Audio Technica AT-XP3 Cartridge with Conical Stylus

59.00 με ΦΠΑ 24%

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

EAN: N/A
Υπολογισμός δόσεων
CompareAdd to wishlist Υποβολή Καλύτερης Τιμής
Διαθεσιμότητα: Διαθέσιμο Διαθέσιμο Κωδικός προϊόντος: AT-XP3 Κατηγορία:
Frequency Response: 20 to 18,000 Hz Channel Separation: 20 dB (1 kHz) Vertical Tracking Angle: 20 degrees Vertical Tracking Force: 2.0 to 4.0 g (standard 3g) Stylus Construction: Bonded Round Shank Recommended Load Impedance: 47,000 Ω Coil Impedance: 6,700 ohms (1 kHz) Coil Inductance: 550 mH (1 kHz) Output Voltage: 5.5 mV (at 1 kHz, […]

 

Διαβάστε περισσότερα

  • Frequency Response: 20 to 18,000 Hz
  • Channel Separation: 20 dB (1 kHz)
  • Vertical Tracking Angle: 20 degrees
  • Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
  • Stylus Construction: Bonded Round Shank
  • Recommended Load Impedance: 47,000 Ω
  • Coil Impedance: 6,700 ohms (1 kHz)
  • Coil Inductance: 550 mH (1 kHz)
  • Output Voltage: 5.5 mV (at 1 kHz, 5 cm/sec)
  • Output Channel Balance: 2.0 dB (1 kHz)
  • Stylus Shape: Conical
  • Cantilever: Carbon reinforced ABS
  • Static Compliance: 20 x 10 – 6 cm / dyne
  • Dynamic Compliance: 6.0 x 10 – 6 cm / dyne (100 Hz)
  • Mounting: Half-inch
  • Cartridge Weight: 6.2g
  • Dimensions (H x W x D): 17.2 x 17.8 x 28.3mm
  • Accessories Included: Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver
  • Model: AT-XP3
  • Recommended Load Capacitance: 100-200 pF
  • Replacement Stylus: ATN-XP3
  • Stylus Size: 0.6 mil

The AT-XP3 cartridge is specially designed for DJs. It features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body, has a tracking force of 2 to 4 grams, and offers a powerful output level of 5.5 mV. Its 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity. And the cartridge design provides maximum visibility of the stylus tip. The AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

Βάρος 0.3 kg

Αξιολογήσεις

Δεν υπάρχει καμία αξιολόγηση ακόμη.

Κάνετε την πρώτη αξιολόγηση για το προϊόν: “Audio Technica AT-XP3 Cartridge with Conical Stylus”

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Quick Comparison

Audio Technica AT-XP3 Cartridge with Conical Stylus removeORTOFON Concorde Scratch ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeAUDIO TECHNICA AT-MONO3LP Κεφαλή πικαπ removeORTOFON 2M Bronze ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Τύπου Nude Fine Elliptical removeAUDIO TECHNICA AT-MONO3SP Κεφαλή πικαπ removeORTOFON OM PRO S ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ remove
NameAudio Technica AT-XP3 Cartridge with Conical Stylus removeORTOFON Concorde Scratch ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ removeAUDIO TECHNICA AT-MONO3LP Κεφαλή πικαπ removeORTOFON 2M Bronze ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ Τύπου Nude Fine Elliptical removeAUDIO TECHNICA AT-MONO3SP Κεφαλή πικαπ removeORTOFON OM PRO S ΚΕΦΑΛΗ ΜΕ ΒΕΛΟΝΑ remove
ImageAudio Technica AT-XP3 Cartridge with Conical Stylus
SKUAT-XP3ConcordeScratchAT-MONO3LP2MBRONZEAT-MONO3SPOMPROS
Rating
Price59.00 με ΦΠΑ 24%102.00 με ΦΠΑ 24%236.90 με ΦΠΑ 24%345.00 με ΦΠΑ 24%236.90 με ΦΠΑ 24%49.00 με ΦΠΑ 24%
Stock

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

Σε απόθεμα

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Διαθέσιμο κατόπιν παραγγελίας

Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)

AvailabilityΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)Σε απόθεμαΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΔιαθέσιμο κατόπιν παραγγελίαςΜόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)
Add to cart

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Προσθήκη στο καλάθι

Description
Content
  • Frequency Response: 20 to 18,000 Hz
  • Channel Separation: 20 dB (1 kHz)
  • Vertical Tracking Angle: 20 degrees
  • Vertical Tracking Force: 2.0 to 4.0 g (standard 3g)
  • Stylus Construction: Bonded Round Shank
  • Recommended Load Impedance: 47,000 Ω
  • Coil Impedance: 6,700 ohms (1 kHz)
  • Coil Inductance: 550 mH (1 kHz)
  • Output Voltage: 5.5 mV (at 1 kHz, 5 cm/sec)
  • Output Channel Balance: 2.0 dB (1 kHz)
  • Stylus Shape: Conical
  • Cantilever: Carbon reinforced ABS
  • Static Compliance: 20 x 10 – 6 cm / dyne
  • Dynamic Compliance: 6.0 x 10 – 6 cm / dyne (100 Hz)
  • Mounting: Half-inch
  • Cartridge Weight: 6.2g
  • Dimensions (H x W x D): 17.2 x 17.8 x 28.3mm
  • Accessories Included: Two 11 mm installation screws, Two 8 mm installation screws, Two washers, Two Nut, Non-magnetic screwdriver
  • Model: AT-XP3
  • Recommended Load Capacitance: 100-200 pF
  • Replacement Stylus: ATN-XP3
  • Stylus Size: 0.6 mil
The AT-XP3 cartridge is specially designed for DJs. It features a highly-rigid polyphenylene sulfide (PPS)/glass fiber body, has a tracking force of 2 to 4 grams, and offers a powerful output level of 5.5 mV. Its 0.6 mil conical bonded stylus tracks the center of the record groove for reliable performance and excellent fidelity. And the cartridge design provides maximum visibility of the stylus tip. The AT-XP3 cartridge is compatible with any XP or VM95 Series replacement stylus, offering a wide choice of options for every budget and application.

For DJs that require increased tracking ability, the Scratch is up to the task.  Featuring a reinforced rubber suspension, DJs need not worry about compromising sound quality and stylus life when working with higher tracking forces.  With solid bass reproduction and extended highs, the Scratch is great for any style, providing energetic, in-your-face sound.

Output voltage at 1000Hz, 5cm/sec.

7 mV

Channel balance at 1kHz

1,5 dB

Channel separation at 1kHz

25 dB

Channel separation at 15 kHz

15 dB

Frequency range at -3dB

20-20.000 Hz

Frequency response

20-15.000 Hz 3dB/-2dB

Tracking ability at 315 Hz at recommmende tracking force

80 μm

Compliance, dynamic lateral

6 μm/m N

Stylus type

Spherical

Stylus tip radius

R 18 μm

Tracking force range

3,0-5,0 g (30-50 mN)

Tracking force recommended

4,0 g (40 mN)

Tracking angle

20°

Internal impedance, DC resistance

750 Ohm

Internal inductance

450 mH

Recommended load resistance

47 kOhm

Recommended load capacitance

200-600 pF

Cartridge weight

18,5 g

Replacement stylus unit

Scratch

 

Μονοφωνική κεφαλή

Σώμα: Aluminium / Synthetic Resin

Τύπος: Moving Coil

Πηνία: PCOCC

Cantilever: Aluminium Pipe

Έξοδος: 1.2 mV

Απόκριση Συχνότητας: 20Hz - 20KHz

Βάρος Ανάγνωσης: 1.5-2.5 gr (standard 2.0 gr)

Εσωτερική Αντίσταση: 40 Ω

Συνιστώμενη Αντίσταση: 400 Ω

Ενδοτικότητα: 7 x 10-6 cm/dyne

Βάρος: 6.8 gr

2M Bronze - The 2M series were developed in conjunction with Danish designer Møller Jensen Design – the same designer who designed the award winning MC Jubilee and Kontrapunkt series.  Inspired by the facets of a diamond, whose contours gracefully trace the grooves on a recordʼs surface, the 2Mʼs handsome elegance establishes a great combination of form and functionality. 

2M are designed for precise and accurate retrieval of the information in the record groove. Our philosophy is to play the record sound as accurate as possible, without coloring the sound. We have optimized the design for ease of mounting the cartridge, weight and size to fit the most common turntables at the market today.

The name 2M was selected among several ideas. We wanted a modernname which should be easy to pronounce and to remember, and therefore an alpha numerical name was chosen. 2M means MM, which is the abbreviation for moving magnet. 

The 2M Bronze features a nude Fine Line diamond stylus, which is particularly suited for demanding applications.  The slim profile of the Fine Line stylus will track even the highest frequency information, making it a must for discerning listeners.  Additionally, its larger footprint ensures reduced distortion and record wear.

The cartridge body used for the 2M Bronze is manufactured from a newly-developed Noryl plastic/glass combination, a revolutionary material which ensures high rigidity while eliminating unwanted resonances.  The 2M Bronze uses a special upgraded engine, featuring split pole pins with a silver plated copper wire. 


TECHNICAL DATA
Output voltage at 1000 Hz, 5cm/sec. 5 mV
Channel balance at 1 kHz 1 dB
Channel separation at 1 kHz 26 dB
Channel separation at 15 kHz 15 dB
Frequency range at - 3dB 20-29.000 Hz
Frequency response 20-20.000 + 2 / - 0 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 22 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Tracking force range 1,4-1,7g (14-17 mN)
Tracking force, recommended 1,5 g (15 mN)
Tracking angle 20°
Internal impedance, DC resistance 1,2 kOhm
Internal inductance 630 mH
Recommended load resistance 47 kOhm
Recommended load capacitance 150-300 pF
Cartridge colour, body/stylus Black/Bronze
Cartridge weight  7,2 g
Replacement stylus unit 2M Bronze

Μονοφωνική κεφαλή ειδικά για δίσκους 78 rpm Shellac

Σώμα: Aluminium / Synthetic Resin

Τύπος: Moving Coil

Πηνία: PCOCC

Cantilever: Aluminium Pipe

Έξοδος: 1.2 mV

Απόκριση Συχνότητας: 45Hz - 7KHz

Βάρος Ανάγνωσης: 3.0-7.0 gr (standard 5.0 gr)

Εσωτερική Αντίσταση: 40 Ω

Συνιστώμενη Αντίσταση: 400 Ω

Ενδοτικότητα: 3.5 x 10-6 cm/dyne

Βάρος: 6.8 gr

A budget cartridge that out performs a lot of other top-of-the-line models.

No need to go broke to get an affordable, tough-as-nails scratching tool.

Technical Data:

  • Output voltage at 1000 Hz, 5cm/sec: 5 mV
  • Channel balance at 1 kHz: 2 dB
  • Channel separation at 1 kHz: 20 dB
  • Channel separation at 15 kHz: 15 dB
  • Frequency range at - 3dB: 20-20.000 Hz
  • Frequency response: 20-18.000 Hz + 3 / - 2 dB
  • FIM distortion at recommended
    tracking force, DIN 45.542:
  • Tracking ability at 315Hz at
    recommended tracking force: 70 µm
  • Compliance, dynamic, lateral: 7 µm/mN
  • Stylus type: Spherical
  • Stylus tip radius: R 26 µm
  • Equivalent stylus tip mass: 0,5 mg
  • Tracking force range: 3,0-5,0 g (30-50 mN)
  • Tracking force, recommended: 4,0 g (40 mN)
  • Tracking angle: 20°
  • Internal impedance, DC resistance: 750 Ohm
  • Internal inductance: 450 mH
  • Recommended load resistance: 47 kOhm
  • Recommended load capacitance: 200-600 pF
  • Cartridge colour: Black
  • Cartridge weight: 5 g
  • Replacement stylus unit: PRO S
Weight0.3 kg0.18 kg0.05 kg0.70 kg0.05 kg0.50 kg
DimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/Δ
Additional information
Βάρος 0.3 kg
Βάρος 0.18 kg
Βάρος 0.05 kg
Βάρος 0.70 kg
Βάρος 0.05 kg
Βάρος 0.50 kg