Andowl K16 Wireless Bluetooth Audio Adapter And Mobile Charger Black

• material: plastic
• bluetooth version: 5.0
• transmitting distance: 10m
• voltage: AC100-240V-DC5V, 2.1A
• operations: Quick Charging, USB play, TF Card, U-disk play bluetooth, Remote control
• ports: USB, audio out (RCA, AUX), 3.5mm jack, TF card
• dimensions: 57 x 21 x 80mm
• colour: black

The Tascam iXJ2 allows an Apple iPhone 4/4S, iPad or iPod Touch 4G to be used with preferred microphones or

line level sources (instruments) to create CD-quality audio recordings. This handy extension is simply plugged

into the dock connector of the iOS device and is connected with up to two mono or stereo sources that can be

selected via a switch. Switchable plug-in power for small microphones and mono summing for news gathering are

also available.

The built-in A/D converter ensures high audio quality and low noise. Separate input level controls and

two-colour level indicators for the left and right channels make level adjustments easy, and a switchable

limiter can reduce sudden peaks and thus protect against unforeseen overload.

The iXJ2 is powered through the dock connector, so no battery is required. A USB input is provided to charge

the iOS device for long recordings, either through a computer or a USB charger.

An appropriate 2-track recording application (Tascam PCM Recorder) for iOS devices can be downloaded from

AppStore at no charge.

Main Features

Use your favourite microphones or line level (instrument) sources to create high-grade stereo audio recordings

with an Apple iPhone 4/4S, iPad or iPod Touch 4G
Internal A/D converter allow recordings in CD quality (44.1kHz/16-bit)
Two unbalanced stereo input connectors (accept two mono or stereo sources)
Input selection switch (A/B/STEREO)
Switchable plug-in power
Selectable mono summing for news gathering
Limiter to avoid distorted recordings (selectable to either mono or stereo operation)
Separate input level rotary controls for channels L and R
Separate input level indicators for channels L and R (green/red)
Power supply via dock connector, no battery required
USB connector available for recharging the iOS device
Easy setup (attaches to the deviceʼs dock connector)
Tascam 2-track recording app can be downloaded from the Apple AppStore at no charge
 

Specifications

Inputs and outputs
Mic/Line input (A/B)        3.5-mm stereo mini jack (unbalanced)
  Input impedance        2.2 kOhm (plug-in power ON)
10 kOhm (plug-in power OFF)
  Nominal input level        −66 dBV to −10 dBV
  Maximum input level        +6 dBV
iOS device recharging port        USB Mini-B connector
iOS device connector        30-pin dock connector
Device support        iPhone 4S, iPhone 4, iPad (3rd generation), iPad 2, iPad (1st generation), iPod touch

(4th generation)
Audio performance
Frequency range        20 Hz to 20 kHz +0/−2 dB (recording, JEITA)
S/N ratio        90 dB or more (recording, JEITA)
Power supply and other specifications
Power supply        Provided through the iOS device connector
Power consumption        125 mW
Dimensions (W x H x D)        60 mm x 47 mm x 17 mm (including connector)
Weight        30 g
Operating temperature range        5–35 °C
Design and specifications subject to change without notice.

2-Channel USB2.0 Audio Interface with USB-C Connection

• 24 Bit / 192 kHz
• XLR/TRS combo input for microphones, line signals and instruments
• +48 V phantom power switchable
• VU meter
• Monitor level control
• Headphone level control
• Switchable direct monitoring with mix control
• 2 Line outputs: 6.3 mm jack, balanced
• Stereo headphone output: 6.3 mm jack
• Integrated USB-A hub (USB-MIDI, max. 250 mA)
• MIDI in / out
• USB bus-powered
• Colour: Black
• Includes USB cable (type C to A) as well as Ableton Live Lite, NI Guitar Rig LE, Arturia Analog Lab Intro, Pre 1973, Plate 140, Tape 201, JUN 6
• Recording / Playback Channels 2x2
  Number of Mic Inputs 2
  Number of Line Inputs 2
  Number of Instrument Inputs 2
  Number of Line Outs 2
  Headphone Outs 1
  Phantom power Yes
  Number of S/PDIF Connectors 0
  Number of ADAT Connectors 0
  Numer of AES/EBU Connectors 0
  Number of MADI Connectors 0
  Ethernet 0
  Other Connectors USB
  MIDI interface Yes
  Word Clock 0
  Max. sample rate (kHz) 192 kHz
  Max. resolution in bit 24 bit
  USB Bus-Powered Yes
  Incl. power supply No
  USB Version 2.0
  Width in mm 200 mm
  Depth in mm 100 mm
  Height in mm 43 mm

• Connect plugKEY to your iOS device and a 5-pin DIN MIDI controller
• “Made for iPod/iPhone/iPad" certification obtained from Apple
• Two studio-quality 1/4" jack audio outputs
• 1/8" stereo headphone output
• Volume control
• Use while charging your iOS device
• Compact design can be taken anywhere
• Free apps that let you start immediately playing and producing music

• Connect plugKEY to your iOS device and a 5-pin DIN MIDI controller
• “Made for iPod/iPhone/iPad" certification obtained from Apple
• Two studio-quality 1/4" jack audio outputs
• 1/8" stereo headphone output
• Volume control
• Use while charging your iOS device
• Compact design can be taken anywhere
• Free apps that let you start immediately playing and producing music

Devices: iPad and iPhone 4
iOS version: 4.3 and later

Connection: Dock connector port (no batteries required)

*Software: Made for GarageBand

Computer: Mac, with an Intel processor
Memory: 1 GB minimum of installed RAM, 2 GB recommended
Mac OS version: 10.6.4 or later
Connection: USB 2.0 Full Speed

Software: GarageBand, Logic Pro, MainStage or any Core Audio compatible application

• PureDIGITAL instrument connection delivers pristine sound quality

• Designed for electric guitar and bass

• No confusing setup, you can start recording in minutes

• Works with GarageBand on iPad and iPhone or with any Core Audio compatible application on a Mac

• Control knob allows easy input level adjustment

• Multicolor LED for status indication and input level monitoring

• Studio quality instrument preamp with up to 40dB of gain

• High quality locking output connects directly to iPad and iPhone or USB port on a Mac

• 44.1kHz, 24-bit analog-to-digital conversion

• Auto Soft Limit for optimal input level

• Powered by connection to iPad, iPhone or Mac

• Made in the U.S.A.

• JAM
• 0.5m cable for connection to iPad and iPhone
• 1m cable for connection to Mac
• Quick start guide
• Velcro strip