Content | The famous BIAMP MASK Series, a standard in the fixed install audio industry for many years, has been expanded with a MASK12 cabinet loudspeaker. This new 12” two-way high power cabinet loudspeaker is very easy to install and can be used in many full range indoor applications where a medium to high sound pressure level is required. Think of bars, pubs or sports cafeterias where background music is played during the day but where in the evenings more powerful foreground music is needed. Next to that the MASK12 is also perfectly suited for fitness centres, sport halls or multipurpose rooms where the music needs to be cranked up during sports lessons or events.
The special shape of MASK12 allows easy installation close to the ceiling or at the wall in a horizontal or vertical position. Mounted vertically MASK12, has a nominal dispersion angle of 90°H x 70°V. When mounted horizontally, you can rotate the high frequency horn by 90° to keep the same horizontal dispersion angle. It doesnʼt matter how you mount the loudspeaker as |
Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black This item is BLACK. The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil. The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker. • 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications • High output, 131dB SPL capacity • Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor • 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil • Rugged, high-tech polypropylene enclosure • 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B
Active or Passive |
Passive |
Frequency Response |
-10dB:48-20,000Hz |
Power Capacity |
600W |
Maximum Sound Pressure Level (SPL) |
131dB |
Nominal Sensitivity |
97dB |
Impedance |
8 Ohms |
Crossover |
2KHz |
Low Frequency Driver |
DVX3121, 12" (305mm) Driver |
High Frequency Driver |
ND2, 1" (25.4mm) exit Neodymium |
Enclosure Material |
Polypropylene Structural Foam |
Input Connections |
Neutrik Speakon NL4\'s x 2 |
Mounting Options |
Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure |
Dimensions |
24.14 x 15.64 x 14.26" (613 x 397 x 362mm) |
Weight |
43.7 lbs (19.8 kg) |
|
The DYNACORD VL212 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL212 is ideally suited to be used in most demanding applications. The VL212 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies two rugged DND 12350 transducers are used. The in-line topology guarantees excellent pattern control even for the low-mid frequency range. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL212 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations. The VL212 can be used as a general purpose stand-alone fullrange cabinet and as a satellite or delayed system cabinet in larger set ups.
Order No. D 113 133 Cabinet Full-Range Configuration Passive 2-Way Switchable to biamped mode Nominal impedance 4 Ohms Rated power RMS 800 Watts Program power 1600 Watts Peak power 3200 Watts SPL 2,83 V / 1m 2W / 4 Ohm 105 dB Max. SPL 1m (calculated with peak power) 137dB Frequency range ( -10dB ) Full range 80Hz - 19kHz Frequency range ( -10dB ) measured with H5000-RCM26 preset 50Hz - 19kHz Coverage angle 1 kHz -6dB 90° * 45° Passive crossover frequency 1.5kHz Active crossover frequency 1.5kHz 24dB/Oct. Linkwitz-Riley, 1,5kHz Linear-Phase FIR Voice coil tracking protection Yes Component HIGH Electro-Voice ND6-8 Neodymium Order No. 361493 Component LOW 2 x DND 12350 Order No. 366559 Connectors Full-Range 1+, 1- Wired through 2+, 2- Connectors Biamped Lo 1+, 1- Hi 2+, 2- Wired through 1+, 1-, 2+, 2- Connector model Speakon 2x NL4 MPR Dimensions (WxHxD) 385x1035x374mm Shipping weight kg Net weight 34kg Enclosure material Birch plywood Finish Black, 2-component paint Grille Powder coated steel, acoustic foam Handles 2
|
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, μαύρο χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. |
Chassis Size 304.8 mm (12“) Color Black Color White Directivity Index 11.1 dB Input Connections Four-pin Speakon (2) Speaker Type Fullrange Speaker Type Mid-High Speaker Type Two-Way Frequency Response (-10 dB) 50 - 20000 Hz Internal Crossover Yes Sensitivity 1 W/1 m 99 dB Max. SPL/1m (calc) 131 dB Coverage (Nominal -6 dB) H° 65 ° Coverage (Nominal -6 dB) V° 65 ° System Power Handling (Continuous/Program/Peak) 300 Watts LF Transducer DL12BFH HF Transducer DH2010 Crossover Frequency 1500 Hz Nominal Impedance (Passive) 8 Ω Minimum Impedance 6 Ω Flying Yes Outdoor No Height 586 mm (23.07“) Width 429 mm (16.89“) Depth 312 mm (12.28“) Weight Net 14.5 kg (31.97 lbs) |
The Rx-112/75 is a 12-inch two-way, full-range loudspeaker system with 350 watts continuous, 1,200 watts peak power handling. Can be easily biamped DH7 3-inch voice coil compression driver delivers beautifully detailed sound Asymmetrical 75° x 50° fully rotatable constant-directivity horn. In the factory-delivered position, the horn provides a 15°up/35° down vertical coverage pattern. The fully rotatable horn means that regardless of cabinet position, pattern control is fully user-determined. |
Reviews
There are no reviews yet.