| Stock | Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
| Διαθέσιμο κατόπιν παραγγελίας
|
| Availability | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας | Διαθέσιμο κατόπιν παραγγελίας |
| Content | 3" Speaker 20 W 8 Ohm Ferrite
Specifications
Product type
Loudspeaker Chassis
Pitch Circle Diameter
92 mm
Cut- out Measurement
73.6 mm
Diameter of fixing holes
6 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
20 W
Sensitivity (1 W / 1 m)
91 dB
Frequency response
100 - 20000 Hz
Voice Coil Material
Aluminum
Depth of the magnetic gap
4 mm
Fs (Resonance Frequency)
110 Hz
Re (DC resistance)
6.2 Ohm(s)
Qms (mechanical quality)
4.1
Le (inductance of the voice coil)
0.07 mH
Qes (electrical quality)
0.8
Qts (overall quality)
0.7
Vas (equivalent volume)
0.8
BL (power factor)
3.6 T/m
Xmax (maximum displacement)
1.83 mm
Cms (elasticity of the suspension)
0.87 mm/N
Sd (membrane area)
30.2 cm²
Rms (mechanical loss resistance)
0.4 kg/s
|
JBL Control 24 Series Driver Description: This (MPN 124-13000-00) is a replacement JBL Control 24 series coaxial driver.
This is a replacement JBL Control 24 series coaxial driver. It has a set of input spades for the LF part and a separate pair of wires exiting thru the back of the magnet to reach the voice coil of the HF unit. Compact and tough, a mighty reproducer in a small package. Remember, it does not include a crossover network. It is intended as a replacement for a blown unit in a JBL Control 24 series unit...you hobbiests will have to provide the external crossover that is already in the Control 24 mounting container. The opening for a front load is 3.5+" with the overall depth of 4" and 3.16" remaining under the baffle. It is a genuine replacement part and it is shipped to you sealed just the way we get it from JBL.
| |
LSR25P LF Driver Description:
This is the JBL low frequency driver (MPN 124-10002-00) for the LSR25P powered reference monitor. It is a genuine JBL replacement part sold to you sealed just the way we get it from JBL. The device is mounted in a frame which bolts into the front baffle of the speaker from the inside. You must dismantle the speaker to replace this driver. Order carefully, returns for your mistakes are not allowed.
| Faital Pro 5 FE 100 A
5" Speaker 80 W 8 Ohms
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
5 "
Nominal Diameter
130 mm
Voice Coil
1.26 "
Voice Coil
32 mm
Overall diameter
124.5 mm
Pitch Circle Diameter
133 mm
Cut- out Measurement
114 mm
Mounting holes
4
Diameter of fixing holes
6 mm
Depth
65 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
80 W
maximum rated load
160 W
Sensitivity (1 W / 1 m)
88 dB
Frequency response
65 - 6300 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
6 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
65 Hz
Re (DC resistance)
5.4 Ohm(s)
Qms (mechanical quality)
8.18
Le (inductance of the voice coil)
0.53 mH
Qes (electrical quality)
0.47
Qts (overall quality)
0.44
Vas (equivalent volume)
5.16
Mms (moving mass)
10.5 g
BL (power factor)
6.9 T/m
Xmax (maximum displacement)
5.25 mm
Cms (elasticity of the suspension)
0.55 mm/N
Sd (membrane area)
79.8 cm²
Rms (mechanical loss resistance)
0.57 kg/s
Weight
1,12 kg
|
- 91 dB sensitivity 1 W / 1 m
- 130 W + 60 W Power Handling
- 1.5" + 1.5“ Copper Voice Coil
- Single Point Source providing coherent Wave Front
- 90° conical Dispersion
- Optimal for compact 2-way Systems
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.