TC ELECTRONIC M-3000 STUDIO REVERB PROCESSOR

Η τεχνολογία VSS3-reverb που έχει ενσωματωθεί στο Μ3000 αποτελεί πλέον μέτρο σύγκρισης στη μουσική βιομηχανία. Το Μ3000 περιλαμβάνει μερικά από τα πιο εύχρηστα, ποιοτικά και ευέλικτα reverbs για μουσική και ταινίες στην αγορά. Συνδυάζοντας τον απόλυτο έλεγχο στα early reflections με τη διαφάνεια και τις τέλειες αρμονικές στον ήχο του βάθους, η τέχνη του reverberation ανεβαίνει σε νέα επίπεδα.
Με διπλή μηχανή που επιτρέπει στη ταυτόχρονη χρήση 2 reverbs ή εφέ, βραβευμένο user interface, 600 factory presets και πολλαπλές εισόδους και εξόδους, το Μ3000 είναι μια από τις καλύτερες επιλογές για επαγγελματικού επιπέδου reverb.

Technical Specification  
 Digital Inputs and Outputs 
Connectors  XLR (AES/EBU)
RCA Phono (S/PDIF)
Optical (Toslink, ADAT)
Formats  AES/EBU (24 bit), S/PDIF (24 bit), EIAJ CP-340, IEC 958,
EIAJ Optical (Toslink), ADAT Lite pipe
Output Dither  HPF TPDF dither 8-24 bit
Word Clock Input  RCA Phono, 75 ohm, 0.6 to 10 Vpp
Sample Rates  44.1 kHz, 48 kHz
Processing Delay  0.2 ms @ 48 kHz
Frequency Response DIO  20 Hz to 23,9 kHz +0,01/-0,1 dB @ 48 kHz
 Analog Inputs 
Connectors  XLR balanced (pin 2 hot)
Impedance  20 kohm
Max. Input Level  +22 dBu (balanced)
Min. Input Level (for 0 dBFS)  -10 dBu
Sensitivity  @ 12 dB headroom: -22 dBu to +10 dBu
A to D Conversion  24 bit (1 bit, 128 times oversampling
A to D Delay  0.8 ms @ 48 kHz
Dynamic Range  >103 dB (Unweighted), >106 dB (A)
THD  -95 dB (0,0018 %) @ 1kHz
-6 dBFS (FS @ +16 dBu)
Frequency Response  10 Hz to 20 kHz: +0/-0.2 dB
Crosstalk  100 dB (unweighted), >104 dB(A)
THD  -86 dB (0.005%) @ 1 kHz
-6 dBFS (FS @ +16 dBu)
Frequency Response  10 Hz to 20 kHz: +0/-0.5 dB
Crosstalk 

Features
Unique High Density design puts SIX gates in
minimum rack space
Intuitive, 'user friendly' layout
Balanced Inputs and Outputs
Fast, low noise opto-coupler circuitry
Sidechain/Key Input points on each channel
Hardwire Bypass switch on each gate
Flawless performance in any audio environment

The sheer amount of effects and signal processors required for today's
standards of audio production puts a great strain on the available space
in equipment racks, both in the studio and on the road.
So, in order to give engineers more control in less space, we've created
the ARX Sixgate; Six full function noise gates neatly housed in a compact,
all steel 1 RU package, without sacrificing features or quality.
Why Six gates?
Research shows that the majority of noise gates get used on drum kits,
which means using typically 5 to 6 gate channels. Compare this to the
two or maybe 4 channels that most other units have, and you'll see the
reason for the Sixgate's success.And, by using a minimalist approach to
drum gates, the ARX Sixgate has enough gates left over for backing vocals
and other instruments.
Industry Standard controls
Front panel controls for each gate consist of the 'Industry Standard' controls
for Release, Depth and Threshold, plus Red and Green LED displays to indicate
Gate Open or Closed status, and an IN/OUT hardwire bypass switch.
In addition to this, each gate has a blank panel to write on for easy confirmation
of gate assigns. No more pieces of masking tape stuck everywhere!
Ultra Low Noise
Internally, each gate has proprietary ARX ultra low noise high-speed opto-coupler
circuitry with program dependent Attack time, which tracks the incoming signal to
automatically determine optimum gate response.
Balanced Inputs and Outputs
The rear panel features true differential Balanced Inputs and Outputs for each gate,
on insulated TRS jack connectors.Each gate channel also has Individual Key Inputs/
Sidechain access insert points which can be used either for gate control by an external
signal, or for frequency sensitive gating (when used in conjuction with an external
equalizer such as the ARX EQ260).
Universal AC Power
AC power range on the Sixgate is a universal 100 to 120V or 220 to 240V, and is
connected to the unit via a standard 3 pin IEC connector, with built-in fuse and voltage
switch.
The Sixgate's unique combination of High Density design, intuitive 'user friendly' controls,
and clean uncluttered layout make it a truly useful audio tool for all applications.

T E C H N I C A L  S P E C I F I C A T I O N S
Input Impedance
Balanced 20 Kohms, Unbalanced 10 Kohms
Input Headroom + 22 dB
CMRR >60 dB, 20 Hz-20 KHz
Output Impedance
Balanced 300 ohms, Unbalanced 150 ohms
Output Level (Max) + 20 dB
Frequency Response 20Hz to 20KHz ±0.2dB
Signal to Noise Ratio
Gate Closed: -95 dB Unweighted, -105 dB 'A' weighted
Gate Open, Depth Minimum: -93.5 dB Unweighted -98dB
'A' weighted
Distortion 0 .01% THD @ 0dB,1KHz
Dynamic Range 125 dB
Attack Time Program dependent using high-speed
opto-couplers
Release Time User variable
Input and Output Connector type Balanced Jack
Sidechain Insert Connector TipRingSleeve Jack
Sidechain Insert Impedance 10 Kohm
Power Requirements 100/120 V AC, 220/240 V AC
Weight 5 lbs/2.2 Kg
Dimensions
19“Wide x 13/4“High x 6“Deep; 482 x 44 x 155mm

Front Panel Controls
Individual Release, Depth and Threshold controls
Hardwire bypass IN/OUT switch
Open/Closed gate status LED
Marker panel for labelling gate assigns
Rear Panel
Balanced Inputs and Outputs, on Balanced jack
connectors
Sidechain Insert/Key Input TipRingSleeve jack on
each channel
AC input connector, with voltage switch and fuse 

DBX 1215
Ισοσταθμιστής 2 x 15 περιοχών με XLR IN/OUT

1215 Dual 15-Band Graphic Equalizer

The dbx 12 Series were designed to meet the needs of the most
demanding sound reinforcement environments, while offering the
simplicity of straightforward controls. The 1215 provides standard
features like dual channels, 15 2/3 octave bands, ISO frequency
centers, +/-12 dB input gain range, and switchable 40Hz/18 dB per
octave low-cut filters, but also includes other thoughtful features.
These include 45 mm faders; selectable +/-6dB or +/-15dB boost/cut
range for precise gain adjustments; XLR, barrier strip, and 1/4'' TRS
connectors for installation ease; balanced inputs and outputs for quiet
operation; and chassis/signal ground lift capabilities for quick hum isolation.
The visionary design of the dbx 12 Series makes your job easier.

The dbx 12 Series Equalizers were precision engineered to provide years
of maintenance-free operation in any application. The magnetically isolated
transformer, electronically balanced/unbalanced inputs and servo balanced/
unbalanced outputs, RF-filtered inputs and outputs, and power-off hard-wire
relay bypass with 2 second power up delay were steps our engineers took
to ensure compatibility for all installations. Only the best components were
utilized, yielding a 10Hz to 50kHz frequency response, greater than 90dB SNR
(ref +4dBu), less than 0.005% THD +Noise (1kHz at +4dBu), and interchannel
crosstalk of less than -80dB from 20Hz to 20kHz. All this attention to detail
is contained in a 2U steel/aluminum chassis.

•   Switchable boost/cut ranges of ±6 or ±15 dB
•   Electronically balanced/unbalanced inputs
•   Servo balanced/unbalanced inputs
•   RF filtered inputs and outputs
•  XLR, Barrier Strip, and 1/4" TRS connectors
•  -12dB/+12dB input gain range
•  18dB/octave 40Hz Bessel low-cut filter
•  Chassis/signal ground lift capability
•  Internal power supply transformer
•  Power-off hardwire relay bypass with 2-second power-up delay

DBX ZONEPRO 1260

Ψηφιακός επεξεργαστής αναγγελιών 4 ζωνών. Διαθέτει 12 in/6 out. Διαθέτει agc (automatic gain leveler)
EQ, crossover, limiter, compressor, noise gate, parametric EQ, security lockout, AFS περιοριστή
μικροφωνισμών, RS 232 για έλεγχο και ρύθμιση μέσω PC, ethernet in & out. Δέχεται τα wall panel
dbx ZC. Ιδανικό για: ξενοδοχεία, εμπορικά κέντρα, καταστήματα, bar restaurants, cafe κτλ. δυνατότητα
να συνδεθεί και με άλλες ίδιες μονάδες και να επεκταθεί.

DBX-1046
Compressor - limiter 4 εισόδων, κύκλωμα "overeasy“, peakstoplus,
είσοδοι - έξοδοι XLR και 1/4 TRS. Κατάλληλος για studio, live χρήση.

• Four independent channels of operation, stereo linkable in two pairs
• PeakStopPlus™ limiting control for setting maximum allowable level regardless of compressor settings
• Independent Threshold and ratio controls
• Switchable OverEasy® or Hard Knee compression
• Classic dbx® compression
• Differentially balanced gold-plated XLR and 1/4" inputs and outputs
• True RMS level detection
• Precision metering of input level, output level, and gain reduction
• Dual True stereo or quad mono operation
• Switchable +4dBu or -10dBV operation per channel

Νέα έκδοση S ηλεκτρονικού crossover 3 δρόμων με επιλεγόμενη συχνότητα cross, ρυθμιζόμενο input & output level, κλίση αποκοπής 24dB ανά οκτάβα, L & R είσοδοι & balanced έξοδοι με XLR.

More sound to your amps and speakers

The secret to making speakers sound great lies with the crossover you use. With the dbx® 234xs Crossover you'll get great performance, ultra low-noise, rugged reliability and four decades of dbx knowledge and expertise in building the world's finest processors. The 234xs uses precision filters to separate the audio signal and direct the correct frequencies to your loudspeaker drivers. By directing only the specific frequency bands to each speaker driver the 234xs leaves your amplifiers free to use their full power on the usable signal eliminating distortion and giving your PA system a cleaner and better sound.

The dbx 234xs is a dual channel crossover with all the features you would expect from a professional product. It features Linkwitz-Riley 24dB per octave filters, independent output gain controls for level matching, output phase inversion, 40 Hz low cut filter, and optional mono summing of the low frequency (subwoofer) output. Everything in the design exudes great precision from the solid "click" controls to the high quality XLR inputs and outputs.

XLR balanced ins and outs

Mode switches for mono 4-way or stereo 2-way/3-way operation

Low frequency summed (subwoofer) output

x10 range switch on both channels

40Hz high pass (low cut) filter both channels

Phase reverse switch on all outputs

Individual level controls on all outputs

24dB per octave Linkwitz-Riley filters (the professional standard)

Stereo/Mono status LEDs indicate the selected mode

dbx® 2 year parts and labor as standard

CSA NRTL/C approved

CE compliant