Content |
The AKG HT40-FLEXX Handheld Transmitter is intended for use with the WMS40 FLEXX receiver and includes a dynamic cardioid microphone head for maximum signal-to-noise ratio and minimal off-axis noise and feedback. The HT40-FLEXX boasts up to 30 hours of power on a standard single AA alkaline battery. Like the receiver, the HT40-FLEXX transmitter provides 3 user selectable frequencies for complete flexibility and convenience.
Frequency Agile The HT40-FLEXX Series features 3 user selectable frequencies for added convenience and flexibility. Long Lasting Battery Power The HT40-FLEXX boasts up to 30 hours of power on a standard single AA alkaline battery. SPECIFICATIONS:
Type of Transmitter Handheld Frequency Agile UHF # Of Channels Single channel with 3 selectable frequencies Type of Input Connector Not Applicable Type of Microphone Dynamic Polar Pattern Cardioid Interchangeable Mic Heads No Frequency Response 65Hz to 20kHz system Battery Type/Approx. Life Not Applicable Mute Switch Lockable On/Off and Mute available Level Control 0-25dB Gain Control Antenna Type quarter-wavelength internal Display RF Status, Mute and Clip LEDs Dimensions (LxDiameter) 9 x 2.l" (229 x 53mm) Weight 1.4 lbs (630 g)
|
Switchable RF Power (10/50mW, Region Dependent)
Frequency and Power Lockout
Bit-mapped Backlit LCD Display
2 AA Batteries - Up to 8 hours Continuous Use
Automatic Transmitter Setup
All Metal Die-cast Construction
|
The WM-5320 lavalier wireless microphone has been manufactured for use with a UHF system. It employs an omni-directional electret condenser microphone element and has been designed for use in speech reinforcement applications. The built-in compressor-expander circuit minimizes the influence from ambient noise.
Microphone Element | Electret condenser microphone, omni-directional pattern | Modulation | Frequency modulation | Frequency Range | 636 - 865 MHz*, UHF | Channel Selectable | 64 channels
(the number of channels may differ from country to country) | RF Carrier Power | 50 mW or less | Tone Frequency | 32.768 kHz | Oscillator | PLL synthesized | Maximum Input Level | 110 dB SPL (Audio level control: Maximum position) | Battery | LR6 (AA) | Battery Life | 10 hours or more (alkaline) | Indicator | Power/Battery lamps | Antenna | Built-in type | Operating Temperature | -10℃ to +50℃ | Finish | Resin, coating | Dimensions | 62 (W) × 102.5 (H) × 23 (D) mm | Weight | 110 g (with battery) | Accessory | Screw driver ……1, Storage case ……1, Neck strap ……1 |
|
Shure SLX2-BETA87C-R5 Wireless Microphone
Features:
Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range
Operating Range Under Typical Conditions
100m (300 ft.)
Note: actual range depends on RF signal absorption, reflection, and
interference
Audio Frequency Response (+/? 2 dB)
Minimum: 45 Hz
Maximum: 15 kHz
(Overall system frequency depends on microphone element.)
Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)
0.5%, typical
Dynamic Range
>100 dB A-weighted
Operating Temperature Range
?18°C (0°F) to +50°C (+122°F)
Note: battery characteristics may limit this range
Transmitter Audio Polarity
Positive pressure on microphone diaphragm (or positive voltage applied
to tip of WA302 phone plug) produces positive voltage on pin 2 (with
respect to pin 3 of low impedance output) and the tip of the high
impedance 1/4-inch output.
SLX1 Bodypack Transmitter
Audio Input Level
-10 dBV maximum at mic gain position
+10 dBV maximum at 0 dB gain position
+20 dBV maximum at -10 dB gain position
Gain Adjustment Range
30dB
Input Impedance
1 MΩ
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions
108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)
Weight
81 grams (3 oz.) without batteries
Housing
Molded ABS case
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX2 Handheld Transmitter
Audio Input Level
+2 dBV maximum at -10dB position
-8 dBV maximum at 0dB position
Gain Adjustment Range
10dB
RF Transmitter Output
30 mW maximum (dependent on applicable country regulations)
Dimensions (including SM58 cartridge)
254 mm x 51 mm dia. (10 x 2 in.)
Weight
290 grams (10.2 oz.) without batteries
Housing
Molded PC/ABS handle and battery cup
Power Requirements
2 ?AA? size alkaline or rechargeable batteries
Battery Life
>8 hours (alkaline)
SLX4 Receiver
Dimensions
42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)
Weight
816 g (1 lb. 13 oz.)
Housing
Galvanized steel
Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)
XLR connector (into 600 Ω load): ?13 dBV
1/4 inch connector (into 3000 Ω load): ?2 dBV
Output Impedance
XLR connector: 200 Ω
1/4 inch connector: 1kΩ
XLR output
Impedance balanced
Pin 1: Ground
Pin 2: (+)
Pin 3: (-)
Sensitivity
?105 dBm for 12 dB SINAD, typical
Image Rejection
>70 dB, typical
Power Requirements
12?18 Vdc at 150 mA, supplied by external power supply
|
Product Highlights
3-pin XLR Input
Supports Dynamic Microphones (Only)
24MHz Operation
Compatible with SLX Series
960 Selectable Frequencies
12 Multiple Channels Per Band
25 Maximum Compatible Channels
Infrared Sync to Receiver
Battery Powered with AA Batteries x2
|
EB-193
Wireless PLL Beltpack Transmitter 193 freq 822-846 MHz
• PLL synthesised 193 switchable
frequencies.
• Operation in the UHF range
• Compatible for lavalier or headset
microphones
• Powered by AA batteries
• Equipped with 4P mini XLR connector
• LCD
Frequency Preparation: PL Synthesized Control
Carrier Frequency Range: 600-960 MHz
RF Output: 10 mW
Stability: ±0.005%
Frequency Deviation: ±48 kHz
LCD Display: Frequency, battery
fuel gauge
Controls: Power On/Off, AF level,
Frequency Up/Down, Lock-on mode
Spurious Rejection:
Audio Freq. response: 50 Hz - 16 kHz
Battery: UM3, AA 1.5V x 2 |
Reviews
There are no reviews yet.