Content |
- AFTERMARKET Speaker Diaphragm
-
Replacement for several Speaker brands
-
Voice coil: 1.75" (44.4mm)
-
Diameter:
-
Length:
-
Impedance: 8 ohm, DCR: 6.2 ohm
-
Titanium dome
-
Fits Driver and Cabinet Models: 2420, 2421, 2470, LE175, LE85, 2425, 2426, 2427H, D8R2420, D8R2421, D8R2425, D8R2426
Please check your model before ordering to make sure you are getting the correct diaphragm.
Specification of the tweeter:
Model Number |
ZJ44T08 |
VC Diameter |
44.4 mm |
VC Bobbin Material |
KSV |
VC Wire |
CCAR/ALR/SV |
Diaphragm Material |
Titanium |
Tracery on Diaphragm Edge |
|
Diaphragm Out Diameter |
mm |
Diaphragm Height |
mm |
Diaphragm Thickness |
0.03 mm |
RDC |
6.2Ω |
Fit Wash Size |
|
Replacement |
|
| Replacement diaphragm kit for RX™22 driver
Impulse 1012 8 Ohm, Impulse 1012 4 Ohm, Impulse 1012P,Impulse 1015 8 Ohm, Impulse 1015 4 Ohm, DJS4, DJS 5, SP2X, SP3X,SP4X, SP5X, SP5XL, SP6X, SP112MX, SP115MX Impulse 1015P, QW 3, QW 3F, TLS 6X, SP2, SP3, SP4, SP5, SP6, SP12M, SP15M, SP 8
- Peavey Factory Speaker RX22, 22XT, 22XT+ Original Diaphragm Part # 00452400
- NEW! Now used for ALL 22 series drivers: RX22, 22A, 22XT, 22XT+
- Voice coil: 2" (50mm)
- Diameter: 4-1/2" (115mm)
- Impedance: 8 ohm
- Titanium dome with edge wound copper clad aluminum voice coil on high temp composite bobbin
- Installation instructions, Ferro Fluid, and new mounting bolts included on new diaphragms starting mid 2015Please check your model before ordering to make sure you are getting the correct diaphragm.
|
-
JBL Factory Speaker Diaphragm Part # D8R2418
-
Voice coil: 1-3/4" (45mm)
-
Diameter: 3" (75mm)
-
Length: 5-1/8" (130mm)
-
Impedance: 8 ohm, DCR: 4 ohm
-
Titanium dome with copper voice coil on Kapton former.
-
Fits JBL Driver and Cabinet Models:
JBL: 2418, JBL 2418H, JBL 2418H-1, 3622N, 3632M-HF, 3632M-HF-T, 3677S, 3722HF, 3722N-HF, 4425LR, AC2212/00-WH, AC2215/00-WH, CAB-55, CAB55, CAB 55, EON-15, EON15, EON 15, EON 15P-1/230, EON POWER15, EON-15-G2, EON15-G2, EON 15-G2, EON-15P, EON15P, EON 15P, MR-902, MR902, MR 902, ,MR-905, MR905, MR 905, MR-922, MR922, MR 922, MR-925, MR925, MR 925, MR-926, MR926, MR 926, MR-935, MR935, MR 935, MR-938, MR938, MR 938, MS-112-WH, MS112-WH, MS 112-WH, MS-115-WH, MS115-WH, MS 115-WH, and many more!
Please check your model before ordering to make sure you are getting the correct diaphragm.
|
Genuine Celestion CDX1 Driver uses T5503/R Diaphragm in 1415, 1425, 1430. 8 ohms
This is also the replacement diaphragm for the HF Driver in the QSC HPR122i, HPR153i and HPR153F speaker box. Also fits Yorkville NX300and Yorkville NX55P, NX300, YX10, YX12, YX12M, YX15, YX15P, and YX215 cabs. |
- Voice coil: 3.93″ (100mm)
- Diameter: 5″ (127mm)
- Impedance: 8 ohm, DCR: 4.7 ohm
- Titanium ribbed dome with edge wound voice coil on Nomex former
- We sell an aftermarket version of this diaphragm. See our aftermarket diaphragms page for details.
- Please check your model before ordering to make sure you are getting the correct diaphragm.
- See the “Fits Models” tab for all applicable cabinet and driver numbers.
|
Replacement diaphragm kit for 22XT driver
FOR HV1200, PR1500, 1522HC, CL-2, CL-1, 115 Int. Series III Oak, HKS-15, 115TF, 112TI, 115TI, HV1280, PR1280, SP2XT, SP4XT, SP5XT, DJS1800, 112SE, Impulse 200, SP2G, SP4G, SP5G, Impulse 200P 112DLM, 115DLM, SP112M, SP115M, Impulse 200 4 Ohm, SP3G, SP6G, Impulse 1280, 115CM, 115TF, Impulse 1282, HV1282, 112TLM, 115TLM, Impulse 200 8 Ohm, 1522TLS,Ιmpulse 500, DS1502, DS1803, DS3003, 1545TI, MF1-X/MK-3 Series, SP2Ti, SP4Ti, SP5Ti, 115 Int. HC, 118 Int. HC, 3020HT, 1245M, HDH-1, 112PS, HDH-4, 115TF Bleached Oak Enc., Impulse 500 4 Ohm Impulse 500P
|
Reviews
There are no reviews yet.