| Content |
- Reactive attenuator and load box
- Finely-tuned analogue speaker simulator
- Speaker output with unique tone control
- Microphone / line input (blendable with speaker simulator)
- Front panel headphone output
- Stereo FX loop
- Front panel aux input
- Balanced stereo XLR Line Outputs
- Compatible with 8 and 16-ohm setups
- Rated for tube amps up to 150 Watts
- Amp protection circuit with permanent amp load
- All analogue experience; no app required!
General
Product type
attenuator, DI box, Headphone Amp:, load box, Microphone preamplifier, power soak, Re-amping device analogue, speaker simulator
Front panel controls
7-Step Speaker Attenuation, Aux In Level, Hard/Soft Tone Selector, Line EQ (5 Voicings), Line Out Blend, Line Out Level, Mic Gain, MIC Tone, Phone Level, Pre/Post Switch (Amp to Line Out), Speaker Tone (5 Voicings)
Rear panel controls
Amp Load Impedance Switch, FX Level (Pro/Instrument), FX Loop Line Out, FX Loop Re-Amp, GND/Lift, MIC/LINE Input PAD, Phantom Power, Polarity
Input type
Balanced, Unbalanced
Input connectors
3.5 mm jack, 6.3 mm jack, XLR
Output type
Balanced, Unbalanced
Output connectors
3.5 mm jack, 6.3 mm jack, XLR
Transformer isolated outputs
Yes
Internal load impedance
16 ohms, 8 ohms
Minimal load in OFF status
16 ohms
Voicing filter
5-step Speaker Tone and 5-step Line EQ
Indicators
bypass, Full attenuation, input level, MIC-Signal/Clip, Output level, power soak, thermal overload
Power supply
+ 9 V DC barrel jack - 1.5 A
Power supply polarity
Center negative
Power connector
2 x 5.5mm
Maximum power consumption
13.5 W
Standby power consumption
0.3 W
Dimensions (W x H x D)
334 x 108 x 274 mm
Ambient temperature (in operation)
- 20°C - 25 °C
Relative Humidity
< 80 % ( non-condensing )
Accessories (included)
Power supply
Audio inputs
AUX IN max. input level (< 1% THD, 1kHz)
+ 9 dBV
AMP IN max. input power
150 W Peak, 100 W RMS
Audio outputs
LINE OUT max. output level (<1% THD)
+ 18 dBu
RE-AMP max. output level (<1% THD)
+ 1.5 dBv
PHONES OUT max. output level (<1% THD, 1kHz)
1.4 V RMS
PHONES OUT min. impedance
33 Ohm
MIC / LINE Input
MIC / LINE IN low cut frequency (-3dB)
90 Hz
MIC / LINE IN Gain range
0 - 25 dB
MIC IN (XLR) max. input level (< 1% THD, 1kHz)
+ 1 dBu
LINE IN (TRS) max. input level (< 1% THD, 1kHz)
+ 22 dBu
MIC IN to LINE OUT THD+N (1kHz, +4dBu)
< 0.006 %
MIC IN to LINE OUT THD+N (20Hz-20kHz, +4dBu)
< 0,04 %
MIC IN to LINE OUT EIN (max. gain, unweighted)
- 114 dBu
MIC IN to LINE OUT SNR (all bypass)
105 dB
MIC/LINE IN PAD attenuation
20 dB
MIC IN (XLR) input impedance (balanced)
1500 Ohm(s)
LINE IN (TRS) input impedance (balanced)
24000 Ohm(s)
| Το απόλυτο και ευέλικτο ROCK / METAL "εργαλείο" χωρίς κανένα συμβιβασμό! Με 4 κανάλια έτοιμα να οδηγήσουν τον ήχο σε μονοπάτια που κανείς δεν έχει πάει έως τώρα. Με δυνατότητα επεξεργασίας από πεντακάθαρο και "σφιχτό" ήχο σε εντονότερες εντάσεις γεμάτες όγκο έτσι ώστε να ικανοποιήσει τις ανάγκες ακόμη και του πιο απαιτητικού και σύγχρονου κιθαρίστα. Πλούσιες αρμονικές και επιθετικότητα που παραδίδονται από ειδικά δομημένους μετασχηματιστές για τις ανάγκες του studio recording ή live εμφανίσεων.
Χαρακτηριστικά:
- 4 κανάλια
- 2 Bottom sound switches (one for Lead-Channel 3 and another one for Lead-Channel 4)
- Master A and B controls for different output volume settings
- Presence and Depth Punch controls in the poweramp stage
- Noise Gate (including threshold control) can now be activated via footswitch (On/Off)
- Bright and Bottom sound switches for Clean and Crunch
- F.X. Loop Send & Return with Balance control now switchable via footswitch (On/Off)
- Λυχνίες: 4 x ECC83 (12AX7) preamp, 4 x 6L6GC power amp
- Έξοδος για καμπίνα: 2?4, 2x 8, 1x 16 Ohms
|
Ενισχυτής κιθάρας HEAD Classic Plus 50 Watt, διαθέτει προενίσχυση με 4 λυχνίες 12AX7/ECC83 & έξοδο με 2 λυχνίες EL34B, 2 ανεξάρτητα κανάλια με reverb & FX-loop ελεγχόμενα από ποδοδιακόπτη, master volume, έξοδος balanced XLR και unbalanced 1/4" DI output.
Technical Info Power Output: 50 watts RMS into selectable 8 or 16-ohm loudspeaker load
Valve Complement: 4 x 12AX7/ECC83 (V1:Low microphonic) and 2 x EL34B
Dimensions (W x H x D): 702 x 265 x 285 mm / 27.6 x 10.4 x 11.2 in.
Weight: 22 kg / 48.5 lbs.
|
The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.
Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.
- Product type: Amplifier
- Type: 2-channel
- Output power (1 kHz 4 ohms): 2 x 200 W
- Output power (1 kHz 8 ohms): 2 x 100 W
- Output power (1 kHz 8 ohms, bridged mode): 400 W
- Circuit concept: Class D dynamic
- Frequency response: 20 - 20,000 Hz
- THD:
- Voltage gain: 32 dB / 26 dB / 28 dB
- Input sensitivity: 0.68 V / 1.4 V / 1.2 V
- Protection: Soft-start, short-circuit, DC, overheating, overvoltage
- Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
- Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
- Line input connectors: 2 x XLR, 2 x 6.3 mm jack
- Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
- Cooling System: low-noise fan
- Power supply: switching power supply
- Power Consumption Full Load: 470 W
- Operating voltage: 115 V AC / 230 V AC (switchable)
- Width: 482 mm
- Height: 44 mm
- Depth: 244 mm
|
Ενισχυτής κιθάρας JTM45 HEAD (reissue) 30W, με 3xECC83 Pre-Amp tubes και 2x5881 Power AMP tubes), σειριακή FX λούπα με διακόπτη Τrue Βypass.
Marshall 2245-01 30W Guitar Amplifier
When Jim Marshall first started manufacturing Marshall amps, back in 1962, the first amp out of the workshop was the JTM45. This amp instantly became a hit and launched a whole new generation of amazing guitar players. Since then, connoisseurs of tone have searched high and low for original examples of this beautiful amp. Now they need search no more, Marshall has re-issued the JTM45 complete with its full quota of glassy clean tone and fluid warm sustain.
By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45s glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smoulder beneath every note you play.
| Model Name | JTM45 (2245) | | Series | Vintage Reissue | | Tubes | 3 ECC83 (Preamp), 2 5881 (Power Amp) | | Output | 30 Watts | | OHMS | 16 | | Speakers | n/a | | Effects | n/a | | Covering | Black Vinyl | | Footswitch | n/a | | Dimensions | 660x260x205mm | | Weight | 14.6kg |
|
Ενισχυτής κιθάρας HEAD 50W, 3 καναλιών (Clean, Crunch, Overdrive) με 3 διαφορετικές λειτουργίες σε κάθε κανάλι, με 4xECC83 Pre-Amp tubes, 1xECC83 και 2xEL34 Power AMP tubes. Δύο FX loops, διπλό master volume & midi switching. Συνοδεύεται από ποδοδιακόπτη ελέγχου καναλιών και FX loop.
Technical Info
Output (RMS): 50 Watts
Speakers: No
Pre-amp Valves: 4 x ECC83
Power Amp Valves: 1 x ECC83, 2 x EL34
Footswitch (Supplied): PEDL-00045
Dimensions (Millimeters): 730 x 310 x 215
Weight: 17.5 kg, 38.6 lbs
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.