| Content |
- Reactive attenuator and load box
- Finely-tuned analogue speaker simulator
- Speaker output with unique tone control
- Microphone / line input (blendable with speaker simulator)
- Front panel headphone output
- Stereo FX loop
- Front panel aux input
- Balanced stereo XLR Line Outputs
- Compatible with 8 and 16-ohm setups
- Rated for tube amps up to 150 Watts
- Amp protection circuit with permanent amp load
- All analogue experience; no app required!
General
Product type
attenuator, DI box, Headphone Amp:, load box, Microphone preamplifier, power soak, Re-amping device analogue, speaker simulator
Front panel controls
7-Step Speaker Attenuation, Aux In Level, Hard/Soft Tone Selector, Line EQ (5 Voicings), Line Out Blend, Line Out Level, Mic Gain, MIC Tone, Phone Level, Pre/Post Switch (Amp to Line Out), Speaker Tone (5 Voicings)
Rear panel controls
Amp Load Impedance Switch, FX Level (Pro/Instrument), FX Loop Line Out, FX Loop Re-Amp, GND/Lift, MIC/LINE Input PAD, Phantom Power, Polarity
Input type
Balanced, Unbalanced
Input connectors
3.5 mm jack, 6.3 mm jack, XLR
Output type
Balanced, Unbalanced
Output connectors
3.5 mm jack, 6.3 mm jack, XLR
Transformer isolated outputs
Yes
Internal load impedance
16 ohms, 8 ohms
Minimal load in OFF status
16 ohms
Voicing filter
5-step Speaker Tone and 5-step Line EQ
Indicators
bypass, Full attenuation, input level, MIC-Signal/Clip, Output level, power soak, thermal overload
Power supply
+ 9 V DC barrel jack - 1.5 A
Power supply polarity
Center negative
Power connector
2 x 5.5mm
Maximum power consumption
13.5 W
Standby power consumption
0.3 W
Dimensions (W x H x D)
334 x 108 x 274 mm
Ambient temperature (in operation)
- 20°C - 25 °C
Relative Humidity
< 80 % ( non-condensing )
Accessories (included)
Power supply
Audio inputs
AUX IN max. input level (< 1% THD, 1kHz)
+ 9 dBV
AMP IN max. input power
150 W Peak, 100 W RMS
Audio outputs
LINE OUT max. output level (<1% THD)
+ 18 dBu
RE-AMP max. output level (<1% THD)
+ 1.5 dBv
PHONES OUT max. output level (<1% THD, 1kHz)
1.4 V RMS
PHONES OUT min. impedance
33 Ohm
MIC / LINE Input
MIC / LINE IN low cut frequency (-3dB)
90 Hz
MIC / LINE IN Gain range
0 - 25 dB
MIC IN (XLR) max. input level (< 1% THD, 1kHz)
+ 1 dBu
LINE IN (TRS) max. input level (< 1% THD, 1kHz)
+ 22 dBu
MIC IN to LINE OUT THD+N (1kHz, +4dBu)
< 0.006 %
MIC IN to LINE OUT THD+N (20Hz-20kHz, +4dBu)
< 0,04 %
MIC IN to LINE OUT EIN (max. gain, unweighted)
- 114 dBu
MIC IN to LINE OUT SNR (all bypass)
105 dB
MIC/LINE IN PAD attenuation
20 dB
MIC IN (XLR) input impedance (balanced)
1500 Ohm(s)
LINE IN (TRS) input impedance (balanced)
24000 Ohm(s)
|
Ενισχυτής κιθάρας HEAD 100W, 3 καναλιών (Clean, Crunch, Overdrive) με 3 διαφορετικές λειτουργίες σε κάθε κανάλι, με 4xECC83 Pre-Amp tubes, 1xECC83 και 4xEL34 Power AMP tubes. Δύο FX loops, διπλό master volume & midi switching. Συνοδεύεται από ποδοδιακόπτη ελέγχου καναλιών και FX loop.
|
Μικρή κεφαλή ηλεκτρικής κιθάρας με λυχνίες, Normal / Top Boost channel select, Thin / Mellow έλεγχος χροιάς, Gain και Volume control, 8Ω / 16Ω speaker out επιλογή, μεταλλική κατασκευή
Ισχύς:
| 5W | | Κανάλια: | 1 | | Equalizer: | - | | Είσοδοι: | 1 | | Έξοδοι: | 2 | | Εφέ: | - | | Λυχνίες: | Ναι | | Ποδοδιακόπτης: | - | | Ρυθμιστικά: | Thin, Mellow, Gain, Volume | | FX Loop: | - | | Διαστάσεις ( Π x Y x B ): | -
120mm (d) x 193mm (w) x 105mm (h)
| | Βάρος: | -
2,55kg
|
|
Κεφαλή ενισχυτής κιθάρας 120W που οδηγείται από τέσσερις λυχνίες EL84, δύο καναλιών (Clean/Crunch, Lead) με 6 λυχνίες προενίσχυσης 12AX7 με ανεξάρτητο equalizer (Bass, Mid & Treble ) για κάθε κανάλι . Εφοδιασμένος με υψηλής ποιότητας reverb ανά κανάλι. Επιλογή αντίστασης μεγαφώνου καμπίνας (4,8,16 Ω).
Ultimate Rock Tone 120-Watt 2-Channel Tube Amplifier Head with Reverb and INFINIUM Tube Life Multiplier
- Hand-built 120-Watt amplifier driven by 4 x 6L6 tubes (convertible to EL34)
- 2-channel preamp design (Clean/Crunch, Lead) featuring 6 x 12AX7 tubes for thick and screaming hi-gain
- Revolutionary INFINIUM Tube Life Multiplier technology:
- Extends the life of your amplifierʼs expensive power tubes up to 20 times
- Provides incredible reliability and consistent tone over the complete lifespan of your tubes
- No need for expensive matched tube sets
- Allows you to mix and match any combination of compatible tube types and brands
- Monitors performance of each power tube continuously and displays defective tubes to allow for easy and individual replacement
- Integrated high-class reverb with dedicated Reverb control for each channel
- Independent Equalizer sections for each channel with dedicated Bass, Mid and Treble controls
- Classic Presence control per channel for efficient midrange sound shaping
- Heavy-duty footswitch for Channel selection and FX Loop function included
- Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
|
Handwired επανέκδοση του μοντέλου 2061 Head στα 20W που κυκλοφόρησε από το 1968 έως το 1973. 2 λάμπες ECC83 στην προενίσχυση, 1 ζεύγος EL84 στο τελικό στάδιο. |
Ενισχυτής κιθάρας HEAD Classic Plus 50 Watt, διαθέτει προενίσχυση με 4 λυχνίες 12AX7/ECC83 & έξοδο με 2 λυχνίες EL34B, 2 ανεξάρτητα κανάλια με reverb & FX-loop ελεγχόμενα από ποδοδιακόπτη, master volume, έξοδος balanced XLR και unbalanced 1/4" DI output.
Technical Info Power Output: 50 watts RMS into selectable 8 or 16-ohm loudspeaker load
Valve Complement: 4 x 12AX7/ECC83 (V1:Low microphonic) and 2 x EL34B
Dimensions (W x H x D): 702 x 265 x 285 mm / 27.6 x 10.4 x 11.2 in.
Weight: 22 kg / 48.5 lbs.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.