| Stock | Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
|
| Availability | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας |
| Content | 3" Speaker 20 W 8 Ohm Ferrite
Specifications
Product type
Loudspeaker Chassis
Pitch Circle Diameter
92 mm
Cut- out Measurement
73.6 mm
Diameter of fixing holes
6 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
20 W
Sensitivity (1 W / 1 m)
91 dB
Frequency response
100 - 20000 Hz
Voice Coil Material
Aluminum
Depth of the magnetic gap
4 mm
Fs (Resonance Frequency)
110 Hz
Re (DC resistance)
6.2 Ohm(s)
Qms (mechanical quality)
4.1
Le (inductance of the voice coil)
0.07 mH
Qes (electrical quality)
0.8
Qts (overall quality)
0.7
Vas (equivalent volume)
0.8
BL (power factor)
3.6 T/m
Xmax (maximum displacement)
1.83 mm
Cms (elasticity of the suspension)
0.87 mm/N
Sd (membrane area)
30.2 cm²
Rms (mechanical loss resistance)
0.4 kg/s
|
Weighing a mere 2 lbs., the Pro 5MRN neodymium midrange / tweeter driver features a wide usable frequency range and water resistant epoxy treated paper cone for a warm, rich tone. The truncated cast frame chassis allows for tight placement in your pro audio or car audio cabinet, and pair it with a Kappalite model for the ultimate in ultra-light bass guitar performance.
SPECIFICATION
- Nominal Basket Diameter: 5“, 127 mm
- Nominal Impedance*: 8 Ω
- Power Rating**
- Watts: 65 W
- Music Program: 130 W
- Resonance: 223 Hz
- Usable Frequency Range: 325 Hz - 20 kHz
- Sensitivity***: 93.1 dB
- Magnet Weight: 4 oz.
- Gap Height: 0.236“, 6 mm
- Voice Coil Diameter: 1“, 25 mm
THIELE & SMALL PARAMETERS
- Resonant Frequency (fs): 223 Hz
- DC Resistance (Re): 5.45 Ω
- Coil Inductance (Le): 0.18m H
- Mechanical Q (Qms): 2.8
- Electromagnetic Q (Qes): 0.93
- Total Q (Qts): 0.7
- Compliance Equivalent Volume (Vas): 0.85 liters / 0.03 cu.ft.
- Peak Diaphragm Displacement Volume (Vd): 3.6 cc
- Mechanical Compliance of Suspension (Cms): 0.12 mm/N
- BL Product (BL): 5.84 T-M
- Diaphragm Mass Inc. Airload (MMs): 4 grams
- Efficiency Bandwidth Product (EBP): 239
- Maximum Linear Excursion (Xmax): 0.51 mm
- Surface Area of Cone (Sd): 71.3 cm2
- Maximum Mechanical Limit (Xlim): 5.0 mm
MOUNTING INFORMATION
- Recommended Enclosure Volume
- Sealed: 0.85-1.56 liters / 0.03-0.06 cu.ft.
- Vented: - liters / - cu.ft.
- Driver Volume Displaced: 0.494 cu.ft. / 14 liters
- Overall Diameter: 5.25“, 133.4 mm
- Baffle Hole Diameter: 4.28“, 108.7 mm
- Front Sealing Gasket: Yes
- Rear Sealing Gasket: Yes
- Mounting Holes Diameter: 0.18“, 4.6mm
- Mounting Holes B.C.D.: 4.79“, 121.7mm
- Depth: 2.16“, 54.8 mm
- Net Weight: 2 lbs, 0.91 kg
- Shipping Weight: 2.2 lbs, 1 kgs
MATERIALS OF CONSTRUCTION
- Coil Construction: Pure aluminum voice coil
- Coil Former: Kapton former
- Magnet Composition: Neodymium magnet
- Core Details: Vented and Extended core
- Basket Materials: Die-cast aluminum basket
- Cone Composition: Treated paper cone
- Cone Edge Composition: Cloth cone edge
- Dust Cap Composition: Treated paper dust cap
| JBL Replacement Woofer for Control 23 Loudspeaker 124-03000-00
Replacement woofer for JBL's Control 23 Loudspeaker.
Voice coil:23mm (7/8“)
Nominal driver diameter: 86mm (3 3/8“)
Impedance: 8 ohms
DC Resistance: 6.5 ohms (nominal)
Polypropylene cone with rubber edge
| |
- 91 dB Sensitivity 1 W / 1 m
- 130 W Power Handling
- 1.5" Sandwich Voice Coil
- Double treated Cone for Water Protection
- Neodymium Magnet System
- Twin Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2- or 3-way Systems
| |
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.