AKG AC 12/EU 12V AC-ADAPTER

15%
AKG
All products by AKG

Original price was: €49.60.Current price is: €42.00. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation €
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: AC 12/EU Category:
12V AC-adapter for PS 4000, ASU 4000, HUB 4000, HPA 4000, CU4000 or SR 4000

 

Read more

12V AC-adapter for PS 4000, ASU 4000, HUB 4000, HPA 4000, CU4000 or SR 4000

Weight 0.50 kg

Reviews

There are no reviews yet.

Be the first to review “AKG AC 12/EU 12V AC-ADAPTER”

Your email address will not be published. Required fields are marked *

Quick Comparison

AKG AC 12/EU 12V AC-ADAPTER removeGravity MA 3D A POP 1 Traveler 3D Arm with Pop Filter removeShure P4HW Wired Bodypack Personal Monitor removeRODE Interview Go Handheld Adaptor for Wireless Go removeRODE RODEGRIP Multi-Purpose Mount for iPhone 4/4S removeAudio Technica ES945LED touch-sensitive capacitive switch and LED status ring remove
NameAKG AC 12/EU 12V AC-ADAPTER removeGravity MA 3D A POP 1 Traveler 3D Arm with Pop Filter removeShure P4HW Wired Bodypack Personal Monitor removeRODE Interview Go Handheld Adaptor for Wireless Go removeRODE RODEGRIP Multi-Purpose Mount for iPhone 4/4S removeAudio Technica ES945LED touch-sensitive capacitive switch and LED status ring remove
ImageGMA3DAPOP1_Gravity-MA-3D-A-POP-1-Traveler-3D-Arm-with-Pop-Filter
SKUAC 12/EUGMA3DAPOP1P4HWH99RD00110H99RD00071ES945LED
Rating
Price Original price was: €49.60.Current price is: €42.00. incl. GR VAT Original price was: €25.73.Current price is: €20.85. incl. GR VAT Original price was: €370.00.Current price is: €344.00. incl. GR VAT Original price was: €34.00.Current price is: €29.00. incl. GR VAT Original price was: €42.35.Current price is: €38.50. incl. GR VAT Original price was: €283.43.Current price is: €246.59. incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

In stock (can be backordered)

In stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderIn stock (can be backordered)In stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Pop filter with double nylon mesh
  • Large screen diameter of 157 mm
  • Tilt and rotation of joints can be adjusted
  • Flexible clamping range from 15 mm to 35 mm
  • Easy to handle
Content

12V AC-adapter for PS 4000, ASU 4000, HUB 4000, HPA 4000, CU4000 or SR 4000

Gravity MA 3D A POP 1 Traveler 3D Arm with Pop Filter

The Traveler Series' Pop Filter with 3D Arm Every bit of weight counts when you're travelling by plane or truck from one gig to the next. After all, you can't always rely on the concert venue having the right tool available for you when needed. The Pop Filter with 3D Arm MA 3D A POP 1 can be taken everywhere you go. It's so light and space-saving, there's absolutely no need for you to worry about weight or storage space. With this tool you can enhance your voice- and vocal recordings by placing the high-quality pop filter, with double nylon mesh and a large screen diameter of 15.7 cm between you and your microphone. This way you avoid unwanted pop noises and clipping. Its fastening mechanism is quick and easy to assemble. The large clamping range from 15 to 35 mm lets you mount it on all popular microphone stands, and the three joints' 360° rotation options allow you to install it as you like. Simply loosen, adjust and tighten the wing-screws. Voila - you're all done! Once set, the MA 3D A POP 1 stays locked in place. Gravity® has once again delivered a small, useful and reliable product for you to round off your collection of stands.  
Product type Microphone Accessories
Type Pop filter
Material Plastic, Polyamide
Color Black
Joint adjustment Wing screw
Joint rotation 360°
Joint tilt 180°
Arm length 400 mm
Suitable for mounting on Microphone Stands
Thread size 3/8”
Screen diameter 157 mm
Setup Double nylon screen, plastic frame
Suitable for tube diameter 15 - 35 mm
Weight 0,377 kg
     

Shure P4HW Wired Bodypack Personal Monitor

P4HW Wired Bodypack

Hardwired Bodypack
Key Features
Attached input cable
High-impact plastic chassis
 
Operating Controls:
 
Operating mode (Stereo, Mono, MixMode)
Volume knob
Balance knob
Defeatable limiter
High-frequency boost
-15 db Pad
 
Backlit LCD Indicators :

Battery life
Input level
Operating mode 

Frequency Response
20 to 20,000 Hz
Total Harmonic Distortion
Channel Separation
35 dB (minimum)
Signal-to-noise ratio
85 dB (minimum)
Maximum Output Level
+5 dBu at 1% THD
Maximum Input Level
+7 dBu, input pad OFF
+22 dBu, input pad ON
Actual Input Impedance
> 40 kilohms
Audio Output Connector
3.5 mm stereo (left=tip, right=ring, ground=sleeve)
Power Requirements
9 V Alkaline battery
Battery Life
Up to 8 hours, volume dependant
Phantom Power Protection
Up to 60 VDC

Key Features :
  • Turn Wireless GO into Handheld Mic
  • Windshield Included
  • For ENG
Turn your Wireless GO Transmitter into a handheld microphone with the RODE Interview GO. Once the transmitter is slotted snugly into the Wireless GO\'s cradle, the adapter will give you the sound and appearance of a handheld microphone.

Featuring a camera-shoe mount with a 3/8' thread in the base that can be mounted in three different positions, the RØDEGrip can be used in a number of orientations and setups. These include:

 

  • Handheld audio recording with the iXY stereo microphone
  • Boom stand mounted audio recording with the iXY
  • Camera-mounted audio recording with the iXY
  • Handheld pistol grip filming with the iPhone
  • Desktop mounted for handsfree iPhone display and filming
  • Camera-mounted iPhone display for photography apps
  • Constructed from durable, high-quality ABS plastics, it folds down into a small, portable form factor for ease of transport.

Introducing the ES945LED, the new LED-equipped version of the Engineered Sound ES945 table-mount boundary microphone. The ES945LED features a touch-sensitive capacitive switch and LED status ring.

The omnidirectional condenser ES945/LED increases usability with a new toggle switch and LED status ring - which displays red when muted and green when switched on. The new LED-equipped version of the highly respected ES945 also features improved sensitivity and sound-to-noise ratio, perfectly suited to todayʼs digital matrix mixers.

The ES945/LED is available in black only.

 

ES945LED Specifications 263 KB

 

 

 


Weight0.50 kg0.8 kg0.20 kg0.50 kg1.00 kg0.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.50 kg
Weight 0.8 kg
Weight 0.20 kg
Weight 0.50 kg
Weight 1.00 kg
Weight 0.10 kg

Related products