| Content |
- Reactive attenuator and load box
- Finely-tuned analogue speaker simulator
- Speaker output with unique tone control
- Microphone / line input (blendable with speaker simulator)
- Front panel headphone output
- Stereo FX loop
- Front panel aux input
- Balanced stereo XLR Line Outputs
- Compatible with 8 and 16-ohm setups
- Rated for tube amps up to 150 Watts
- Amp protection circuit with permanent amp load
- All analogue experience; no app required!
General
Product type
attenuator, DI box, Headphone Amp:, load box, Microphone preamplifier, power soak, Re-amping device analogue, speaker simulator
Front panel controls
7-Step Speaker Attenuation, Aux In Level, Hard/Soft Tone Selector, Line EQ (5 Voicings), Line Out Blend, Line Out Level, Mic Gain, MIC Tone, Phone Level, Pre/Post Switch (Amp to Line Out), Speaker Tone (5 Voicings)
Rear panel controls
Amp Load Impedance Switch, FX Level (Pro/Instrument), FX Loop Line Out, FX Loop Re-Amp, GND/Lift, MIC/LINE Input PAD, Phantom Power, Polarity
Input type
Balanced, Unbalanced
Input connectors
3.5 mm jack, 6.3 mm jack, XLR
Output type
Balanced, Unbalanced
Output connectors
3.5 mm jack, 6.3 mm jack, XLR
Transformer isolated outputs
Yes
Internal load impedance
16 ohms, 8 ohms
Minimal load in OFF status
16 ohms
Voicing filter
5-step Speaker Tone and 5-step Line EQ
Indicators
bypass, Full attenuation, input level, MIC-Signal/Clip, Output level, power soak, thermal overload
Power supply
+ 9 V DC barrel jack - 1.5 A
Power supply polarity
Center negative
Power connector
2 x 5.5mm
Maximum power consumption
13.5 W
Standby power consumption
0.3 W
Dimensions (W x H x D)
334 x 108 x 274 mm
Ambient temperature (in operation)
- 20°C - 25 °C
Relative Humidity
< 80 % ( non-condensing )
Accessories (included)
Power supply
Audio inputs
AUX IN max. input level (< 1% THD, 1kHz)
+ 9 dBV
AMP IN max. input power
150 W Peak, 100 W RMS
Audio outputs
LINE OUT max. output level (<1% THD)
+ 18 dBu
RE-AMP max. output level (<1% THD)
+ 1.5 dBv
PHONES OUT max. output level (<1% THD, 1kHz)
1.4 V RMS
PHONES OUT min. impedance
33 Ohm
MIC / LINE Input
MIC / LINE IN low cut frequency (-3dB)
90 Hz
MIC / LINE IN Gain range
0 - 25 dB
MIC IN (XLR) max. input level (< 1% THD, 1kHz)
+ 1 dBu
LINE IN (TRS) max. input level (< 1% THD, 1kHz)
+ 22 dBu
MIC IN to LINE OUT THD+N (1kHz, +4dBu)
< 0.006 %
MIC IN to LINE OUT THD+N (20Hz-20kHz, +4dBu)
< 0,04 %
MIC IN to LINE OUT EIN (max. gain, unweighted)
- 114 dBu
MIC IN to LINE OUT SNR (all bypass)
105 dB
MIC/LINE IN PAD attenuation
20 dB
MIC IN (XLR) input impedance (balanced)
1500 Ohm(s)
LINE IN (TRS) input impedance (balanced)
24000 Ohm(s)
|
Ενισχυτής κιθάρας JTM45 HEAD (reissue) 30W, με 3xECC83 Pre-Amp tubes και 2x5881 Power AMP tubes), σειριακή FX λούπα με διακόπτη Τrue Βypass.
Marshall 2245-01 30W Guitar Amplifier
When Jim Marshall first started manufacturing Marshall amps, back in 1962, the first amp out of the workshop was the JTM45. This amp instantly became a hit and launched a whole new generation of amazing guitar players. Since then, connoisseurs of tone have searched high and low for original examples of this beautiful amp. Now they need search no more, Marshall has re-issued the JTM45 complete with its full quota of glassy clean tone and fluid warm sustain.
By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45s glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smoulder beneath every note you play.
| Model Name | JTM45 (2245) | | Series | Vintage Reissue | | Tubes | 3 ECC83 (Preamp), 2 5881 (Power Amp) | | Output | 30 Watts | | OHMS | 16 | | Speakers | n/a | | Effects | n/a | | Covering | Black Vinyl | | Footswitch | n/a | | Dimensions | 660x260x205mm | | Weight | 14.6kg |
|
BUGERA captures the stunning sound of the 1960s with the V55, a combo whose modern touches put a wide palette of vintage tones at your fingertips. With a proud pair of 6L6 power tubes in the output stage, the V55 bathes your guitar in clean California sunshine.
Its 2-channel preamp takes you everywhere from warm blues to garage-shattering crunch. A heavy-duty footswitch (included) lets you switch between channels remotely. Choose triode mode for an urgent, aggressive tonal edge, or pentode mode for clean and loud sound. A dose of built-in reverb provides the finishing touch. V55's Impedance switch (4, 8 and 16 ohms) makes it compatible with virtually any speaker cabinet. A custom-designed, handmade 12" BUGERA speaker brings this amp's vintage voice home in style.
Also available in a head version, the V55HD is ideally suited for use with the 212V-BK speaker cabinet.
Rock on with the way-out sound of yesterday - the BUGERA V55.
Features- Hand-built 55-Watt guitar head driven by 2 x 6L6 tubes
- Way cool vintage look and feel
- Authentic 2-channel preamp design from the '60s featuring 3 x 12AX7 tubes-everything from purring blues to mind-blowing crunch
- Integrated high-class reverb with dedicated Reverb control
- Vintage Equalizer section with dedicated Bass, Mid, Treble and Presence controls
- Normal and Bright inputs for ultimate sound character to perfectly match your guitar
- Multi-gain stage Lead channel with Pre Gain, Post Gain and Master controls
- Amazing Mode switch to select between Triode or Pentode operation
- Heavy-duty footswitch for Channel and Reverb function included
- Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
- High-quality components and exceptionally rugged construction ensure long life
|
Δικάναλη κεφαλή με λυχνίες στα 30 Watts. Καθαρό κανάλι με απίστευτη διαύγεια και πεντακάθαρο λαμπερό ήχο, σε όλο το φάσμα των αρμονικών συχνοτήτων και σε οποιαδήποτε ένταση. Το δεύτερο (dirty) κανάλι διαθέτει το shape control ποτενσιόμετρο, το οποίο όχι μόνο είναι το πιο εύχρηστο ως προς την διαμόρφωση του ήχου, αλλά κάνει τον χαρακτηριστικό αυτόν ήχο της Orange που κυριολεκτικά ισοπεδώνει στις μεσαίες συχνότητες.
Μία απο τις πιο διαδεδομένες κεφαλές της Orange και όχι άδικα, αφού ο ήχος της είναι μοναδικός. Το τελικό αποτέλεσμα του ήχου που διαμορφώνεται με την τετράδα των λυχνιών EL84 που διαθέτει, μπορεί να χαρακτηριστεί το λιγότερο εντυπωσιακό. Το ξέσπασμα των λυχνιών καθώς οδηγούνται στο όριο του overdrive γίνεται αξεπέραστο. Δυνατότητα προσαρμογής του ενισχυτή με κλιμάκωση από 30, 15 ή 7 Watts αναλόγως των συνθηκών.
Χαρακτηριστικά :
- Ισχύς : 30, 15 ή 7 Watts
- Shape control, Dirty volume
- Δύο κανάλια
- 2 Band EQ (bass, treble) και gain control
- Foot switchable
- Power amp: 4 XEL84
- Preamp: 4 X ECC83/12AX7
- FX Loop: 1 X ECC81/12AT7
Διαστάσεις : 55 X 27 X 24 εκατοστά
Βάρος: 15.55 κιλά
|
Ενισχυτής κιθάρας HEAD 100W, 3 καναλιών (Clean, Crunch, Overdrive) με 3 διαφορετικές λειτουργίες σε κάθε κανάλι, με 4xECC83 Pre-Amp tubes, 1xECC83 και 4xEL34 Power AMP tubes. Δύο FX loops, διπλό master volume & midi switching. Συνοδεύεται από ποδοδιακόπτη ελέγχου καναλιών και FX loop.
|
Marshall 2203-01 100W Guitar Amplifier
The all-valve JCM800 2203 is one of the most highly respected 100 Watt
Marshall heads in the company's long history.Evolving from the legendary
100 Watt 'Plexi' head,it was one of our first amplifiers to feature a Master
Volume(MV) Control.
The very essence of simplicity,the JCM800 2203 is a one channel,all-valve
amp with no reverb or built-in effects.Its foolproof interface,distinctive roar
and larger-than-life 'edge' immediately set the standard by which all other
rock amps were judged and it remained the 'industry benchmark' throughout
the entire 16 years of its production life.Now it's back by popular demand and
as with the 1959SLP and 1987X we've added a Series Effects Loop featuring
a true bypass switch that takes the loop completely out of the circuit,thus
ensuring the original tone isn't compromised in any shape or form.
|
Αξιολογήσεις
Δεν υπάρχει καμία αξιολόγηση ακόμη.