NEUTRIK NPPA-TT-PT ΠΕΔΙΟ ΒΥΣΜ. 1/8′ 2Χ48 ΘΕΣΕΩN Patchbay

Πεδίο βυσμάτων 1/8, 2 x 48 θέσεων, push terminals

2 x 48 TT (Bantam) jacks, half normalled bottom row, 288 push terminals, individual grounding

All NPPA patch panels are fitted with high quality, long life NJ3TTA gold plated double contact jacks (2x48), featuring best contact integrity. The unit, robustly housed in a black coated steel shell, is finished off with a built in cable bar and two large channel identification strips for perfect management of the system. The NPPA patch panels are an innovative and compact patching system (just 1U high) for 19" rack mounting.

• Innovative and compact patching system (just 1U high) for 19" rack mounting
• Robustly housed in a black coated steel shell
• High quality long life gold plated Neutrik prewired double jacks with best contact integrity
• Qualified for analog and digital signals acc. AES3, 48 kHz sampling frequency
• Mixed normalling configuration can be done by jack pairs (see accessories)
• Flexible grounding system (see Assembly Instruction)

Easy Patch` Patch Panel, 2 x 48 TT (Bantam) jacks, half normalled bottom row, 288 solder terminals for fixed installations - cost effective, including top and bottom cover

The PPB10 is a compact version of the well known and established PPB20 from Palmer. The PPB10 is a 10 channel audio splitter for press conferences and other applications. On a transformer split basis, one line input is split out to ten outputs.

• All inputs and outputs are balanced transformer isolated
• Extremely reliable: Should one output be shorted, the other outputs remain unaffected
• Line input and outputs
• Adjustable input gain (-∞ to +25dB)
• Level meter
• Headphone output to monitor the input level, headphone volume adjustable
• Individual ground lift switches for each output
• Ground Lift switch for the input
• Expandable setup thanks to the Bus In/Out sockets - allowing you to cascade numerous PPB10 (or PPB20)

Patch panel 2x48TT (Bandam) jacks, 12x25 pole D-sub

• Patch Points: 48 (2 rows of 24)
• Jacks: 1/4 inch phone, balanced or unbalanced, nickel-silver, self-cleaning contacts
• Normalling: Half-normalled or de-normalled (user configurable)
• Chassis Dimensions (H x W x D): 1.75 x 19 x 2.6 inches (44mm x 482mm x 68mm)
• Module Dimensions (H x W x D): 1.4 x 0.6 x 2.6 inches (40mm x 18mm x 68mm)
• Shipping Weight: 2.3 lb (1.1 kg)

The Press Patch Box is a special kind of audio signal distributor intended for use at press conferences. It features separate inputs for microphone and line signals (from a mixing console output).

Also available as stereo version (PPB20S)

A high quality input amplifier with a transformer balanced input provides a wide dynamic range. A total of 20 transformer-balanced XLR/m outputs with separate paired driver circuits make it possible to connect up video cameras and other recording equipment.

The nominal output level is +4 dBu at 600 Ω. Channels 19 and 20 have TRS jack sockets for balanced/unbalanced signals and also phono sockets (-10 dBu nominal level).

Where more than 20 outputs are required, additional PPB 20s can be hooked up via a rear BUS IN/OUT socket. Signal monitoring is provided by a 10 LED strip displaying a range of -40 to +10 dB (0 dB in the display = 4 dBu output) and an adjustable headphones amplifier.

The PPB20 has an integral, shielded power supply unit. An extra DC input makes it possible to connect up a (backup) battery power source. A PW4 can provide the necessary backup power supply for two PPB20s.

Input:

• Transformer-balanced, 4 XLR/f sockets, with paired front/rear parallel connections for separate microphone/line signals.
• Nominal Input Impedances: Microphones 200 Ω, Line = 5 kΩ
• Max. input levels: microphones = 0 dBu, Line = +20 dBu
• Max. amplification: microphones = +66 dB, Line = +22 dB (constantly adjustable via switch and potentiometer).

Output:

• 20 XLR/m, 2x TRS jack, 2x phono, all transformer-balanced and floating with separate ground lift switches at rear
• Nominal output impedances: XLR = 300 Ω, jack and phono = 600 Ω
• Nominal output levels: XLR = +4 dBu/20 dBu max.; jack/phono = -10 dBu, + 6 dBu max
• Headphones output: Stereo jack socket, with mono tip + ring, Designed for use with 8 Ω - 200 Ω headphones (constantly adjustable level).
• 10 LED strips displaying a range of -40 to +10 dB.
• Bus input/output (mono jack)
• Power Supply: 230 VAC or ± 12 V to ± 18 VDC, 15 Watts.
• Housing: 19'', 3 U, approx. 200 mm deep.