| Content |
- AFTERMARKET Speaker Diaphragm Cerwing Vega , Seer
- Voice coil: 1.35" (34mm)
- Overall Diameter: 3.15" (80mm)
- Mounting Holes : 2.87" (72.9mm) Center to Center
- Impedance: 8 ohm, DCR: 6.0 ohm
- Titanium dome with edge wound voice coil on Kapton former
- Fits Driver and Cabinet Models:
AKIYAMA : PB12, PB12A, PB10, PB10A Cerwin Vega: CD-34A, CD34A, CD 34A, CT-345A, CT345A, CT 345A, Intense, Intense 152, Intense 252, INT-152, INT152, INT 152, INT-252, INT252, INT 252, DIAP00001, COMP00004, Cerwin Vega: CD-34A, CD34A, CD 34A, CT-345A, CT345A, CT 345A, Intense, Intense 152, Intense 252, INT-152, INT152, INT 152, INT-252, INT252, INT 252, DIAP00001, COMP00004, Eminence: PSD1001 / PSD1001B , SEER: PS8, PS10, DB TECHNOLOGIES: CROMO 12+, CROMO 15+, FLEXSYS FM12, OPERA 512DX, OPERA 515 DX, OPERA 710DX, OPERA 712 B LINE, OPERA 712 DX, OPERA 715 B LINE, OPERA 715 DX, OPERA 410D, CROMO 12, CROMO 15, BASIC 400, OPERA 10, OPERA 12, OPERA 15, OPERA 710BL. Monacor : PAB-125/VC, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
| Model Number |
B33410 |
| VC Diameter |
34 mm |
| VC Bobbin Material |
KSV |
| VC Wire |
|
| Diaphragm Material |
Coat |
| Tracery on Diaphragm Edge |
|
| Diaphragm Out Diameter |
|
| Diaphragm Height |
|
| Diaphragm Thickness |
0.04 mm |
| RDC |
|
| Fit Wash Size |
Φ |
| Replacement |
|
|
The JBL D16R2450 is the replacement HF diaphragm for the following JBL products:
- SR4731A
- SR4733A
- SR4731X
- SR4732X
- SR4733X
Note: If your speaker has an Ultra HF driver as well as a HF driver, the Ultra HF driver takes a different diaphgragm.
|
-
JBL Original Speaker Diaphragm Part # D8R2418-1
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs. |
Replacement diaphragm kit for 22XT driver
FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P
|
![]()
|
Reviews
There are no reviews yet.