing coated fiber woofer

Down-firing port minimizes distortion

2" copper-wound voice coils for exceptional reliability

"Green” MDP amp rated at 250 watts Dynamic power

User's Manual

Specifications