Content |
Specification
» Power : AC230V/AC240V,50Hz-60Hz
» Heater : 3,000 W
» Output : 40,000 cu.ft / min
» First Heat-up Time : 12 min
» Tank Capacity : 6 liter
» Fluid Consumption Rate : 5.3 min / liter (100% Output)
» Remote Included : W-1 Wireless Remote
» Optional Accessories : FW-500 Flight Case , W-515-HB Hanging Bracket
» Weight : 19 Kg
» Dimensions (mm) : L 581 W 278 H 186
» Wireless DMX is optional for both W-515 & W-530
» Liquid Used : Antari FLR / FLG Liquid |
Digital technology and a new Design
The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.
Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.
Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany
Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
110 V / 60 Hz
Warm up time approx. 7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
. 35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at
Control: DMX 512
0 ? 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg
|
Jem Air Force 1 Fan speed 0 – 2500 rpm 1600 cubic m/hr. Single channel DMX operation. Analogue link sockets. Floor standing or truss mounting. Low voltage multifunctional Remote control. Sealed fan motor. Converts smoke to haze, Wind effects. Projects smoke down long lengths of ducting. Keeps equipment cool: Amp racks, Dimmer racks.
|
JEM Air Force 2, The AF-2 is a high output fully DMX (3 + 5 pin) controllable fan. It has been designed with theme parks, stage applications and theatres in mind. With its massive power it easily projects smoke over long distances, works as a wind effect or simply converts smoke or fog into haze. Very high output, Fan speed 0 - 1,380rpm, Airflow: 6,500m³/h, Fan casing constructed from aluminum sheet for minimal weight, only 17kg!, 3 & 5 pin DMX as standard, Multifunctional controller, Very high quality sealed fan motor designed to withstand high condensation levels associated with close proximity fog, Aluminum hanging bracket allowing 360° rotation, compatible with the Omega clamp system.
|
Power: AC 240V, 50 Hz
Output: 18.000 cu. ft/min (509 m³/min)
Tank Capacity: 2,5 L
Fluid type: Fog Fluid
Fluid Consumption Rate: 44 Min/L(100% Output)
DMX: Yes
Heater: 1200W
Weight: 10,9 kg
Dimensions (LxWxH): 458 x 243 x 177 mm
Accessories/ordering info:
Remote: Z-8 (included)
Cable Length: 10M
Connector DMX: 3 Pin XLR in-out
Connector remote: 6,3 mm Stereo Jack
Functions: timer with interval, duration
and volume;
Continuous fogging; manual on/off
Compatible With: Z-1200II, ICE-101, LCU-1
Optional:
Z-9 Wireless Remote: Ordercode: 60698 |
DMX ADAPTOR FOR FOG MACHINES
|
Reviews
There are no reviews yet.