Content | The SWU400T is an affordable lighting stand that features convenient height adjustment by means of a hand crank. Thanks to its high load bearing capacity of 85 kg, the removable crossbar, and the upper tube with a diameter of 35 mm, the SWU400T is also suitable for use as a speaker stand.
The sturdy steel construction has a black powder-coated finish; the upper tube and extensions are galvanized. A levelling foot ensures secure positioning of the wind up stand even on uneven surfaces. All adjustable elements are secured with spring bolts in addition to the tommy screws. The SWU400T weighs 19.7 kg and is extendable from a minimum height of 190.5 cm to a maximum of 4m.
Stand surface
galvanized, Powder coated
Crossbar surface
Powder coated
Stand colour
galvanized, silver
Holding fixture for TV Spigot
no
Additional information
incl. crossbar, TÜV-certified
|
Product type
Stands and Tripods Multimedia Equipment
Tubing surface
Powder-coated
Width adjusting jaws
40 mm
Width spacing between adjusting pins min.
120 mm
Width spacing between adjusting pins max.
425 mm
Height spacing between adjusting pins to adjusting jaws min.
117 mm
Height spacing between adjusting pins to adjusting jaws max
250 mm
Width spacing between adjusting jaws min.
130 mm
Width spacing between adjusting jaws max.
360 mm
Height adjustment
Set screw with safety split pin
Dimensions Base (W x H x D)
565 x 20 x 330 mm
Interchangeable rings
1 x 25 mm, 2 x 30 mm, 4 x 15 mm
Black ring pack included
Yes
|
The GLSTBTV17 is a classic tripod lighting stand with twin extensions, made from thick walled, yet lightweight powder coated steel tubing. The die-cast aluminium leg collar has been completely redesigned to provide superior durability and longevity.
The unbreakable height adjustment collars are made of steel for additional strength and feature safety pins to securely lock the extensions in place. The ergonomic set screw knobs are made from high grade ABS with a soft touch, non-slip thermoplastic coating for comfortable handling. The stand includes a T-Bar with an ergonomically formed and rubberised T-Joint – making the T-Bar not only easier to handle and carry but also better looking than regular stands.
Product type
Stands and Tripods
Type
Lighting Stands
Stand material
Steel
Truss material
Steel
Stand surface
Powder coated
Crossbar surface
Powder coated
Stand colour
Black
Number of extensions
2
Min. height
1100 mm
Max height
2500 mm
Max. load
30 kg
Holding fixture for TV Spigot
Yes
TV spigot
17 mm
Crossbar length
950 mm
Weight
5,8 kg
| Proffesional wind up stand made of strenghtened steel loads up to 60kg. Installed ratchet lock protects fixed equipment against uncontrolled falling down and damage. Itʼs an ideal solution for mobile DJ and musicians.
Material: steel
Load capacity: 60 kg
Maximum height: 2,70 m
Base spread diameter: 1,54 m
Height: 1,60 m
Pipe diameter: 35 mm
Weight: 12 kg | The LS 331 B lighting stand features a large heavy steel base providing a firm footing and a single extension for a maximum height of 2.4 m. The 35 mm pole includes a male threaded M20 insert, the base tube has a female M20 end. Two integrated base handles facilitate transport.
Product type
Stands and Tripods
Type
Lighting Stands
Tube material
Steel
Tubing colour
Black
Tubing surface
Powder coated
Min height
1420 mm
Max height
2420 mm
Transport length
1420 mm
Height adjustment
set screw and safety pin
Number of extensions
1
Base material
Steel
Material of height adjustment
Steel
Tube diameter
35 mm
Dimensions Base (W x H x D)
563 x 563 x 15 mm
Base weight
14 kg
Interchangeable rings
1 x 30 mm
Black ring pack included
Yes
Max. load capacity
20 kg
Weight
17,8 kg |
If you are a rental or installation company, DJ or solo entertainer, you have almost certainly experienced this or a similar situation: You need two spotlights to illuminate a specific area. As a professional, you aspire to make your construction discreet and attractive. Ideally it should not attract attention. There are slimline, elegant stands for this, such as the LS 331 B from Gravity. However, if you install a standard T-bar, the combination appears clumsy and oversized. You don\'t need a clavilux, just two spots. The LS SUPER TB 01 Super Mini T-Bar provides the appropriate solution for this problem: With its elegant construction and adjustable width of 390-570 mm, it blends seamlessly into any environment, even museums and galleries. Thanks to the 17-mm TV spigot insert, lamps can be easily clicked into position, removing the tedious requirement of securing them with screws and wing nuts. Its flexible design enables lamps to be attached upright on the bar or suspended from it. However, despite its slimline elegance, there has been no compromise to the ruggedness of the LS SUPER TB 01: Maximum symmetrical load capacity is 20 kg per side. Spigot interval is adjustable from 330-515 mm. And if you need another spot or two, extra spigot inserts can be installed in the additional mounting holes. As you are probably already aware, ergonomic locking screws, interchangeable colour rings and high-quality workmanship come as standard with all Gravity products. The integrated Allen key holder is a small extra feature that makes this T-bar even more user-friendly. Product type Type Material Surface Color Fitting Length Stud spacing Max. load capacity Weight |
Reviews
There are no reviews yet.