| Content | The BIAMP MDS microphone discussion system is a highly flexible small to medium size tabletop discussion system. This easy to set up and to easy to use audio system is the perfect solution for meeting rooms, board rooms and medium conference rooms. This discussion system consists of a chairman unit (MDS.CHAIR) and up to 19 delegate units (MDS.DEL). The connection interface (MDS.INT) is located at the beginning of the microphone chain.
This MDS system has a unique circuit loop design with an easy set-up using standard CAT5 cables for linking up to 20 units in a daisy chain (every microphone and switching adaptor can be located anywhere in the loop). When the chairman presses the mute button, only the chairman unit will be active and all delegates will be muted and deactivated. The delegates can press a button to talk into the flexible gooseneck microphone (no mute function).
The MDS.INT easily connects to any pre-amplifier or matrix with a MIC input with wide gain control (about +20dB of gain needed), allowing you to control the volume and/or use the record output for recording the meeting. Combined with the CMX20T ceiling speakers or MASK4 cabinet loudspeakers, you will have an astonishing voice clarity! |
Rugged infrared receiver for up to seven selectable channels, for use with headphones, e.g., AKG K 77. Operates for more than 12 hours per battery charge.
The CS 5 IRR7 shall reproduce the floor channel and 6 translated languages. It shall have a 3,5mm stereo jack to connect any stereo headphone, a volume potentiometer and an easy selector switch. It shall have a built in NiMh rechargeable battery to supply the unit for up to 13 hours operation time. The unit shall switch off automatically when loosing the signal to save power. It shall be rechargeable with charging contacts on the housing.
|
- System Features and Outline
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATION:
| Power Source | 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory)) | | Power Consumption | 72W | | Input | MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack | | Output | REC: -20 dB＊, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack | | Number of Connectable Chairman/Delegate Units | 64 units | | Number of Connectable Infrared Transmitter/Receiver Units | 4 units (up to 16 units by using four Distributors) | | Infrared Transmitter/Receiver I/O Terminal | 4 BNC jacks | | External Control Terminal | D-sub connector (9 P, male) | | LED Indicator | Audio signal receiving indicators 1-4 CH,Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge) | | Function Switch | Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) | | Operating Temperature | 0º to＋40º | | Finish | Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss | | Weight | 2.7kg | | Accessory | AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1 | | Option | Rack mounting bracket: MB-TS900 | | | ＊0dB=1V |
|
- System Features and Outline
- Bilingual conference system. Either English interpretation (main audio) or Japanese interpretation (sub audio) is selectable for monitoring.
- Operations such as giving speech permission can be done from the operation PC. *Custom design.
- The number of conference units can be set for any of one, two or four persons allowed to talk at a time.
- All speeches during the conference can be recorded clearly.
- Sub audio(Japanese interpretation) is not recorded.
- Threefold choice vote function enables the voting just at the press of a Vote key on each unit. The result can be instantly totalized on the Central unit.
- Speeches can be addressed to audience via sound amplification. * The sub audio output is not amplified
SPECIFICATIONS:
| Power Source | 100-240 V AC, 50/60Hz (supplied from AC adapter (accessory)) | | Power Consumption | 72W | | Input | MIC: -60 dB*, 600O,unbalanced, phone jackAUX: -20 dB*, 10 kO,unbalanced, phone jack | | Output | REC: -20 dB＊, 10 kΩ, unbalanced, phone jack, RCA pin jack HEADPHONE: Mini jack | | Number of Connectable Chairman/Delegate Units | 64 units | | Number of Connectable Infrared Transmitter/Receiver Units | 4 units (up to 16 units by using four Distributors) | | Infrared Transmitter/Receiver I/O Terminal | 4 BNC jacks | | External Control Terminal | D-sub connector (9 P, male) | | LED Indicator | Voting result indicators 1-3 (7-segment LED, double-digit number), Audio signal receiving indicators 1-4 CH, Data signal receiving indicator, External control priority indicator, External control communication indicator, Power indicator, Battery indicator (flashes when a Chairman/Delegate unit's battery nears complete discharge) | | Function Switch | Simultaneous speaker No. setting switch: 1/2/4 Mic-off setting switch: TIME OUT ON/OFF
Speech priority selector switch: A/B/C (A: First-in-first-out priority, B: Last-in-first-out priority, C: Fixed for the first unit, and last-in-first-out for the subsequent units) | | Microphone Mix/Cut Switch (for the Base Language) | MIC/CUT (Mix): Chairman/Delegate units ＋ MIC 1＋ AUX 1 ＋AUX 3 → Base Language (Cut): MIC 1 ＋ AUX 1 ＋ AUX 3→ Base Language | | Microphone Mix/Cut Switch (for the Translation Language) | MIC/CUT (Mix): Chairman/Delegate units ＋ MIC 2 ＋ AUX 2 ＋ AUX 3 → Translation Language (Cut): MIC 2 ＋ AUX 2 ＋ AUX 3→Translation Language | | AUX 3 Mixing Select Switch | MIC/CUT (Mix): AUX 3 input is relayed to the line output. (Cut): AUX 3 input is not relayed to the line output. | | Operating Temperature | 0º to＋40º | | Finish | Panel: Surface-treated steel plate, gray metallic, paint, semi-gloss | | Weight | 2.7kg | | Accessory | AC adapter (Cord length: 1.8 m DC cord, and 2 m detachable AC cord)…1 | | Option | Rack mounting bracket: MB-TS900 | | | ＊0dB=1V |
|
- Digital controller for any size systems
- Ease of use
- Complete with all inputs and outputs needed for complex systems
- Integrated infrared signal output
- Free basic control software included
The CS 5 BU ensures easy, user-friendly control of everything from a small discussion setup to a large conference system. The Base Unit provides all the inputs and outputs needed to manage a complex audio system. It controls 64 audio channels that can be individually programmed and assigned to interpretation channels or NOM limitation.
To ensure maximum reliability, all microphone stations and interpreter stations are „daisy-chained" together and connected back to the Base Unit, forming a closedcircuit digital audio bus. Thus, the entire system will continue operating perfectly, with no interruption, even if one of the bus cables breaks.
To power the system, a CS 5 PS 12 power supply is connected to every twelfth microphone station, ensuring consistent signal levels. Unlike competitive techniques, AKGʼs approach to keeping consistent signal levels throughout the system is uncommonly cost efficient. Every CS 5 Conference System comes complete with a FREE basic control software package so the entire system can be controlled from a computer from day one.
The Base unit shall operate up to 5000 units. As analogue inputs the base unit shall handle an external microphone for easy translating to be routed to channel 1, an ordinary external microphone, telephone in and out with mix minus sum, tape in and out and Line in and out. The infrared modulation shall be included in the base unit, providing the relevant infrared signal on two BNC connectors. Also included in the base unit shall be a USB connector to connect to a PC. A basic software package for participants database, voting and other basic functions shall be included. The unit shall be 1 HU 19” wide in a rack mount housing. A serial port shall be available to enable AMX control.
| |
Reviews
There are no reviews yet.