CRESTAUDIO CA 12 2X1200W POWER AMPLIFIER

	CRESTAUDIO CA 12 2X1200W POWER AMPLIFIER remove	RAM AUDIO S-3000 Ενισχυτής Ισχύος 2x1570 Watts remove	YAMAHA PX-8 Τελικός Ενισχυτής 2x1050@4Ω remove	CROWN XTi-4002 2x1200W@4Ω ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ remove	CROWN XLi-3500 Tελικός ενισχυτής 2x1350W/4Ω-1000W/8Ω-1Χ2700W bridge 8Ω 2U Rack remove	DYNACORD DSA-8212 ΔΙΚΑΝΑΛΟΣ ΕΝΙΣΧΥΤΗΣ 2X1800W/2Ω - 2X1200W/4Ω - 2X750W/8Ω remove
Name	CRESTAUDIO CA 12 2X1200W POWER AMPLIFIER remove	RAM AUDIO S-3000 Ενισχυτής Ισχύος 2x1570 Watts remove	YAMAHA PX-8 Τελικός Ενισχυτής 2x1050@4Ω remove	CROWN XTi-4002 2x1200W@4Ω ΤΕΛΙΚΟΣ ΕΝΙΣΧΥΤΗΣ remove	CROWN XLi-3500 Tελικός ενισχυτής 2x1350W/4Ω-1000W/8Ω-1Χ2700W bridge 8Ω 2U Rack remove	DYNACORD DSA-8212 ΔΙΚΑΝΑΛΟΣ ΕΝΙΣΧΥΤΗΣ 2X1800W/2Ω - 2X1200W/4Ω - 2X750W/8Ω remove
Image
SKU	CA 12	S-3000	H060.00056	XTI-4002	XLI-3500	E009305
Rating
Price	€3,126.03 €2,563.34 με ΦΠΑ 24%	€1,835.20 €1,453.27 με ΦΠΑ 24%	€1,249.00 €1,099.00 με ΦΠΑ 24%	€1,440.26 €1,186.00 με ΦΠΑ 24%	€1,262.77 €1,055.50 με ΦΠΑ 24%	€1,622.40 €1,296.00 με ΦΠΑ 24%
Stock	Εξαντλημένο	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας	Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)	Σε απόθεμα	Διαθέσιμο κατόπιν παραγγελίας
Availability	Εξαντλημένο	Διαθέσιμο κατόπιν παραγγελίας	Διαθέσιμο κατόπιν παραγγελίας	Μόνο 1 απομένουν σε απόθεμα (επιπλέον μπορεί να ζητηθεί κατόπιν παραγγελίας)	Σε απόθεμα	Διαθέσιμο κατόπιν παραγγελίας
Add to cart	Διαβάστε περισσότερα	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι	Προσθήκη στο καλάθι
Description
Content	CA 12 The CA12 professional power amplifier is designed to achieve unsurpassed sonic performance and long-term reliability--even when operating under extreme stress--in touring or fixed installation applications. Application The CA? series provides tremendous value in proven amplifier technology.CAs form the backbone of discriminating rental systems and high-power club installations worldwide. Auditoriums, churches, regional tour sound companies and mobile DJs are all ideal candidates for the CA Series? combination of value and sonic quality. Design Focus The CA Series design provides economical access to the premium sound quality of the Crest Audio Pro Series. Professional power-handling capabilities and exceptional low-end response make this amplifier an ideal choice for installations and touring applications that demand the finest audio quality.   FEATURES: 8 Ohm Stereo - 700 W 4 Ohm Stereo - 1200 W 2 Ohm Stereo - 1400 W 8 Ohm Bridged - 2400 W 4 Ohm Bridged - 2800 W Legendary over-built power supply Toroidal power transformer Latest generation of high-speed, wide-bandwidth output devices Twin-tunnel cooling with back-to-front air flow Dual, rear-mounted, continuously variable-speed fans Balanced male and female XLR inputs with switch-configurable XLR polarity and sensitivity selection Speakon? or five-way binding post output connectors (market dependent) Stereo, parallel, bridged-mono mode selector switch Ground-lift switch Front panel circuit-breaker switch Recessed, stepped attenuators SIGNAL present/active, PROTECT, and ACL LED's Modular construction Powder-coated steel chassis Five-year warranty Dimensions 19" W x 5.25" H x 15" D (483 mm x 134 mm x 381 mm) Weight 67 lbs. (31 kg)	The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon) OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044 1kHz, 1.0% THD 2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W - 4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W 8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W - Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W P. N. 12dB C.F. 2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W - 4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

Τελικός ενισχυτής 2x1050@4Ω, Class-D, οnboard crossover, delay, limiter, sampling frequency rate 48 kHz

Τελικός ενισχυτής ισχύος 2x1050@4Ω και 2x800W@8Ω, ανασχεδιασμένος ενισχυτής Class-D με custom LSI, ενσωματωμένο παραμετρικό equalizer, crossover, filter, delay και limiter, έτοιμα presets για ηχεία της Yamaha, ποσοστό συχνότητας δειγματοληψίας 48 kHz, A/D D/A μετατροπείς AD/DA: 24-bit linear, 128 times over sampling, Συνολική αρμονική παραμόρφωση 0.1% (1kHz, 10W), 0.3% (1kHz, Half power), απόκριση συχνότητας ±1.0dB (1W, 8Ω, 20Hz to 20kHz), S/N ratio 101dB (A-weighted, 8Ω, Gain setting = +14dBu), Crosstalk : Less than -60dB (Half Power, 8Ω, 1kHz, Vol max input 150Ω shunt), εσωτερική αντίσταση : 20kΩ (Balance), 10kΩ (Unbalance), I/O connectors : Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2,  Line input : XLR-3-31 x2, 1/4 "PHONE(TRS) x2, Latency : 1.5ms, Ψύξη  Διαστάσεις : 48 x 8.8 x 38.8, Βάρος 7,2 κιλά.

 

Tύπος:	Τελικός Ενισχυτής
Ισχύς:	1050W x 2 / 4Ω, 2 x 800W x 8Ω
Απόκριση Συχνότητας:	-
Είσοδοι:	XLR-3-31 x2, 1/4 "PHONE(TRS) x2
Έξοδοι:	Neutrik speakON NL4 x2, Binding post x2 pairs, 1/4" PHONE(TS) x2
Συνολική Αρμονική Παραμόρφωση (THD):	0.1% (1kHz, 10W), 0.3% (1kHz, Half power)
Eιδικά Στοιχεία:	-
Διαστάσεις (Π x Y x B):	48 x 8.8 x 38.8 εκ.
Rack Mount:	Ναι
Bάρος:	7,2 κιλά
Τύπος:	Low Impedance
Ισχύς 4Ω:	1000W-1500W
Rack Mount:	2U

 

Tελικός ενισχυτής 2x1200w/4Ω-2x1600w/2Ω/1x3200w/4Ω bridge. Νέα βελτιωμένη μονάδα DSP και οθόνη LCD. Η νέα σειρά XTI2 διαθέτει: Peak Plus Limiters-με ρύθμιση threshold/attack/release-Enchaced SubHarmonic Syntesizer. Ρύθμιση λειτουργίας FAN για πλήρη έλεγχο της ψύξης, νέος έλεγχος και monitoring μέσω software της τάσης λειτουργίας και της θερμοκρασίας του τροφοδοτικού. Χειρολαβές ενισχυμένου αλουμινίου, δυνατότητα κλειδώματος της παροχής τροφοδοσίας, βελτιωμένο software ελέγχου System Archtect και ΗιQnet Band Manager και 30 θέσεις μνήμης. Το DSP του ενισχυτή διαθέτει: Ιnput EQ 6 band parametric+Hi και Low passFilters-Crossover Highpass and Lowpass φίλτρα για κάθε κανάλι. Butterworth 6/12/18/24dB per octave. Linkwitz-Riley 24/48dB ανά Octave με ρύθμιση ±15dB bandpass gain και ρύθμιση φάσης. Output EQ 8 x παραμετρικά φίλτρα ανά κανάλι με ρύθμιση Q, ±15dB boost/cut. Delay μέχρι 50ms, ευαισθησία εισόδου 1.4v/ Bύσματα εισόδου XLR με Loop Thru. Speakon βύσματα, Θύρα USB. Διαστάσεις: βάθος 31εκ., ύψος 2U. Bάρος 8,4 kg.

Τελικός ενισχυτής 2x1000W/8Ω/2x1350W/4Ω-1000W/8Ω-1Χ2700W bridge 8Ω. Stereo/Parallel/Bridge mode.0.775-1.4v ευαισθησία. Είσοδοι XLR/RCA- Έξοδοι Speakon+Binding post. Ρυθμιστικά Level-gain-operation mode. Eνδεικτικά LED. Προστασία για Βραχυκύκλωμα-κενό φορτίο-καθυστέρηση έναρξης-αντιπαρασιτικό RF. 2RU Διαστάσεις ΥΠΒ 8.9Χ 48.1 Χ 38.6cm. Bάρος 18.7 κιλά. Crown XLI 3500 The Crown XLI 3500 is a reasonably priced, but robust and powerfull power amplifier. It suits ideally for the use in budget-oriented applications at mobile and stationary area. It offers a power of 2 x 1800 W / 4 Ohm. Thereby the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 3500 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it features three different, selectable modes (stereo, bridge and parallel). Crown XLI 3500:

• Reasonably priced, robust and powerfull power amplifier
• Robust and analog circuit
• LED display for each channel for signal, clip and error
• Stereo, bridge and parallel modes
• Conventional power supply
• Performance: 2 x 1200 W / 8 Ohm, 2 x 1800 W / 4 Ohm
• Inputs: Cinch, XLR
• Outputs: 2 x speakon, spring clip
• Robust 19 inch housing
• Hight: 2 hight units

Specifications

	XLi800	XLi1500	XLi2500	XLi3500
Channels	2	2	2	2
Sensitivity (full rated power at 8 ohms)	0.775V or 1.4V	0.775V or 1.4V	0.775V or 1.4V	0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted)	> 100 dB	> 100 dB	> 100 dB	> 100 dB
Total Harmonic Distortion (THD) (20Hz - 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB)	= /	= /	= /	= /
Frequency Response (at 1W, 20Hz - 20kHz)	0 dB, -1 dB	0 dB, -1 dB	0 dB, -1 dB	0 dB, -1 dB
Crosstalk (below rated power)	at 1kHz: -75 dB	at 1kHz: -75 dB	at 1kHz: -75 dB	at 1kHz: -75 dB
at 20kHz: - 59 dB	at 20kHz: - 59 dB	at 20kHz: - 59 dB	at 20kHz: - 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms)	> 200	> 200	> 200	> 200
AC Line Voltage and Frequency Configurations (± 10%)	120VAC 60Hz	120VAC 60Hz	120VAC 60Hz	120VAC 60Hz
220VAC 50/60Hz	220VAC 50/60Hz	220VAC 50/60Hz	220VAC 50/60Hz
230-240VAC 50/60Hz	230-240VAC 50/60Hz	230-240VAC 50/60Hz	230-240VAC 50/60Hz
Dimensions (H x W x D)	3.5" x 19" x 12.4“	3.5" x 19" x 12.4“	3.5" x 19" x 12.4“	3.5" x 19" x 14.4“
(89 x 482 x 315mm)	(89 x 482 x 315mm)	(89 x 482 x 315mm)	(89 x 482 x 366mm)
Net Weight	25.1 lb (11.4 kg)	28.0 lb (12.7 kg)	29.7 lb (13.5 kg)	43.0 lb (19.5 kg)
Net Shipping Weight	29.5 lb (13.4 kg)	32.4 lb (14.7 kg)	34.2 lb (15.5 kg)	47.4 lb (21.5 kg)

Solid DYNACORD technology for fixed installations at very competitive prices.
DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch.
The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.

Weight31.00 kg8.50 kg7.20 kg11.00 kg10.00 kg17.70 kgDimensionsΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔΜ/ΔAdditional information

Βάρος	31.00 kg

Βάρος	8.50 kg

Βάρος	7.20 kg

Βάρος	11.00 kg

Βάρος	10.00 kg

Βάρος	17.70 kg