WHARFEDALE Reva-2 Speakers

The Reva-2 is the larger bookshelf speaker in the Reva range.

The Reva-2 is the larger bookshelf speaker in the Reva range. Being slightly larger than the Reva-1, it handles a little more bass and is ideal for stereo audiophile setups. It is also equally suitable for surround sound systems.

Designed from the ground up to offer state-of-the-art tonal accuracy and musical detail, Wharfedale Reva has been born out of a combination of extensive research into unique driver and cabinet technology, combined with a passion for music.

From our proprietary glass fibre weave bass and mid range drivers to the 7 layer piano gloss lacquer finish, Reva Series is stunning inside and out and will bring excitement to your music collection and home cinema experience.

Itʼs widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely youʼll wonder why you ever thought of compromise. Itʼs also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch.

System Format: 2 Way
Frequency Response: 60Hz - 35kHz
Sensitivity (1W@1M): 89dB
Nominal Impedance: 6 Ohms
Maximum SPL (dBA): 111.8
Power Handling (RMS): 80W
Recommended Amplifier Requirements (RMS): 10-80W
Bass Alignment: Sealed Cabinet
Tweeter Crossover Frequency: 2.1kHz
Drive Unit Complement: 1 x 6" RST® Bass/Mid driver.
2 x 1" (25mm) C-CAM® gold dome tweeters
Product External Dimensions:
(H x W x D) 250 x 300 x 120 mm
(9 13/16 x 11 13/16 x 4 3/4 inch)
Individual Weight: 4.69 Kg (10.38 lb)

User's Manual

Available in colors

Driver Complements
Mid/Woofer 1 - 6 1/2" Diameter (16.51cm)
Dynamic Balance driver with Super Cell Areated Polypropylene cone
Midrange 1 - 3 1/4" Diameter (8.26cm)
Dynamic Balance driver with Super Cell Aerated Polypropylene cone
Tweeter 1 - 1" Diameter (2.54cm)
Enhanced Ring Radiator Dynamic Balance tweeter
Electrical
Overall Frequency Response 36Hz-40kHz
Lower -3dB Limit 50Hz dB
Upper -3dB Limit 30kHz dB
Nominal Impedance compatible with 8 ohm outputs ohms
Recommended Amplifier Power 20-200 w/channel
Efficiency 88 dB
Crossover Orth Crossover
Crossover
(mid-high array) 2800HZ
Inputs Dual Gold-Plated Binding Posts
Dimensions
Cabinet Size 16 3/4" H x 8" W x 14 9/16" D
(42.55cm H x 20.32cm W x 36.99cm D)
Mounting Options speaker stands or shelf mount
Enclosure Type Sealed
Enclosure Type
(subwoofer) PowerPort bass venting
Shipping/Other
Product Weight 29.60 lbs. (13.43kgs)
Shipping unit: each
Total Shipping Weight 32.50 lbs. (14.74kgs)
Speaker Warranty 5 years parts and labor (original purchaser)

ALSO AVAILABLE IN "EBONY" COLOR

Itʼs widely understood that the sound of surround TVs cannot compete with the excitement of a properly designed and equalised home theatre system. But great sound comes at the expense of living space…until now. The wall-hugging RX-FX surround speaker reconciles the problem by providing a convincing, enveloping timbre-consistent surround sound that places you on the edge of your seat and at the heart of the action. Discreet enough to be flush-mounted on side or rear walls, the RX-FX design will blend with the system and your décor so completely youʼll wonder why you ever thought of compromise. Itʼs also immensely flexible sonically, offering direct or diffuse sound effects at the flick of a switch.

System Format: 2 Way
Frequency Response: 60Hz - 35kHz
Sensitivity (1W@1M): 89dB
Nominal Impedance: 6 Ohms
Maximum SPL (dBA): 111.8
Power Handling (RMS): 80W
Recommended Amplifier Requirements (RMS): 10-80W
Bass Alignment: Sealed Cabinet
Tweeter Crossover Frequency: 2.1kHz
Drive Unit Complement: 1 x 6" RST® Bass/Mid driver.
2 x 1" (25mm) C-CAM® gold dome tweeters
Product External Dimensions:
(H x W x D) 250 x 300 x 120 mm
(9 13/16 x 11 13/16 x 4 3/4 inch)
Individual Weight: 4.69 Kg (10.38 lb)

User's Manual

Available in colors

Frequency Response: 80 Hz - 35 KHz
Sensitivity (1W@1m): 87 dB
Nominal Impedance: 8 Ohms
Power Handling Single (RMS): 60 W
System Power Handling (RMS): 100 W
Recommended Amplifier Requirements: 10 - 100 W
Maximum SPL (dBA): 105
Bass Alignment: Bass reflex - rear ported
Drive Unit Complement: 1 x 100mm (4“) MMP®II cone mid-bass driver.
1 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 198 x 125 x 140 mm
(7 13/16 x 4 15/16 x 5 1/2)
Weight (each):
Kg (lbs) 2 (4 3/8)

Dimensions (mounted on wall without bracket) :27" H x 6" W x 1-1/2" D (68.6cm x 15.2cm x 38mm)
Dimensions (mounted on wall with bracket) :27" H x 6" W x 1-9/16" D (68.6cm x 15.2cm x 40mm)
Dimensions (on table stand) :30" H (76.2cm)
Table-stand base dimensions :8-11/16" W x 4-3/4" D (222mm x 136mm)
Driver complement :2 each 3-1/2" (90mm) XTDD anodized Aluminum dome mid/bass drivers pressure-coupled to 4 each 3-1/2" (90mm) dome low-bass radiators, 1 each 1" (25mm) Pure Aluminum Dome Tweeter
Frequency response (overall on wall) :92Hz – 30kHz
Sensitivity :92dB
Impedance :8 Ohms nominal
Recommended amplifier power :20 - 100 Watts per channel
Enclosure :Extruded Aluminum
Product weight (without table stand) :5.1 lbs. (2.3kg)
Supplied accessories :Smoked glass base table stand, wall mount bracket, adjustable support foot for horizontal shelf placement, magnetic logos
Packaging :One to a carton
Available finishes :High gloss black