| Content |
Take your keyboard experience to the next level by connecting it directly to the computer. Using the keyboard's MIDI output, connect the cable to the USB port on your computer. Reach your full potential using a vast selection of computer programs, software, and MIDI devices to create your own desktop studio.
Specifications | Indicators | Power indicator, MIDI IN indicator, MIDI OUT indicator | | Power Supply | USB bus power supply (computer supplies the power) | | Dimensions | 3.44" W x 1.44" D x .64" H | | Weight | Approximately 0.3 lb. | | Package Contents | USB-MIDI interface (UX16 main unit), CD-ROM (Includes Owner's Manual, drivers, OMS, and Acrobat® Reader |
| Portable Audio-/Midi-Interface for iPhone and iPad with Lightning Connection; 44.1/48kHz, 16/24 Bit; 2x Line-Out 1/4" TS (L/R Stereo); 1x Stereo Headphone-Out 1/8" Mini-TRS with Volume Control; MIDI-Input; Micro-USB Connection; Dimensions: 60 x 74 x 23 mm (WxDxH); Weight: 0,067 kg; colour: black;, System requirements: iOS 8 oder higher, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th.
Portable Audio-/Midi-Interface for iPhone and iPad with Lightning Connection; 44.1/48kHz, 16/24 Bit; 2x Line-Out 1/4" TS (L/R Stereo); 1x Stereo Headphone-Out 1/8" Mini-TRS with Volume Control; MIDI-Input; Micro-USB Connection; Dimensions: 60 x 74 x 23 mm (WxDxH); Weight: 0,067 kg; colour: black;, System requirements: iOS 8 oder higher, iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th.
The black plugKEY from Korg is an audio and MIDI interface designed for use with iOS Lightning devices and any MIDI controller with a 5-pin DIN connector. The portable interface has a built-in Lightning cable to connect to your device, while the micro-USB charging port keeps your device charged while in use. Additionally, the plugKEY offers a stereo 1/8" headphone output with a dedicated volume knob that controls both the headphone and the two high quality 1/4" stereo outputs. The 5-pin DIN MIDI connector mitigates any issues with latency and offers excellent performance when using iOS apps. Korg has made available two free apps, Gadget Le and Module Le, to get you started.
- Connect plugKEY to your iOS device and a 5-pin DIN MIDI controller
- “Made for iPod/iPhone/iPad" certification obtained from Apple
- Two studio-quality 1/4" jack audio outputs
- 1/8" stereo headphone output
- Volume control
- Use while charging your iOS device
- Compact design can be taken anywhere
- Free apps that let you start immediately playing and producing music
| OS Compatibility |
iOS 8 or later |
| Device Compatibility |
iPhone 6s Plus, iPhone 6s, iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPad mini 4, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad mini, iPad 4th generation, iPod touch (5th, and 6th generation) |
| Connectors |
Apple Lightning
MIDI IN: 5-Pin Din jack
Charging Port: 5 VDC micro-USB |
| Audio Outputs |
Audio Line Outs (L/MONO, R): 1/4" / 6.35 mm phone jacks
Headphones: Stereo 1/8" / 3.5 mm mini phone jack |
| Dimensions (W x D x H) |
2.4 x 2.9 x 0.9" / 60.0 x 74.0 x 23.0 mm |
| Weight |
2.4 oz / 69.0 g |
|
2-in/2-out MIDI interface > 32 discrete MIDI input channels, 32 discrete MIDI output channels
standalone functionality > MIDI merge and THRU
USB bus power > requires no external power supply
class-compliant operation with Windows XP, Vista and Mac OS X > true plug-and-play functionality
compact and lightweight > mobile or desktop use
Compatibility
Class-compliant
MME
Mac OS X Core MIDI
Minimum System Requirements (PC)
Windows XP *
Windows XP (SP2), Pentium 3 – 800 MHz
256 MB RAM, Native USB port, DirectX 9.0c
Windows Vista
Windows Vista (32-bit / 64-bit editions), Pentium 3 - 1 GHz
1 GB RAM, Native USB port
* Home and Professional Edition only. Windows Media Center Edition, Windows 2000, NT, Me and 98 are not supported.
M-Audio suggests you also check the minimum system requirements for your software, as they may be greater than the above.
Minimum System Requirements (Mac)
Macintosh **
Macintosh G4 500 w/ Mac OS X 10.4.9
Macintosh G4 867 w/ Mac OS X 10.5.1
512 MB RAM, Native USB port
**G4 accelerator cards not supported
M-Audio suggests you also check the minimum system requirements for your software, as they may be greater than the above.
| The SmartRig-2 XLR Audio Adapter is an easy solution to connect any professional microphone to an iPhone, iPod touch, or iPad and Android devices.
As a high-quality microphone preamp, SmartRig allows you to use professional stage microphones or high-end studio microphones to be used as reporter mics in live situations with your mobile iOS or Android devices as the mobile transmitter to your studio.
it also supports HD Voice with its bandwidth of 20-20.000 Hz
A great complementary product for D&R GSM Hybrid is the Audio Adapter SmartRig 2 that, can offer as an \"in the Field\" product.
Together with a dynamic or condenser Mic, headphones and a smart-phone (Android or Apple) running a recording app on it could be your complete mobile reporter set for a minimum of investment.
Live reporting to the Studio in Voice-HD directly to D&R GSM Hybrid is now possible (depends on your GSM and provider)
Features
- XLR microphone input connector
- +48V phantom power for use with condenser microphones
- 3.5 mm Headphone output for monitoring
- On/Off/+48V switch
- Gain control
- Power/Phantom Power provided by 9V battery (not included)
Specifications
- Frequency Response: 20Hz to 20kHz (+/- 1.5dB)Noise: -98 dB full band (with Phantom Power)
- Maximum Output Level: 2 Vrms
- Distortion: 0.025% THD
- Phantom Max Current: 13mA
- Dimensions: 8.8cm x 4.1cm x 4.2cm
- Weight: 75g (2.57oz)
Included in the box
- 1x SmartRig
- 1x User Guide
- 1x Velcro Strip
- 1x Warranty Card
| The AI-Micro is an ultra-compact dual-channel audio interface that can connect almost any microphone with a 3.5mm connector to computers and mobile devices. It delivers broadcast-grade audio and includes a high-quality headphone output.
In the box :
- 1 x AI-Micro
- 1 x USB Type-C to Lightning (SC21, 300mm length)
- 1 x USB Type-C to USB Type-C (SC22, 300mm length)
- 1 x USB Type-C to USB Type-A (SC23, 300mm length)"
The interface's two mic inputs are auto-sensing jacks, allowing them to accept signal from a broad range of TRS/TRRS microphones without needing additional adapters. Monitor the live signal or playback via the built-in, zero-latency headphone port, and connect to virtually any mobile device or computer with the supplied USB Type-C, USB Type-A, and Lightning cables.
With two mini-jack mic inputs and a USB Type-C output, the AI-Micro lets you simultaneously record two mics to your computer or mobile device at up to 24-bit / 48 kHz digital resolution. It's ideal for interviews, podcasts, live streaming, and more. Alternatively, input 1 can be configured as a single stereo TRS input for use with stereo microphones.
The two 3.5mm inputs are auto sensing and detect whether a TRS or TRRS microphone is connected, automatically switching to accommodate a wide variety of separately available mics such as the SmartLav+, Lavalier GO, RODELink Lav, any VideoMic with 3.5mm outputs, and more.
The AI-Micro also features a high-quality 3.5mm headphone output for zero-latency audio monitoring and playback.
Thanks to the supplied cables, the AI-Micro can connect seamlessly to USB Type-A, USB Type-C, and Lightning devices. Use it with your Mac/Windows computer, iPhone, iPad, or Android smartphone/tablet.
It is compatible with the Rode app suite including Rode Central, Rode Connect, and Rode Reporter, for accessing expanded features and functionality, on-the-go configuration, and broadcast-quality recording on any device.
Easily held in the palm of your hand or tucked away in your pocket, the AI-Micro boasts an exceptionally small footprint. Plus, it is bus powered, so you never have to worry about swapping batteries or recharging it.
- Ultra-compact dual-channel audio interface
- Compatible with USB-A, USB-C and Lightning devices
- Two auto-sensing TRS/TRRS microphone inputs
- 3.5mm headphone output
- Expanded features and functionality via RØDE app suite, including RØDE Central, RØDE
Connect and RØDE Reporter
COMPATIBLE RØDE PRODUCTS :
- SmartLav+
- Lavalier GO
- RØDELink Lav
- All VideoMics with 3.5mm output
- SC15, SC16, SC17, SC18, SC19
| Frequency Response |
20Hz to 20kHz |
| Headphone Output Power |
125mW into 32Ω |
| Input Dynamic Range |
100dB A-Weighted |
| Gain Range |
0-26dB analog gain |
| Analog Inputs |
2 x 3.5mm auto-sensing TRS/TRRS |
| Analog Outputs |
3.5mm TRS headphone output |
| Computer Connectivity |
USB Type-C |
| OS Requirements |
macOS Big Sur and higher
Windows 10 (Build 19041) and higher
iOS 14 and higher
Android 9.0 and higher |
| Simultaneous I/O |
2/2 |
| Number of Preamps |
2 |
| Bit Depth |
24-bit |
| Sample Rates |
44.1/48kHz |
| Power Requirements |
Bus Powered |
| Dimensions (mm) |
40 x 11.1 x Height: 38.2 |
| Weight (g) |
13 |
| Your go-to mic to goIntroducing the First studio quality
mic preamp for the iOS platform
Here's how you use it: Take the microphone you use every day on stage or in the studio and plug it into your iOS device. It's that simple. Need Phantom Power? Flip the "Phantom Power" switch. Congratulations, you've just become a professional user.
This is perhaps the most important product introduction for musicians and the rest of the civilized world since the iPod and iPad. Now, thanks to the iRig Pre, you can hook your favorite microphone to your iOS device and join the mobile music revolution. Create music any time, anywhere with your own high quality microphones on your iPhone, iPod touch or iPad.
So now if you want to record that special riff using your own ribbon microphone and mix it on your iPhone, you can. Simply plug the iRig Pre into the headphone jack of your iOS device, activate phantom power if necessary, launch your recording software and wail away.
Hey, is that a Preamp in your pocket?
Why yes, as a matter of fact it is! The iRig PRE sports an ultra-compact design so it fits pretty much anywhere. Just slightly larger than a 9 volt battery, you'll be amazed at how quickly you'll misplace your iRig PRE. But don't let the small size fool you. iRig Pre is a professional sounding mic preamp that will dazzle you and your friends.
Specs iRig PRE Specifications
- Frequency response: from 20 Hz to 20 kHz +/- 1.5dB
- Noise: -98 dB fullband, phantom power ON
- Maximum output level: 2 Vrms
- Distortion: 0.025% THD
- Phantom max current: 6mA
- Battery duration (Alkaline 9V cell): approx 30 hours when phantom is off, approx 10 hours when phantom is on
| Package includes |
Dimensions |
- iRig PRE
- 9V Battery
- Velcro Strip
|
- 32mm/1.26" x 35mm/1.38" x 83mm/3.27“
(W x L x H)
- Cable lenght: 450mm/17.72“
(Connector included)
- Weight: 100g/3.53oz (Battery included)
|
Requirements iOS Devices
iRig PRE is compatible with iPhone 5s, iPhone 5c, iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS, iPod touch (5th, 4th and 3rd generation), iPad Air, 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 4.3 or later is required.
Android Devices
Works with most Android devices including: Google Nexus S, HTC Desire HD, Samsung Galaxy S III, Samsung Galaxy S II, Samsung Galaxy W, Samsung Galaxy S, Samsung Galaxy Note, Samsung Galaxy Nexus, Samsung Galaxy Tab 10.1, Samsung Galaxy Tab 7 plus.
Mac®: Most Mac computers starting from late 2008 are compatible with the exception of the Mac Pro line.
To check if your Mac is compatible select: About This Mac > More Info > System Report > Audio
and check that "External Microphone / iPhone headset" is appearing on the list of included features. |
Reviews
There are no reviews yet.