Allen & Heath Xone:PX5 Dj Mixer 4+1 Channel

• Type Analog
• Channels 4 + 1
• EQ 3-band / Total Kill (CH 1-4 + CH A)
• USB Soundcard 20 Channel (10 in / 10 out)
  USB2 / Class Compliant
  24bit / 96kHz
  1 x MIDI IN
  1 x MIDI Out
• Line Inputs 4 x RCA (CH 1-4)
  1 x 1/4″ TRS (CH A) Mono/Stereo
• Phono Inputs 4 x RCA (CH 1-4)
  LN/PH Switch for DVS
• USB Inputs 5 x USB (CH 1-4 + CH A)
• Mic Input 1 x XLR
• Master Output 1 x XLR (Balanced)
• Master 2 Output 1 x RCA (Un-balanced)
• Booth Output 1 x 1/4″ TRS
• Record Output 1 x RCA (Un-balanced)
• Master Insert 1 x 1/4″ TRS
• MIDI Sync/Out 1 x 5-Pin DIN
  DIN Offset Control
• Send/Return I/O
  1 x 1/4″ TRS Send
  1 x 1/4″ TRS Return
  1 x LN/Hi-Z Switch

• Internal Xone:FX Yes
• Hybrid FX Mode Yes (Internal External)
• FX Send 1 x Pre/Post Selectable (CH 1-4 + CH A)
• Filter
  1 x VCF Filter
  HPF / BPF / LPF
  Adjustable Frequency & Resonance
  Assignable CH 1-4 + CH A + External Return
• X-Link 1 x RJ45
• Headphones
  1 x 1/4″
  1 x 3.5mm
  Split Cue Monitoring
• Channel Faders 60mm VCA / Replaceable
• Chanel Meters 12 Segment LED
• Channel Fader Curve 3 Types
• X-Fader 45mm VCA / Replaceable / Innofader Compatible
• X-Fader Curve Settings 3 Types
• MIDI Clock Send + Receive
  Start / Stop / Pause / Tempo Bend (-/+)
• MIDI Assignable Yes (MIDI CC / MIDI Notes)
• BPM Detection Auto / Manual / Tap Tempo
• Earth Ground Terminals x 2
• Headroom 20dB
• AC Mains
  100 to 240V
  AC 50/60Hz
  Consumption 35W max
• Mains Adaptor 3 pin IEC socket with cable clamp
• Fuse Rating 250V AC T1AL 20mm
• Height 4.3″
• Width 12.6″
• Depth 14.8″
• Weight 11.5 lbs.

• Type Analogue
• Channels 6 + 2
• EQ Channel 1-4, 4-Band EQ Channel A-B, 3-Band Parametric EQ
• USB Soundcards Dual 24 Channel (12 in / 12 out) Hi-Speed USB2.0 / Mac Class Compliant 32bit / 96kHz MIDI over USB
• Line Inputs 4 x RCA (CH 1-4) 4 x 1/4″ TRS (CH A-D) Mono/Stereo
• Phono Inputs 4 x RCA (CH 1-4) LN/PH Switch for DVS
• USB Inputs 6 x USB (CH 1-4 + CH A – CH B)
• Mic Input 2 x XLR
• Master Output 1 x XLR (Balanced)
• Master 2 Output 1 x 1/4″ TRS (Balanced)
• Booth Output 1 x 1/4″ TRS (Balanced)
• Record Output 1 x RCA (Un-balanced)
• Master Insert 1 x 1/4″ TRS
• MIDI Out 1 x 5-Pin DIN
• Send/Return I/O 2 x 1/4″ TRS Send 4 x 1/4″ TRS Return 1 x LN/Hi-Z Switch (SND1/RTNA)

• Filter 2 x VCF Filter HPF / BPF / LPF Adjustable Frequency & Resonance Assignable CH 1-4 + CH A-B CRUNCH (Controlled Harmonic Signal Distortion)
• X-Link 1 x RJ45
• Headphones 2 x 1/4″ 2 x 3.5mm Split Cue Monitoring
• Channel Faders 60mm VCA / Replaceable
• Chanel Meters 9 Segment LED
• Channel Fader Curve 3 Types
• X-Fader InnoFADER / 45mm VCA / Replaceable
• X-Fader Curve 3 Types
• Earth Ground Terminals x 2
• Headroom 20dB
• AC Mains 100 to 240V AC 50/60Hz Consumption 45W max
• Mains Adaptor 3 pin IEC socket
• Height 109mm / 4.3″
• Width 336mm / 13.25″
• Depth 410mm / 16.2″
• Weight 7kg / 15.4 lbs.

The Xone:DB range exploits the potential of digital mixer technology to bring you maximum DJ creativity. Flexible and versatile mixer controls with an intuitive layout give the DJ full control over the mix.

The DB2 boasts twin chainable FX engines, four stereo channels, full Input matrix, and unique Trimodal EQ system. With its built in USB soundcard, MIDI control, Xone Filters and X:LINK connectivity, the Xone:DB2 unleashes the DJ's creativity. The Xone:DB2 captures the essence of DB4 in a stylish, accessible, affordable format and blurs the boundaries between DJing, production and performance for the next generation.

Boasting a massive FX library of more than 50 FX presets divided into 5 FX types: Delays/loopers, Reverbs, Resonators, Modulators and Damage, Xone:DB2 allows you to dig deep and get hands-on with your music. From subtle FX washes to total transformation of your sound - you're in control.

The two FX engines can be cascaded, or chained, to run the output of FX-X to the input of the FX-Y, allowing the audio to be processed by any combination of two different effects. Additionally any channel routed to FX-X can be processed by both engines, but the single effect on the FX-Y engine can still be accessed by routing the channel to Y.

Each FX engine has a dedicated expression control and a rotary pot to set the wet/dry level, whilst further tweaking can be performed using the global controllers under the screen.

Each of DB2's four input channels has a full input matrix that can select from four analogue (Line or RIAA), four USB, or two digital sources, allowing for a wide variety of audio sources to be connected simultaneously. The same source can also be selected on multiple channels.

Xone:DB2 adopts the fresh approach to creative equalisation introduced on DB4. The EQs can be used in three different modes - standard asymmetric EQ (+6/-26dB), total Kill (+6dB/OFF with a 24dB/octave slope), or High-Pass/Low-Pass filter with adjustable resonance.

With 2 band EQ, gain, cue and mix level and with full access to FX.

The OLED display is clearly visible, even in bright sunlight, and displays channel FX selection and current BPM, as well as being an easy interface for the Menu setup functions.

DB2's lightweight aluminium chassis is designed to make touring with the console easy.

The built-in, multi-channel USB2 soundcard allows replay and recording from computer-based audio software for 4 stereo sends and 4 stereo returns.

All controls (except Mic and Phones level) send MIDI data. The mixer can double up as a MIDI controller for DJ software via the MIDI shift button, which allows the FX selection controls to send MIDI data without changing the mixer settings. DB2 can generate internal MIDI clock which can be used to control the tempo of a connected DAW via USB and the ability to change the mixers MIDI channel.

X:LINK uses a standard RJ45 connector and distributes power and data, allowing connection to X:LINK compatible devices, saving USB ports on your computer.

Retro-fit Pro-X-Fade option kit for Xone:DB2. Pro-X-Fade  uses 100% conductive plastic  tracks and a wider stem for extended fader life. Pro-X-Fade also allows the DJ to adjust both the feel of the fader and the cut-in point to suit their personal style. Speak to your approved Allen & Heath dealer or distributor for purchasing and fitting information.

The DN-X1700 represents an important achievement by Denon\'s R&D department, which, during the development process, worked closely with some of the top professionals in the industry, gaining key input on its design and functionality. The result is a market driven professional digital mixer that is best in its class. Years of consultation and design have gone into the development of a mixer of this caliber, and nothing in its specification and construction has been sacrificed. Meticulous attention to detail, layout and component quality make operation of the DN-X1700 extremely intuitive, and Denon\'s engineers have provided every capability professional DJs will require: working with vinyl turntables, CD decks, media players, DJ software applications via laptops and USB storage devices.

Features

• 4-channel digital DJ mixer with studio quality components & specifications
• World\'s first professional DJ mixer with 32-bit DAC output
• 24 bit 96kHz USB 2.0 audio interface (soundcard) 4-in/4-out (stereo)
• MAC OSX 10.5.7 and 32-bit windows compatible
• Low latency ASIO driver for PC included
• USB MIDI In/Out and 5-pin MIDI Out
• MIDI mapping for various software is available
• Dual layer control available - MIDI/Normal Audio
• 2 independent effectors with 12 effects available for each:
  Delay
  Echo
  Trans
  Flanger
  Filter
  Phaser
  Reverb
  Loop
  Rev. Loop
  Pitch Shift
  BeatBreaker
  Send/Return
• 2-way EFX Parameter Filter (LPF/HPF)
• Independent EFX 1 & 2 Insert for, Channel, Mic & Master
• Matrix Input Assignment for Line/Phono and selectable USB Audio, Digital Input
• Discrete FET phono preamp stage (4 phono inputs)
• Discrete Mic Circuit w/studio mixer quality specs
• Discrete high powered headphone amp with studio mixer quality specs
• 45mm cross fader (flex fader) w/tension adjust & A/B cut position preset
• 60mm CP studio quality Alps K-Type channel fader
• Fader Contour control for channel and cross fader
• Fader Start function (channel/cross fader)
• Cross fader assignment function: (A, B, Thru)
• Independent 3-band isolator EQ w/Kills (High-Mid-Low)
• 3.5" TFT Color Display w/animated easy navigation
• 4 Digital Inputs (coaxial)
• Selectable digital output (44.1/48/96kHz)
• Balanced/Unbalanced master output
• Balanced booth output
• 2 mic input with ducking level control
• Send/Return for external effectors
• Extensive utility menu to customize user settings
• Preset import/export function by USB memory device (take your settings to another X1700 mixer)
• High resolution 24 segment output peak meters
• Dual power transformer construction for best possible specs (Digital/Analog sections)
• Output Limiter function w/adjustable threshold (great for Club installers)