| Content | EV Electro Voice 800810100 8 ohm AFT Diaphragm for ND2-8 ND2S-8 ZX3 ZX5 TX2152
This is a high quality aftermarket diaphragm that fits many Electro Voice models.
Specs:
Overall Diameter: 3.125" ( 79.38mm)
Voice Coil Diameter: 2" ( 50.80mm)
Diaphragm Material: Titanium
Nominal Impedance: 8 ohms
DCR: 5.0 ohms. Just like the original!
Here is a list of the driver part #'s:
ND2-8 and ND2S-8.
Here is the list of some of the cabinet model #'s:
EVF Series:
EVF-1122S/64, EVF-1122S/94, EVF1122S/96, EVF-1122S/99, EVF-1122S/126, EVF-1152S/43, EVF-1152S/64, EVF-1152S/66, EVF-1152S/96
EVH Series:
EVH-1152S/64, EVF-1152S/66, EVH-1152S/94, EVF-1152S/96, EVH-1152S/99
Other Models:
TX 2152, XLD 281, XLD 291, XLE 181, XLE 191, ZX3, ZX5 and more. | | MODEL ZG-10CA / DG-10C-A
M-D-10C
26A65D1F
087838253383
TOA 507 07 008 30
TOA Voice for Horn SC-630, SC630M |
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
-
JBL Original Speaker Diaphragm Part # D8R2418-1
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
| Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Reviews
There are no reviews yet.