| Content |
Advanced Feedback Suppression® Processor with Full LCD Display
Hear No Evil and See no Evil.
The AFS2 Advanced Feedback Suppression processor has been completely re-designed to take the foundation of the best selling AFS224 and bring it to thte next level. The AFS2 now offers the highly-intuitive Wizard function that takes all of the guesswork out of setting up any room. The AFS2 also incorporates a completely re-designed Advanced Feeback Supression module. Best of all, the AFS2 now provides the user with a full LCD display setup and monitoring.
With its powerful DSP module, the AFS2 provides all the processing and control necessary for both installation and live use. Ten and twelve filter feedback elimination processors are the de facto standard, but the AFS2 offers a dedicated feedback suppression processor that offers up to 24 filters per channel with filter Qs up to 1/80 of an octave. To achieve these staggering numbers dbx utilized their improved AFS technology that had previously only been available in the upper echelon line of products and made it available in this stand-alone processor. In addition to the plethora of feedback suppression filters available, the AFS2 also offers selectable modes, live filter lift, and types of filtration, which are all readily available via the intuitive user interface front panel. With all of these state-of-the-art features in place, not only do you hear no evil, but you will now be able to see no evil. ®
Features
- Wizard Setup Function
- Full LCD Display
- dbxʼs patented (Advanced Feedback Suppression) AFS™ technology
- 24 Programmable Filters per Channel
- Stereo or Dual Independent Channel Processing
- Live and Fixed Filter Modes
- Selectable Filter Lift Times
- Application-specific filter types include: Speech and Music Low, Med and High
- Input channel Metering
- 24 LED per Channel Filter Metering
- XLR and TRS Inputs and Outputs
Specifications |
Number of Inputs
|
2
| |
Input Connectors
|
Female XLR and 1/4” TRS
| |
Input Type
|
Electronically balanced/unbalanced, RF filtered
| |
Input Impedance
|
Balanced 50kΩ, Unbalanced 25kΩ
| |
Max input line level
|
+20 dBu
| |
CMRR
|
> 40dB, typically >55dB @ 1kHz
| |
Number of Outputs
|
2
| |
Output Connectors
|
Male XLR and 1/4” TRS
| |
Output Type
|
Electronically balanced/unbalanced, RF filtered
| |
Output Impedance
|
Balanced >120 Ω, Unbalanced >60 Ω
| |
Max Output Level
|
+20 dBu
| |
A/D Converter
|
dbx Type IV™ Conversion System
| |
A/D Dynamic Range
|
>113 dB A-weighted, >110 dB unweighted, 22kHz BW
| |
Type IV Dynamic Range
|
>119 dB, A-weighted, 22kHz BW; >117 dB, unweighted, 22kHz BW
| |
A/D Conversion
|
24-bit
| |
Sample Rate
|
48kHz
| |
D/A Dynamic Range
|
112 dB A-weighted, 109 dB unweighted
| |
D/A Conversion
|
24-bit
| |
Dynamic Range
|
109 dB A-weighted, 106 dB unweighted, 22kHz BW
| |
THD+Noise
|
0.003% typical at +4 dBu, 1 kHz
| |
Frequency Response
|
20Hz – 20kHz, +/- 0.5dB
| |
Interchannel Crosstalk
|
>80 dB typical
| |
Crosstalk input to output
|
>80 dB
| |
Operating Voltage
|
100-120VAC 50/60 Hz - EU: 220-240 VAC 50/60 Hz
| |
Power Consumption
|
9 W
| |
Unit Weight
|
4.5 lbs. (2.04 kg)
| |
Dimensions
|
1.75” (H) x 5.75” (D) x 19” (W), 4.4cm (H) x 14.6cm (D) x 48.26cm (W)
|
|
The ARX EC-2 is a flexible yet affordable 24 dB per octave Phase Correct active crossovers.
It has 2 modes of operation; as either Stereo 2 way or a Mono 3 way units, with a switch on
the back panel selecting either mode.
Features
Ultra low noise circuitry
Totally phase aligned at crossover point
Switchable Dual Channel 2 way or Single Channel 3 way
Unique 'semi-fixed' crossover point
24dB per octave (Fourth Order) Linkwitz-Riley filters
Separate Summed Mono Output
Balanced Inputs and Outputs
Built in High Pass filters
Intuitive, 'user friendly' layout
Flawless performance in any audio environment
Tamper-Proof Crossover Points
The crossover points are determined internally by the value of 4 resistors per channel; changing
the resistor value changes the crossover point. This 'semi fixed' method avoids the pitfalls of
externally adjusted crossover points, making the crossover points tamper-proof once they are set.
Idle fingers can't fiddle with the crossover points and create havoc with the system!
As a handy guide, a list of common crossover points and their corresponding resistor values are
printed inside the unit's lid, and also set out in the Owner's Manual.
On the front panel are level controls for Low and High in dual channel 2 way mode, and Low, Mid
and High in single channel 3 way mode, with corresponding Outputs on the rear panel.
Balanced Inputs and Outputs
EC-2 has Balanced Inputs and Outputs, on XLR connectors.
The EC-2 also has an additional summed Mono Low output, for applications that need a Mono Low
feed (e.g. Left and Right full-range plus a single Sub Bass speaker).
High Pass Filter
There is also a preset 30 Hz HighPass filter to remove unwanted subsonics which can damage speakers
and waste amplifier power.
In addition, each output has up to +6 dB of gain available, to compensate for amplifiers and speakers of
differing sensitivities.
Universal AC Power
AC power range is a universal 100 to 120V or 220 to 240VAC, and is connected to the unit via a standard
IEC connector, with built-in fuse and voltage change switch.
Uncompromising Audio Quality
Innovative circuit design is pointless unless it delivers stunning sound quality, and here the EC-2 excels.
It has been designed for uncompromising audio quality, and to achieve this, Linkwitz Riley 24dB (Fourth
Order) state variable filters are used throughout, ensuring a smooth Phase Correct transition through the
crossover region.
From Stage Monitors to Studio Monitors, from Front of House to the Front room of your House, the ARX
EC-2 is a crossover that is suited to any application that requires flawless, transparent sound.
You'll never compromise on Quality when you choose ARX
T E C H N I C A L S P E C I F I C A T I O N S
Input Impedance Balanced 20 Kohms, Unbalanced 10 Kohms
Input Headroom + 21 dB
CMRR >45 dB, 20 Hz-20 KHz
Output Impedance Balanced 300 ohms, Unbalanced 150 ohms
Output Level (Max) + 21dB
Frequency Response 30Hz-20KHz +or- 0.5dB
Note: 30 Hz is a function of the High Pass filter
Signal to Noise ratio (Controls at Unity) -90 dB Unweighted, -93 dB 'A' weighted
Distortion 004% THD,0dB,1KHz
Dynamic Range 111 dB
Power Requirements 100/120 V AC, 220/240 V AC
Weight 5 lbs/2.2 Kg
Dimensions 19“W x 13/4“H x 6“D, 482 x 44 x 155mm
Input Connector type XLR
Output Connector type XLR
Crossover point frequencies are changed internally by varying the value of 4 resistors
per channel.
Front Panel Controls
Low and High Output controls for 2 way mode
Low, Mid and High Output controls for 3 way mode
Marker panels for labelling crossover assigns
2 way/ 3 way status LEDs
Rear Panel
Balanced XLR Inputs and Outputs
Additional summed mono Low output
2 way / 3 way mode switch |
DBX ZONEPRO 1260
Ψηφιακός επεξεργαστής αναγγελιών 4 ζωνών. Διαθέτει 12 in/6 out. Διαθέτει agc (automatic gain leveler)
EQ, crossover, limiter, compressor, noise gate, parametric EQ, security lockout, AFS περιοριστή
μικροφωνισμών, RS 232 για έλεγχο και ρύθμιση μέσω PC, ethernet in & out. Δέχεται τα wall panel
dbx ZC. Ιδανικό για: ξενοδοχεία, εμπορικά κέντρα, καταστήματα, bar restaurants, cafe κτλ. δυνατότητα
να συνδεθεί και με άλλες ίδιες μονάδες και να επεκταθεί.
|
Μέσω του NLB 60E επιτυγχάνουμε την εποπτεία καθώς και τη λειτουργία των ενισχυτών C Series.
Παρέχεται η δυνατότητα σύνδεσης μέχρι και 60 ενισχυτές C Series
Με τη βοήθεια του υπολογιστή και του αντίστοιχου προγράμματος που παρέχεται από τη LAB GRUPPEN, αυτόματα αναγνωρίζεται το δίκτυο των ενισχυτών C Series και μπορούν να ελεγχθούν, όπως επίσης να πάρουμε πληροφορίες για τη λειτουργία των ενισχυτών.
2XRJ45 IN AND OUT Ethernet Connectors
Auto Sensing 100V-240V AC
2x Contact Closure GPI
1x Voltage Sense GPI
Διαστάσεις: Π: 48.3cm (19”), Y: 4.4cm (1U), B: 20,8cm (8,2”)
Βάρος: 2,25 kg
| Crossover 2-Way stereo or 3-way mono mode Additional subwoofer output Linkwitz-Riley filter with 24 dB / octave Sub-woofer frequency range separately adjustable Individual output gain controls and output mute switch for all bands 2 Balanced XLR inputs with gold-plated contacts 5 Balanced XLR outputs with gold-plated contacts Switchable 25 Hz low-cut filter to protect loudspeakers from infrasound Easy-to-read status LEDs Built-in power supply 100-240V, 50-60 Hz Dimensions (H x W x D): 44 x 483 x 147 mm Weight: 1.6 kg |
DBX ZONEPRO 640
Ψηφιακός επεξεργαστής αναγγελιών 4 ζωνών. Διαθέτει 6 in/4 out. Διαθέτει AGC
(automatic gain leveler) EQ, crossover, limiter, compressor, noise gate, parametric
EQ, security lockout, AFS περιοριστή μικροφωνισμών, RS 232 για έλεγχο και ρύθμιση
μέσω pc. Δέχεται τα wall panel dbx ZC. ιδανικό για: ξενοδοχεία, εμπορικά κέντρα,
καταστήματα, bar restaurants, cafe.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.