| Content | AFTERMARKET ND2060 EIGHTEEN SOUND ND2080, ND1460 ND1480 VC 74.5mm
- AFTERMARKET Speaker Diaphragm 18Sound
- Replacement for ND2060 ND2080 ND1460 ND1480 ND1075
- Voice coil: 3" (74.5mm)
- Overal Diameter: 102mm
- Dome Height: 13.5mm
- The center Distance of the Two Post Terminals: 110mm
- Impedance: 8 ohm, DCR: 5.8 ohm
- Titanium dome with copper voice coil
- Fits Driver and Cabinet Models: EAW KF850*, JFX65 spec number 047108N210
ND2060 / ND2080 / ND1460 / ND1480 / 15CX1000 HF / 12CX800 HF - RCD001480TI080A - 047108N210
*Does not fits for all KF850 versions
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
| Model Number |
B44450 - ZJ-18S-74 |
| VC Diameter |
74.5 mm |
| VC Bobbin Material |
KSV |
| VC Wire |
CCAR/ALR/SV |
| Diaphragm Material |
Titanium |
| Tracery on Diaphragm Edge |
|
| Diaphragm Out Diameter |
mm |
| Diaphragm Height |
mm |
| Diaphragm Thickness |
mm |
| RDC |
5.8Ω |
| Fit Wash Size |
|
| Replacement |
|
|
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs. |
The JBL D16R2450 is the replacement HF diaphragm for the following JBL products:
- SR4731A
- SR4733A
- SR4731X
- SR4732X
- SR4733X
Note: If your speaker has an Ultra HF driver as well as a HF driver, the Ultra HF driver takes a different diaphgragm.
| JBL D16R2408 Genuine Diaphragm for 2408H 16 Ohm
This genuine JBL replacement diaphragm is compatible with the 2408H horn driver. JBL part number D16R2408.
This driver has been used in many JBL cabinets. |
This diaphragm is used in models 2404H, 2404H-1, and 2405. This diaphragm is also the correct replacement for the Peavey HT94!
Specifications:
8 ohm
DCR is 6.1 +or- 8%
Overall diaphragm diameter 2 15/16-in or 75mm
Voice coil diameter 1 3/4-in or 44mm
|
- Replacement diaphragm kit for 14XT™driver
for Impulse 100, TLS-2, TLS 2X, TLS-4, TLS-5, TLS 5X, TLM-2, TLM-5,Impulse 100P, Impulse 100 White, PR 10, PR 12, PR 15, SSE-10,SSE-12, SSE-15, SSE-6, SSE-26
-
Peavey 14XT Diaphragm Part # 00442500
-
Voice coil: 1-3/8" (35.5mm)
-
Diameter: 2-3/4" (70mm)
-
Impedance: 8 ohms, Re: 6.8 ohms
-
Titanium dome with edge wound voice coil on Kapton former
-
Fits Peavey Driver and Cabinet Models:
Peavey: 14A, 14-A, 14 A, 14XT, 14-XT, 14 XT, Impulse 100, TLS-2, TLS2, TLS 2X, TLS-4, TLS4, TLS-5, TLS 5X, TLS5X, TLM-2, TLM-5, Impulse 100P, Impulse 100 White, SSE-10, SSE-12, SSE-15, SSE-6, SSE-26, 00442510, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Reviews
There are no reviews yet.