| Content |
The Soundweb London BLU-160 offers configurable I/O, configurable signal processing and a high bandwidth, fault tolerant digital audio bus.
The BLU-160 has open architecture which is fully configurable through HiQnet™ London Architect. A rich palette of processing and logic objects and a "drag and drop” method of configuration provide a simple and familiar design environment.
This processor features a low latency, fault tolerant digital audio bus of 256 channels which uses standard Category 5e cabling giving a distance of 100m between compatible devices. Fiber media converters can be used to increase the distance between devices to over 40km.
Four card slots which accommodate analog inputs, analog outputs, digital inputs and digital outputs in banks of four facilitate many different device I/O configurations.
Analog Input Cards provide software configurable gain in 6dB steps up to +48dB per channel and software selectable Phantom Power per channel. Digital Input Cards and Digital Output Cards process AES/EBU and/or S/PDIF audio and offer a variety of clocking and syncing options. (Further information about the I/O cards can be found on dedicated datasheets)
Phantom Power, Sync, Signal Present and Clip information per channel is easily accessible, without the requirement for a PC, from clear front panel LED indication. Device-specific information such as Device Name, Device Type, Firmware Version Number, Time, IP Address and Subnet Mask is available from the front panel display. A bi-directional locate function allows devices to be identified both from and within HiQnet London Architect.
12 Control Inputs and 6 Logic Outputs allow the BLU-160 to be integrated with GPIO compatible devices. The Soundweb London Interface Kit, comprehensive documentation which details how Soundweb London systems can be integrated with third party control systems, is included within the installation of HiQnet London Architect.
The BLU-160 and the other members of the Soundweb London family provide the building blocks of the perfectly tailored system solution.
Features - Four Input / Output Card Slots
- Configurable Inputs / Outputs
- Analog Inputs (with Phantom Power per Channel)
- Analog Outputs
- Digital Inputs (AES/EBU and S/PDIF)
- Digital Outputs (AES/EBU and S/PDIF)
- Configurable Signal Processing
- Rich Palette of Processing and Logic Objects
- 256 Channel, Low Latency, Fault Tolerant Digital Audio Bus
- Clear Front Panel LED Indication
- Informative Front Panel Display
- Bi-Directional Locate Functionality
- 12 Control Inputs and 6 Logic Outputs for GPIO Integration
- Soundweb London Interface Kit for Third Party Control System Integration (Documentation)
- HiQnet Device
- Configuration, Control and Monitoring from HiQnet London Architect
|
Ψηφιακός επεξεργαστής ηχείων, 24 bit Delta-Sigma AD/DA, 2 in 6 out, με διάφορους τύπους φίλτρων, παραμετρικά EQ, delays, δυναμικούς επεξεργαστές. Ψηφιακή είσοδο AES/EBU (2 Ch.), USB θύρα επικοινωνίας με υπολογιστή.
Based on a two-in, six-out topology, the DC-One is designed primarily for users of small-to-medium sized sound systems in both mobile and installed applications. While the unit is an all-new development based on a powerful SHARC processor, it is 100 percent compatible with all settings from other Electro-Voice signal processors. A large part of DC-Oneʼs development was aimed at ensuring that users can easily handle its serious digital horsepower and high-end audio performance. Free. PC-Editor software is available, or the DC-One can be operated via the front panel.
A/D Conversion 24-Bit Delta-Sigma
A/D Conversion 24-bit/sigma-delta (linear phase) 128 times oversampling
Analog Inputs 2 XLR (Electronically Balanced), 2 XLR THRU OUT (Electronically Balanced)
Analog Outputs 6 XLR (Electronically Balanced)
Control Protocol Front Panel USB Connector
D/A Conversion 24-bit/sigma-delta 128 times oversampling
D/A Conversion 24-Bit Delta-Sigma
Data Format 24-Bit
Digital Inputs 1 XLR AES/EBU (2 Ch)
Dynamic Range 111 dB (unweighted, band limited 22 Hz - 22 kHz)
Electronics Type Processor
FIR-Drive No
Frequency Response 10 Hz - 22 kHz (±0.5 dB)
Input Impedance (Balanced) 10 kΩ
Internal Processing 32-Bit Floating Point
Mains Voltage 100-240 VAC
Maximum Input Voltage 8.7 V / +21 dBu (Without -6 dB Analog Pad Engaged)
Maximum Output Voltage 8.7 V / +21 dBu
Nominal Input Voltage 1.23 V / +4 dBu
Nominal Output Voltage 1.23 V / +4 dBu
Output Impedance (Balanced) 50 Ω
Power Consumption 25 W
Sample Rate 48 kHz
THD+N < 0.01% (band limited 22 Hz - 22 kHz)
Height 1RU 44.45 mm (1.75“)
Width 482.6 mm (19“)
Depth 355.6 mm (14“)
Weight Net 4.6 kg (10.14 lbs) |
| Τροφοδοσία ρεύματος: |
100-240 V AC, 50/60 Hz
6 V DC 800 mA |
| Σύνδεση ρεύματος: |
Είσοδος δικτύου μέσω ομοαξονικού βύσματος τροφοδοσίας (M) καλώδιο τροφοδοσίας με μετασχηματιστή εναλλασσόμενου ρεύματος (παρέχεται) |
| Εύρος συχνοτήτων: |
10 - 30000 Hz |
| THD: |
<0,005 % at 1 kHz |
| DSP: |
Ψηφιακός επεξεργαστής σήματος |
| Αντίσταση: |
Είσοδος: 10 kOhm
Έξοδος: 50 Ohm |
| Gain: |
Έξοδος: -50 dB to +12 dB |
| Φίλτρο: |
Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct |
| Καθυστέρηση: |
0 - 5 ms |
| Δυναμικό εύρος: |
Είσοδος: 114 dB
Έξοδος: 110 dB |
| Sample rate: |
67 kHz |
| Συνδέσεις: |
Είσοδος: line μέσω 2 x 3-pin XLR
Έξοδος: line μέσω 6 x 3-pin XLR |
| Συχνότητα Crossover: |
20-20000 Hz |
| Max. level: |
Είσοδος: +22 dBu
Έξοδος: +9 dBu |
| USB θύρα: |
Τύπος B |
| Σύνδεση PC: |
DXO Λογισμικό μέσω USB, το λογισμικό μπορεί να ενημερωθεί |
| Σχεδιασμός περιβλήματος: |
(19") 48.3 cm εγκατάσταση ραφιού 1 U |
| Διαστάσεις: |
Πλάτος: 48,3 cm
Βάθος: 12,8 cm
Ύψος: 4,45 cm |
| Βάρος: |
1,77 kg |
| Λειτουργικό σύστημα: |
Win XP, Win Vista, Win 7, Win 10, OS X 10,5 ή καλύτερα |
|
Μέσω του NLB 60E επιτυγχάνουμε την εποπτεία καθώς και τη λειτουργία των ενισχυτών C Series.
Παρέχεται η δυνατότητα σύνδεσης μέχρι και 60 ενισχυτές C Series
Με τη βοήθεια του υπολογιστή και του αντίστοιχου προγράμματος που παρέχεται από τη LAB GRUPPEN, αυτόματα αναγνωρίζεται το δίκτυο των ενισχυτών C Series και μπορούν να ελεγχθούν, όπως επίσης να πάρουμε πληροφορίες για τη λειτουργία των ενισχυτών.
2XRJ45 IN AND OUT Ethernet Connectors
Auto Sensing 100V-240V AC
2x Contact Closure GPI
1x Voltage Sense GPI
Διαστάσεις: Π: 48.3cm (19”), Y: 4.4cm (1U), B: 20,8cm (8,2”)
Βάρος: 2,25 kg
|
Ψηφιακός επεξεργαστής ηχείων 2 εισόδων, 6 εξόδων με δυνατότητα ρυθμίσεων για, crossover, delay, PEQ, compressor, limiter, gain, polarity. Διαθέτει ψηφιακή είσοδο AES/EBU και υποδοχή RJ-45 ethernet για σύνδεση με H/Y. Υποστηρίζει το λογισμικό DME Designer της ΥΑΜΑΗΑ.
| Sampling Frequency | Internal Clock | 96kHz | | External Clock | Normal Rate | 44.1, 48kHz (±0.1%) | | Double Rate | 88.2, 96kHz (±0.1%) | | Signal Delay | 761µsec Input to Output, fs = 96kHz | | Frequency Response | 20Hz -40kHz (TYP 0dB, MAX +0.5dB, MIN -1.0dB), fs=96kHz, RL=600ohms | | Total Harmonic Distortion | 0.007% (+22dBu@1 kHz),
0.05% (+4dBµ@20 Hz - 40kHz)
fs=96kHz, RL=600ohms;
measured with 18dB/octave filter @80kHz | | Hum & Noise | TYP -82dBu,
fs=96kHz, RL=600ohms, Rs=150 ohms;
measured with 6dB/octave filter @12.7kHz;
equivalent to a 20kHz filter with ∞ dB/octave attenuation. | | Dynamic Range | 106dB AD+DA
fs=96kHz, RL=600ohms;
measured with 6dB/octave filter @12.7kHz;
equivalent to a 20kHz filter with ∞dB/octave attenuation. | | Crosstalk @1kHz | -80dB INPUT to Output
fs=96kHz, measured with 18dB/octave filter @80kHz | | Power Consumption | 30W | | Dimensions (W x H x D) | 480 x 44x 360.2mm | | Net Weight | 4.2kg |
| The LD Systems X223 is a stereo 2 way / mono 3 way crossover in standard 19"/1U rack format. Its rugged construction, high quality and robust knobs as well as the integrated power unit are rarities in this price range. It provides a mono sub output, an adjustable crossover frequency for each channel, adjustable LF/HF and input gains, phase reverse controls, switchable 40 Hz High-Pass filters and symmetrical XLR In- and Outputs. With the LD Systems X223 you get a crossover fulfilling the professional standards and offering great quality and sound characteristics.
Product type
Signal Processors
Version
2-way stereo/3-way mono
Frequency response
20 - 20.000 Hz
Signal-to-noise ratio
> 93 dB
Total Harmonic Distortion (THD)
< 0.004 %
Crosstalk
< - 80 (20 - 20.000 Hz) dB
Max. input level
+21 (balanced or unbalanced) dBu
Max. output level
+21 (balanced or unbalanced) dBu
Input impedance (kOhms)
50000 kOhm
Output impedance
200 Ohm(s)
Controls
2 x crossover frequency low/high, 2 x crossover low/mid, 2 x high gain, 2 x highpass (40 Hz), 2 x input gain, 2 x low gain, 2x frequency switch x1/x10, 4 x inv switch, LF sum, Mono/stereo mode
Indicators
2 x clip, 2 x crossover x 10, 2 x highpass, 4 x inv., mono, stereo
Line input connectors
XLR
Line output connectors
XLR
Mains connector
IEC socket
Operating voltage
220 V AC - 240 V AC
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.