Content |
2-way centre speaker
General Description |
2-way centre speaker |
Enclosure Type |
bass reflex |
Transducer Complement |
2-way |
Bass Driver |
5“(130mm) Black woven Kevlar cone x 2 |
Full Range Driver |
1“(25mm) soft dome |
Sensitivity (2.83v @ 1m) |
89dB |
Peak Power Handling |
25-120W |
Peak SPL |
95dB |
Nominal Impedance |
4Ω (compatible 8Ω ) |
Minimum Impedance |
3.8Ω |
Frequency Response (+/-3dB) |
65Hz ~ 20kHz |
Bass Extension (-6dB) |
55Hz |
Crossover Frequency |
2.5kHz |
Dimensions ( H x W x D ) |
(180+10) x 510 x (200+32)mm |
Net Weight |
8.0kg/pcs |
|
Specifications Recommended Usage | Center Speaker | Type | 2-Way Accoustic Suspension Design | Woofers | Dual 5" PMD Cone | Tweeters | 1" Aluminum Dome With Waveguide Horn | Magnetic Shielding | Yes | Frequency Response | 55 Hz - 35 kHz | Sensitivity | 89 dB/2.83 V/1 m | Input Power (Maximum / Nominal) | 250W / 100W | Impedance | 6 Ohms | Product Dimensions (W x H x D) | 20-1/4" x 7-1/2" x 8-3/8“ | Product Weight (lbs.) | 7.3 Kg
|
---|
|
2 x 6 ½ ¨ Polymer Composite Cone
with Rubber Surround
1 x 1¨Silk Polymer Dome Tweeter
Amplifier Power 20-200 W/ch
Impedance 8 Ohms
Sensitivity 90dB
Dimensions (cm) 19 x 60 x 35
|
Driver Complements
Mid/Woofer 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance aerated polypropylene cone with Extended Linear Motion voice coil driver
Midrange
Tweeter 1 - 3/4" Diameter (1.91cm)
Dynamic Balance ring radiator tweeter
Electrical
Overall Frequency Response 90Hz-31kHz
Lower -3dB Limit 115Hz
Upper -3dB Limit 28kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 90 dB
Inputs Gold-plated 5-way binding posts
Dimensions
Cabinet Size 4 5/16" H x 16 11/16" W x 3 15/16" D
(10.95cm H x 42.39cm W x 10.00cm D)
Mounting Options keyhole slot; one .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclsoure with time-aligned driver geometry and PowerPort bass venting
Shipping/Other
Product Weight 4.70 lbs. (2.13kgs)
Shipping unit: each
Total Shipping Weight 5.50 lbs. (2.49kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
Power Handling (RMS / Max.)
75 / 150 watts
Sensitivity (2.8V/1m)
90 dB
Impedance
4 – 8 Ohms
Frequency Response
40 - 34000 Hz
Recommended Amplifier Output
20 - 150 Watts
Dimensions (WxHxD)
420 x 145 x 195 mm
Weight
4.9 kg
|
Frequency Response: 45Hz- 100kHz Sensitivity (1W@1M): 89 dB Nominal Impedance: 4 Ohms Maximum S.P.L (Per pair in room): 112.8 dBA Power Handling (RMS): 200 W Recommended Amplifier Requirements (RMS): 60 - 200 W Bass Alignment: Rear Ported HiVe II Technology Mid / H.F Crossover Frequency: 1800 Hz Bass Low Pass Crossover Frequency: 250 Hz Drive Unit Complement: 2 x 6 1/2" RDT bass/mid-range driver 1 x C-CAM high frequency ribbon transducer External Dimensions - Excluding Stand: Width: 583mm (22 15/16 inches) Height: 225mm (8 7/8 inches) Depth: 291.2mm (11 7/16 inches) Stand Dimensions: Width: 610mm (24 inches) Height: 335mm (13 13/16 inches) Depth 463mm (18 1/4 inches) Weight: 19 Kg (41.8lbs) User's Manual AVAILABLE IN THESE COLOR FINISHES
|
Reviews
There are no reviews yet.