Content |
The AKG HT40-FLEXX Handheld Transmitter is intended for use with the WMS40 FLEXX receiver and includes a dynamic cardioid microphone head for maximum signal-to-noise ratio and minimal off-axis noise and feedback. The HT40-FLEXX boasts up to 30 hours of power on a standard single AA alkaline battery. Like the receiver, the HT40-FLEXX transmitter provides 3 user selectable frequencies for complete flexibility and convenience.
Frequency Agile The HT40-FLEXX Series features 3 user selectable frequencies for added convenience and flexibility. Long Lasting Battery Power The HT40-FLEXX boasts up to 30 hours of power on a standard single AA alkaline battery. SPECIFICATIONS:
Type of Transmitter Handheld Frequency Agile UHF # Of Channels Single channel with 3 selectable frequencies Type of Input Connector Not Applicable Type of Microphone Dynamic Polar Pattern Cardioid Interchangeable Mic Heads No Frequency Response 65Hz to 20kHz system Battery Type/Approx. Life Not Applicable Mute Switch Lockable On/Off and Mute available Level Control 0-25dB Gain Control Antenna Type quarter-wavelength internal Display RF Status, Mute and Clip LEDs Dimensions (LxDiameter) 9 x 2.l" (229 x 53mm) Weight 1.4 lbs (630 g)
|
EB-193
Wireless PLL Beltpack Transmitter 193 freq 822-846 MHz
• PLL synthesised 193 switchable
frequencies.
• Operation in the UHF range
• Compatible for lavalier or headset
microphones
• Powered by AA batteries
• Equipped with 4P mini XLR connector
• LCD
Frequency Preparation: PL Synthesized Control
Carrier Frequency Range: 600-960 MHz
RF Output: 10 mW
Stability: ±0.005%
Frequency Deviation: ±48 kHz
LCD Display: Frequency, battery
fuel gauge
Controls: Power On/Off, AF level,
Frequency Up/Down, Lock-on mode
Spurious Rejection:
Audio Freq. response: 50 Hz - 16 kHz
Battery: UM3, AA 1.5V x 2 |
The FP1 Bodypack Transmitter features a lightweight and durable design for use with TA4F-connection microphones including lavaliers and headsets.
Ideal for use with FP Wireless and SLX Wireless.
FP Wireless Systems feature patented Audio Reference Companding for crystal-clear sound beyond the limits of conventional wireless technology.
Automatic transmitter setup that instantly syncs the transmitter to the receiver frequency
LED indicator for control lockout, IR RF sync, and low battery
Audio input gain for adjustment of audio level
4-Pin microphone input jack for use with lavaliers or headset microphones with TA4F connectors
Gain Adjustment Range
−10 to +20 dBV
Input Impedance
1 MΩ
RF Output Power
10 to 30 mW (varies by region)
Pin Assignments
TA4M
1: ground (cable shield)
2: + 5 V Bias
3: audio
4: Tied through active load to ground (On instrument adapter cable, pin 4 floats)
Dimensions
108 mm x 64 mm x 19 mm (H x W x D)
Weight
81 g (3 oz.), without batteries
Housing
Molded polycarbonate case
Power Requirements
2 AA batteries, 1.5 V
Battery Life
Up to 12 hours (alkaline)
|
Artist Elite® AE3300 cardioid condenser capsule with integral shock mount Available in the following frequency bands: 541.500 - 566.375 MHz (C Band) 655.500 - 680.375 MHz (D Band) 721.500 - 746.375 MHz (G Band) 25 kHz frequency spacing makes it easier to find a clear, open frequency in crowded RF environments Two-stage pop filter to protect against "p” pops Dual output power selection to optimize battery life Digital Tone Lock™ squelch to identify the wireless transmitter to the receiver High efficiency dual companding system for flawless audio Function menu displayed in a backlit LCD window and controlled by internal touch switchesFour nameable user presets Operates on two AA batteries Battery fuel gauge LCD readout on the body of the microphone Power/mute lock provision Dual-colour power/mute status indictor 18 dB audio input level adjustment Integral capsule 6 dB pad switch Rugged metal housing with integral antenna Supplied with a heavy-duty microphone stand clamp RF Power Output: High: 35 mW; Low: 10 mW, nominal Spurious Emissions: According to National Regulations Dynamic Range: >=110 dB, A-weighted Microphone Element: Cardioid Condenser Batteries: Two 1.5V AA alkaline (not included) Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern Dimensions: 239mm long, 50mm diameter Net Weight: 270g Accessory Included: AT8456a Quiet-Flex™ stand clamp
| Features
Automatic Transmitter Setup instantly syncs the transmitter to the receiver frequency
LED indicator for control lockout, IR RF sync, low battery indicator
Powered by 2AA batteries
SM58 or VP68 microphone capsule options
Additional microphone capsules available as accessories: VP68, Beta 87A, Beta87C, Beta 58A, SM86
Specifications
Transmitter Type: Handheld
Dimensions: 254 mm x 51 mm
RF Output Power: 10 - 30 (country specific)
Battery, endurance: 2AA, up to 12 h
Weight: 290 g |
Modulation
FM (45 kHz max. deviation)
Frequency Range
470–952 MHz (depending on region)
Tuning Bandwidth
Up to 80 MHz (depending on region)
Antenna
Dipole, UR3 housing and attached microphone form the antenna
Carrier Frequencies
Up to 3200, tunable in steps of 25 kHz (depending on region)
RF Power Output
Selectable 10 mW or 50 mW maximum, depending on region
Power Requirements
Two (2) 1.5V AA alkaline
Battery Life
10 Hours (alkaline) with no phantom power @ 10 mW, typical (frequency band dependent)
4 Hours (alkaline), with 48 V phantom power @ 50 mW, typical (frequency band dependent)
Gain Adjustment Range
-10 to +20 dB, MIC or LINE input setting
Pilot Tone
32 kHz
Frequency Stability
± 0.0015%
Spurious Radiation
75 dB below carrier (typical)
Equivalent Input Noise
-127.0 dBV, A-weighted (audio front end)
Maximum Audio Input level
+24 dBV (LINE input, 0 dB gain)
-21 dBV (MIC input, 0 dB gain)
Differential Input Impedance
6 kΩ LINE input setting
3 kΩ MIC input setting
System Frequency Response
35 Hz–17 kHz, (+1.5 dB, -3 dB)
Note: Overall system frequency response depends on the microphone element and receiver.
High Pass Filter
Two-pole (12 dB per octave), selectable cut off frequency from 40 Hz to 240 Hz
System THD+N
|
Reviews
There are no reviews yet.