Content |
CA 12
The CA12 professional power amplifier is designed to achieve unsurpassed sonic performance and long-term reliability--even when operating under extreme stress--in touring or fixed installation applications. Application The CA? series provides tremendous value in proven amplifier technology.CAs form the backbone of discriminating rental systems and high-power club installations worldwide. Auditoriums, churches, regional tour sound companies and mobile DJs are all ideal candidates for the CA Series? combination of value and sonic quality. Design Focus The CA Series design provides economical access to the premium sound quality of the Crest Audio Pro Series. Professional power-handling capabilities and exceptional low-end response make this amplifier an ideal choice for installations and touring applications that demand the finest audio quality.
FEATURES: 8 Ohm Stereo - 700 W 4 Ohm Stereo - 1200 W 2 Ohm Stereo - 1400 W 8 Ohm Bridged - 2400 W 4 Ohm Bridged - 2800 W Legendary over-built power supply Toroidal power transformer Latest generation of high-speed, wide-bandwidth output devices Twin-tunnel cooling with back-to-front air flow Dual, rear-mounted, continuously variable-speed fans Balanced male and female XLR inputs with switch-configurable XLR polarity and sensitivity selection Speakon? or five-way binding post output connectors (market dependent) Stereo, parallel, bridged-mono mode selector switch Ground-lift switch Front panel circuit-breaker switch Recessed, stepped attenuators SIGNAL present/active, PROTECT, and ACL LED's Modular construction Powder-coated steel chassis Five-year warranty Dimensions 19" W x 5.25" H x 15" D (483 mm x 134 mm x 381 mm) Weight 67 lbs. (31 kg) |
HPS 2500 is a 2 channel power amplifier that delivers up to 2 x 1400 W RMS @ 2 Ω (2800 W RMS bridged @ 4 Ω).
XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.
Features |
---|
Fast response and low distortion | Easy to configure in stereo / mono / bridge modes | Extensive protective circuits ensure high reliability and operating safety | Front panel signal / clip / protect LED indicators | Minimum load impedance (stereo / mono): 2 Ohm | XLR input connectors | SPEAKON output connectors | 2 unit 19" rack, low weight for easy transportation | Switchable Limiter |
AMPLIFIER SPECIFICATIONS |
---|
Power output stereo 2Ω: | 2 x 1400 Watt rms | | Power output stereo 4Ω: | 2 x 1100 Watt rms | | Power output stereo 8Ω: | 2 x 700 Watt rms | | Power output bridged 4Ω: | 2800 Watt rms | | Power output bridged 8Ω: | 2200 Watt rms | | Frequency Response: | 20 Hz ÷ 20 kHz | | Signal/noise rate: | 106 dB | | Damping factor: | > 300 | | Slew rate: | 50 V/μS | |
INPUT SECTION |
---|
Input connector: | xlr | | Input sensitivity: | 1.4 dBm/V RMS | | Input impedance: | 20 kΩ (balanced), 10 kΩ (unbalanced) kΩ | |
OUTPUT SECTION |
---|
Output connector: | Speakon | |
SYSTEM PARAMETERS |
---|
Cooling: | Forced | | Voltage gain: | 32 – 26 dB | | Amplifier class: | H | |
POWER REQUIREMENT |
---|
Operating voltage: | 220 ÷ 240 V (50 / 60 Hz) V ~ Hz | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 88/3.4 mm/inch | | Width: | 482/18.9 mm/inch | | Depth: | 420/16.5 mm/inch | | Net Weight: | 19/41,8 Kg/Lbs |
|
Number of Channels: 2
Output Power: (per channel)
8 ohms 575W
4 ohms 1025W
2 ohms 1750w
Output Power: (bridged)
8 ohms 2050W
4 ohms 3500w
THD%: (@1dB below max output)
@ 1kHz |
Single digital (Class D) amplifier with switching power supply 1200W/70V/100V. Protection against overheating, overcurrent and short circuit output. Features & priority entry program (program override) for message playback emergency. Highpass filter OFF/200Hz/400Hz. Remote control function ON / OFF. Power Supply DC 24V, AC 220 ~ 240V 50/60Hz. |
Number of Channels: 2
Output Power: (per channel)
8 ohms 700W
4 ohms 1350W
2 ohms 2400W
Output Power: (bridged)
8 ohms 2700W
4 ohms 4800W
THD%: (@1dB below max output)
@ 1kHz |
Τελικός ενισχυτής 2x1050@4Ω, Class-D, οnboard crossover, delay, limiter, sampling frequency rate 48 kHz
Τελικός ενισχυτής ισχύος 2x1050@4Ω και 2x800W@8Ω, ανασχεδιασμένος ενισχυτής Class-D με custom LSI, ενσωματωμένο παραμετρικό equalizer, crossover, filter, delay και limiter, έτοιμα presets για ηχεία της Yamaha, ποσοστό συχνότητας δειγματοληψίας 48 kHz, A/D D/A μετατροπείς AD/DA: 24-bit linear, 128 times over sampling, Συνολική αρμονική παραμόρφωση 0.1% (1kHz, 10W), 0.3% (1kHz, Half power), απόκριση συχνότητας ±1.0dB (1W, 8Ω, 20Hz to 20kHz), S/N ratio 101dB (A-weighted, 8Ω, Gain setting = +14dBu), Crosstalk : Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt), εσωτερική αντίσταση : 20kΩ (Balance), 10kΩ (Unbalance), I/O connectors : Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2, Line input : XLR-3-31 x2, 1/4 "PHONE(TRS) x2, Latency : 1.5ms, Ψύξη Διαστάσεις : 48 x 8.8 x 38.8, Βάρος 7,2 κιλά.
Tύπος: | Τελικός Ενισχυτής | Ισχύς: | 1050W x 2 / 4Ω, 2 x 800W x 8Ω | Απόκριση Συχνότητας: | - | Είσοδοι: | XLR-3-31 x2, 1/4 "PHONE(TRS) x2 | Έξοδοι: | Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2 | Συνολική Αρμονική Παραμόρφωση (THD): | 0.1% (1kHz, 10W), 0.3% (1kHz, Half power) | Eιδικά Στοιχεία: | - | Διαστάσεις (Π x Y x B): | 48 x 8.8 x 38.8 εκ. | Rack Mount: | Ναι | Bάρος: | 7,2 κιλά | Τύπος: | Low Impedance | Ισχύς 4Ω: | 1000W-1500W | Rack Mount: | 2U |
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.