| Content |
With the K550s, AKG engineers have struck a masterful balance between the noise-isolating qualities of closed-back headphones and the spacious, dimensional sound of an open-back design creating reference-class headphones ideal for private listening both at home and on the go. 50mm drivers, the largest in our product line, deliver great AKG sound from your hi-fi system or virtually any portable device.The large ear cups and new headband design ensure an amazingly comfortable fit, and the 2D-axis mechanism folds flat to stow or go. | The ATH-M20x professional monitor headphones are a great introduction to the critically acclaimed M-Series line. Modern design and high-quality materials combine to deliver a comfortable listening experience, with enhanced audio and effective isolation. An excellent choice for tracking and mixing.
- Advanced build quality and engineering
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
- Tuned for enhanced low-frequency performance
- Circumaural design contours around the ears for excellent sound isolation in loud environments
- Convenient single-side cable exit
Specifications
- Type: Closed-back dynamic
- Driver Diameter: 40 mm
- Magnet: Neodymium
- Voice Coil: Copper-clad aluminum wire
- Frequency Response: 15 - 20,000 Hz
- Maximum Input Power: 700 mW at 1 kHz
- Sensitivity: 96 dB
- Impedance: 47 ohms
- Weight: 190 g (6.7 oz), without cable and connector
- Cable: 3.0 m (9.8'), straight, left-side exit
- Accessory Included: 6.3 mm (1/4“) snap-on adapter
|
- Professional hi-fi stereo studio headphones
- Semi-open, circumaural design
- Self-adjusting headband for optimum fit
- Patented Varimotion speakers
- Leatherette ear pads and velvet ear pads
- Single-sided, detachable 3 m cable and additional 5 m coiled cable
The K 240 MK II is a newly updated version of AKGʼs most successful headphones with Varimotion™ technology and XXL transducers. The K 240 MK IIʼs semi-open ear cups have around-the-ear coupling to deliver solid bass, accurate mids and crystal-clear highs.
Thanks to its lower impedance and improved sensitivity, it can be used with low-output audio sources to deliver its incredible sound.
The detachable OFC cable has gold-plated plugs for optimum audio quality and exceptional ease of service.
| Type |
semi-open, dynamic headphones |
| Sensitivity |
91 dB/mW, 104 dB/V |
| Frequency range |
15 to 25,000 Hz |
| Rated impedance |
55 ohms |
| Max. input power |
200 mW |
| Earpads |
leatherette and velvet |
| Cable |
3 m single-sided and 5 m coiled cable (99,9% oxygen-free); plug-in cable on headphones (mini-XLR connector) |
| Connector |
gold plated stereo mini jack |
| Adapter |
gold plated 1/8" to 1/4" screw-on adapter |
| Net weight (without cable) |
240 g (8.5 oz.) |
| Shipping weight |
550 g (19.4 oz.) |
| Patent(s) |
Varimotion – multiple-thickness diaphragm for dynamic transducer (Patent no. AT 403.751, US 6,185,809, EP 814.637 (DE, DK, FI, FR, GB, IT, NL), JP 3.927.651); Acoustics slot resistor for dynamic transducer (Patent no. AT 408.706, US 6,639,991, ZL 01116806) |
|
HSC 171
Professional headset with cardioid, shock mounted, speech optimized condenser
microphone. Main application: Live-commentaries and broadcast. The microphone?s
frequency range is 20-20,000 Hz with a sensitivity of 25 mV/Pa. The required feeding
voltage is 9 to 52 V phantom-power. Impedance is 200 ohms. The headphone?s impedance
is 55 ohms with an audio bandwidth of 18-26,000 Hz. Type: supra-aural, closed-back
with self-adjusting headband. Microphone arm is swivelling through 270 degrees for
left or right-hand use with integrated mute switch. 10 ft (3m) coiled cable, with 6-pin
female mini XLR connector, ?? jack plug (headphones) and 3-pin XLR connector with
integrated HSC-PA phantom power adapter (microphone).
Net/shipping weight: 250/720g (8.8/25.2 oz.)
| In todays demanding studio environment, the right set of headphones can make or break your performance. You need high quality and superb Frequency response to insure you get the best results from your recordings. The HPS5000 studio headphones were custom designed to meet and exceed the expectations of the most discerning audiophiles, bringing out pure listening performance by providing an ultra-wide frequency response, well defined bass and super-transparent highs. Their high-efficiency cobalt capsules, a single-sided cord with oxygen-free copper wires and optimized oval-shaped ear cups make the HPS5000 a truly studio-worthy set of headphones.
Budget Headphones Closed Type with High-performance Studio Headphones
Headphones are indispensable, and whether you are in the studio or at home, the Behringer HPS5000 headphones will give you the quality sound you want. The high-resolution cobalt capsules have a wide frequency response and dynamic range, giving you high-definition bass and transparent highs. Comfortable oval-shaped earcups and a padded headband make these headphones comfortable to wear for hours of listening. The Behringer HPS5000 headphones are a great choice and are sure to fit your budget.
Behringer HPS5000 Headphones Features at a Glance:
- Ultra-wide frequency response
- High-definition bass and super-transient highs
- Highly-efficient cobalt capsule
- Outstanding dynamic range
- Single-sided coiled cord with oxygen-free copper wires
- Optimised oval-shaped ear cups
- 1/8'' connector plus 1/4'' adapter included
- Ultra-rugged headband construction
- Designed and engineered in Germany
Headphone
| Driver Size |
1.6" / 40 mm |
| Driver Type |
Dynamic |
| Magnet Type |
Cobalt |
| Design |
Over-Ear (Circumaural) |
| Earcup Style |
Closed-Back |
General
| Frequency Response |
20 Hz to 20 kHz |
| Sensitivity |
113.5 dB at 1 kHz |
| Impedance |
32 Ohms |
| Maximum Power Handling |
100 mW |
Connectivity
| Audio Connector to Source |
1/8" / 3.5 mm |
| Adapter (Included) |
1/4“ |
Cable
| Cable Length |
3.3 to 8.2\' / 1 to 2.5 m (Coiled) |
| Specs:
- Semi - Open
- Innovative bass refelx system
- Rugged headband cosntruction
- Single-sided coiled cable
- Soft headband pad
- Gold plated stereo mini jack (3.5mm) and 1/4" adapter
- Transducer type: Dynamic
- Frequency response: 5 - 35,000 Hz
- Nominal impedance: 250 ohm
- Nominal SPL : 96 dB
- T.H.D: < 0.2%
- Power handling capacity: 100 mW
- Sound coupling to ear: Circumaural
- Weight (without cable) 295 g
|
Reviews
There are no reviews yet.