| Content |
| General Description |
2-way centre speaker |
| Enclosure Type |
bass reflex |
| Transducer Complement |
2-way |
| Bass Driver |
5“(130mm)
Black woven Kevlar cone x 2 |
| Full Range Driver |
1“(25mm) soft dome |
| Sensitivity (2.83v @ 1m) |
89dB |
| Peak Power Handling |
25-120W |
| Peak SPL |
95dB |
| Nominal Impedance |
4Ω (compatible 8Ω ) |
| Minimum Impedance |
3.8Ω |
| Frequency Response (+/-3dB) |
65Hz ~ 20kHz |
| Bass Extension (-6dB) |
55Hz |
| Crossover Frequency |
2.5kHz |
| Dimensions ( H x W x D ) |
(180+10) x 510 x (200+32)mm |
| Net Weight |
8.0kg/pcs |
|
HF unit
25mm neodymium tweeter with high dispersion diaphragm. Ferro fluid cooled and damped. Magnetically shielded.
MF unit
150mm mid range driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.
LF unit
150mm bass driver with 32mm coil, die-cast chassis, high-power, long-throw magnet system and light weight alloy cone. Magnetically shielded.
Power Handling 150W max
Frequency response +/-6db 55Hz to 23kHz
Sensitivity 90 db/W
Impedance 8 ohms
Cabinet Real wood veneered. 15mm MDF wrap with 30mm MDF front baffle. High power, low turbulence, front firing bass reflex ports.
Terminals Gold-plated 2-way binding posts.
Weight
(excl. packaging) 8kg
Dimensions
Width 530mm
Height 170mm
Depth 196 mm
|
Power handling (watts): 170 (RMS)
Sensitivity (dB): 90
Nominal impedance (ohms): 8
Magnetically shielded
W x H x D (mm): 480 x 178 x 195
Weight (kg): 9
Frequency response (Hz): 35 - 45,000
Connections: Gold-plated 4mm banana socket/binding posts
Bass port Rear reflex
Drivers: HF: Dual ring-radiator design
LF: 2 x 130mm pressed allow cones with twin Neodymium magnets and long throw voice coil
Supplied accessories: Removable grille
Finish: black ash/ walnut |
2 x 5 ¼ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-180 W/ch
Impedance 8 Ohms
Sensitivity 89dB
Dimensions (cm) 17 x 50 x 22
|
The perfect complement to a full SX-series surround sound speaker set, the Cambridge Audio SX70 is the natural choice.
CRISP AND CLEAR SOUND FOR ARTICULATE VOCALS
Featuring a silk dome tweeter, the Cambridge Audio SX70 offers a smooth response that\'s essential for clear, accurate dialogue. Even during intense scenes in action movies, the dialogue can still clearly be heard.
TWIN WOOFERS FOR BROAD STAGING
Using two woofers, placed either side of the tweeter, gives the SX70 a wide soundstage, meaning that it connects up with your front speakers seamlessly. Now, when a jet aircraft rushes across the screen, the sound will follow from left to centre to right without a break.
TOP QUALITY CONSTRUCTION FOR LASTING APPEAL
Made from dense, MDF (Medium Density Fibreboard) rather than flimsy chipboard, the SX70s are built to last. That solid construction also has a knock-on effect in helping to improve the sound quality through higher cabinet rigidity. Other neat design features that we love include the recessed drive units with hidden fixing bolts, making sure the front the panel looks every bit as smooth as the sound.
PART OF THE SX-SERIES AND SO IDEAL FOR SURROUND SOUND SYSTEMS
With floorstanding and standmount sound speakers available, the Cambridge Audio SX70 is ideal as part of a surround sound speaker system. With a similar sonic balance to the other SX-series speakers you get a smooth, uniform sound right the way around your room for a totally enveloping sound.
| Magnetically Shielded |
Are they magnetically shielded? Allows speaker to be placed near a CRT TV/Monitor or sensitive magnetically stored data without the risk of damage. |
|
| Sensitivity (dB) |
The higher this figure is the easier the speaker is to drive and, hence, requires a less powerful amplifier |
85 |
| Impedance (ohms) |
Resistance. A standard figure is 8ohms |
8 |
| Bi-wireable |
Is it bi-wirable? Separate earthing cables for tweeter and woofer units - gives a more precise sound when used with bi-wire cable |
|
| Power Rating (Watts) |
Maximum power output long term/short term (RMS) |
100 |
| Dimensions |
Dimensions of speaker cabinet (W x D x H) in mm |
360w x 246d x 138h |
| Weight |
Weight of speaker, unboxed, in KG |
4 |
| Black |
Does the speaker come in a black finish? |
|
| Wood |
Does the speaker come in a wood or wood style finish? |
|
| Other Colour |
Does the speaker come in another coloured finish? |
|
| Freq Response (Hz) |
The lower the first figure the deeper the bass should be |
65 - 20,000 |
| Speaker Enclosure Type |
Type of speaker enclosure. Infinite baffle cabinets are sealed and so are often less fussy about placement. Usually they do require a little more power to drive, though. Bass reflex speakers are usually more efficient than infinite baffle designs but may require more care in terms of placement. Rear port designs, in particular, usually need at least 15-30cm (6 - 12 inches) between them and the wall behind, for a balanced bass response. ABR = Auxcillary Bass Radiator (looks like a standard bass cone but without power) |
Infinite baffle (sealed) |
|
2.5-way Dual 4" Center Channel Loudspeaker
* Dual 100mm (4“) PolyPlas low-frequency transducers
* High Definition Imaging (HDI) horn design - 25mm (1“) CMMD® Lite high frequency dome
* Recommended amplifier power: 20 – 125W, 60Hz – 22kHz, 88dB, 8 Ohms, Slipstream rear-firing bass port
Gold-plated binding-post speaker terminals, 165mm x 535mm x 187mm, Weight: 7.9 kg |
Reviews
There are no reviews yet.