Velodyne Impact 10 Sub Loudspeaker

With the down-firing port on the Impact-10, you get more bass output with less distortion than other companies' subwoofers that cost about the same. With its 250 Watts of amplifier power generating bass in the 32 Hz to 140 Hz spectrum, you get powerful output even in our entry-level subwoofer. Using the adjustable low-pass crossover frequency feature, you can blend the Impact-10 with your home theater satellites, gaming system or music speakers. The Impact-10's attractive black ash wood grain colored cabinet with black gloss trim complements your decor.


Features



Compact, stylish cabinet; high-value subwoofer

10" forward firing coated fiber woofer

Down-firing port minimizes distortion

2" copper-wound voice coils for exceptional reliability

"Green” MDP amp rated at 250 watts Dynamic power

User's Manual

Specifications

Crossover Tuning    
Mushrooms    
Description     Active closed-box subwoofer system
Drive unit     ø250mm (10 in) paper/Kevlar® cone long-throw
Frequency range     -6dB at 18Hz and 25/140Hz adjustable (EQ at A)
Frequency response     ±3dB 25Hz – 40/140Hz adjustable (EQ at A)
Bass Extension     -6dB at 18Hz (position A)

-6dB at 23Hz (position B)

-6dB at 28Hz (position C)
Amplifier     Power output: 500W
Rated power consumption:     98W / 1W standby
Input impedance:     33kΩ
Signal / noise:     >90dB
Functions:     Input level (line in)

Input level (speaker in)

Low-pass filter frequency (line in only)

Low-pass filter bypass

Bass extension

Bass roll-off alignment

Auto sense on/standby

Phase switch
Inputs:     Line In (RCA Phono)

Speaker in (Binding post)

12v trigger (3.5mm jack)

Low-pass filter

Active 4th-order, variable cut-off frequency
Dimensions     Height: 325mm (12.8 in) not including feet

Width: 325mm (12.8 in)

Depth: 375mm (14.8 in) including grille and controls
Net weight     15.5kg (34.4 lb)
Finishes     Matte Black

Product Series     Subwoofers
Speaker Type     Subwoofer
Frequency Range (+/-3 dB) [Hz]     28 - 190
Maximum SPL [dB]     112
Crossover Frequency [Hz]     40 - 120 Hz
Low Frequency Driver     1 x 12" long stroke  Polymere Aluminimum
Enclosure Type     Bass Reflex
Bass Reflex Tuning Frequency [Hz]     36.0
Max. Amplifier Power Output [RMS watt]     220
Continous IEC Power Output [RMS watt]     170
Input Impedance [Ω]     25K
Connection input(s)     Mono line level (LFE)
Stereo line level (low pass filtered)
RCA
Magnetic Shielding     No
Recommended Placement     Floor
Near wall or corner
Recommended Distance From Wall [cm]     > 5
Functions     Crossover Frequency
Phase Switch
Standby (Auto Power) On/Off Switch
Volume (Gain)
Maximum Power Consumption [W]     250
Max. Dimensions Incl. Base And Grille (HxWxD) [mm]     370 x 340 x 380
Weight [kg]     14.7
Accessories Included     Manual
Rubber Bumpers
Spikes M6
Finish     Black Ash Vinyl
Light Walnut Vinyl
White Vinyl

Length    No
Accessories    Mic, mic stand, remote control
Amplifier    390 watts Dynamic/195 watts RMS Power
Auto On/Off    Yes
Cabinet Design    Extended Excursion Down-firing port
Color    Black Ash Wood Grain
Dimensions: (H/W/D)    16.75” x 15.25” x 17” (includes feet and grille) (42.5 x 38.7 x 43.1 cm)
HiPass Crossover    80 Hz, 6 dB/octave
LoPass Crossover    40 - 120 Hz adjustable (12 dB octave, 24 dB ultimate)
Phase Control    0, 90, 180, 270 Degrees
Removable Grille    Yes
Shipping Weight    39 lbs. (18 Kg)
Size    Large
Voice Coil    2-Layer copper
Warranty (N. Am.)    Two years (electronics & drivers - parts & labor)

System Format:    Sealed Cabinet. 25mm M.D.F construction with internal bracing. Sealed amplifier compartment
Low Frequency Limit:    18 Hz
Upper Frequency Limit:    40 - 120 Hz Variable
Low Pass Filter Alignment:    Active 4th order 24dB/octave (6/12/18/24 dB user adjustable)
Amplifier Power Output    650 watts Continuous. 1200 watts (peak)
Amplifier Classification    D2AudioTM* DSP controlled, Class-D amplifier system. High current switch mode power supply (smpsu)
Equalisation    4 Settings (Off/Music/Movie/Impact)
Phase Control    0-90-180-270 degrees
Auto Sensing Input Level Requirements    Line Level > 2mV. Standby after 10 minutes if no signal sensed
Digital Volume Level    -60 to +10dB in 1dB increments
Drive Unit Complement    1 x 15” C-CAM® sub-woofer driver featuring triple suspension
3” long throw voice coil
12V Trigger Input    3.5mm mono jack socket
Connections    Stereo RCA in/out
LFE in/out
12V Trigger in (3.5mm mono jack)
LEO* - 3.5mm Microphone input jack (microphone supplied)
Input Impedance    20 kohms
Dimensions (H x W x D)    430 x 400 x 400 mm (16 15/16 x 15 3/4 x 15 3/4 Inches)
Grille Depth    28 mm (1 1/8 Inches)
Weight (unpacked)    35.3 kg (77.6 lbs)
Mains Input Voltage    100 - 120 Vac / 220 - 240 Vac 50/60 Hz (Factory preset)
Electrical Certifications    CE/CB/ETL/Fcc/ErP (Energy saving compliant)
Power Consumption    Maximum 1000W. Standby Fuse Type    20mm UL/VDE (Value is region specific)
IR Remote Control Code    NEC SH6122

A subwoofer designed specifically to shine alongside the rest of the BMR-driven Aero speakers, it adds phenomenal amounts of depth and power to your music and movies.

 Features

        500W power
        10" front-firing subwoofer driver
        10" down-firing ABR (Auxiliary Bass Radiator)
        Premium construction

 Rated output power    500W
Frequency response    21Hz - 200Hz
Drivers    1 x 10" (250mm) front-firing subwoofer
1 x 10" (250mm) down-firing ABR
Crossover    Active - variable 40Hz - 200Hz
Colour    Black
Dimensions (WxHxD)    330 x 340 x 355mm (13.0 x 13.4 x 14.0“)
Weight    11.7kg (25.8lbs) each