| Content | The SUBLIME is an ultra compact passive 6.5' dual coil subwoofer that offers the ultimate blend of a compact size and deep, fat basses. Thanks to the built-in X-over, this subwoofer is the ideal partner for the MASK2 top speakers.
This thinnest subwoofer on the market (only 12 cm deep) allows for easy integration into any interior: on the wall (mounted with the included wall mounting brackets), behind curtains or even under furniture.Speaker and connection terminals are invisible when mounted on the wall using the included mounting brackets. It may look like a small heating radiator, but instead of heat, it will radiate musical vibes in your room.
The SUBLIME subwoofer has a built-in stereo X-over filter, thus eliminating the need for external filters. The X-over filter separates the high frequencies and sends them directly to the top speakers. Optionally, you can use the SUBLIME speaker in an active speaker setup, using an active filter and separate power amplifier. You can use the SUBLIME up to 200 Hz. |
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
|
The SR-A18B is a sub-woofer system designed to be used in conjunction with the SR-A12L or SR-A12S Line array speaker. The SR-A18B employs the multi-amplifier drive system and is designed to be used in conjunction with the optional DP-0206 Digital Processor.
| Enclosure | Bass-reflex type | | Power Handling Capacity | Continuous program: 720 W | | Rated Impedance | 8 Ω | | Sensitivity | 95 dB (1 W, 1 m) | | Frequency Response | 40 - 400 Hz (when using DP-0206 (option)) | | Crossover Frequency | 80 Hz (when using DP-0206 (option)) | | Speaker Component | 46 cm cone-type | | Input Connector | M5 screw terminal, distance between barriers: 12.2 mm
and Neutrik NL4MP × 2 | | Finish | Enclosure: Plywood, black, paint
Front grille: Punched steel plate, black, acrylic paint | | Dimensions | 740 (W) × 573 (H) × 698 (D) mm | | Weight | 66 kg (including accessories) | | Accessory | Joint plate …2, Joint plate mounting bolt (M10) …16 | | Option | Rigging frame: SR-RF12
Digital processor: DP-0206 |
|
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
| Features |
|---|
| Compact, arrayable, 2 x 12" bandpass subwoofer system | | 131 dB max SPL, 800 Watt AES | | Equipped with RCF high power 2 x12“, 3" voice coil woofers | | Extensive internal bracing, 8 x M10 mounting points | | Recessed handles | | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | | Epoxy powder coated front grille | | Dedicated to permanent installation |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | | Max SPL @ 1m: | 131 dB | | | System Sensitivity: | 97 dB | | | Nominal Impedance: | 4 Ω | | | Power Handling: | 800 Watt | | | Peak Power Handling: | 2400 Watt | | | Recommended Amplifier: | 1600 | |
| TRANSDUCERS |
|---|
| Woofer: | 2 X 12" woofer, 3" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 400 Watts AES | | | Sensitivity: | 97 dB | |
| INPUT SECTION |
|---|
| Input connector: | 2 x Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Hardware: | 8 x m10 mounting points, 2 x recessed | | | Handles: | 2 seitlich | | | Grille: | Custom perforated steel grille | | | Colour: | Black, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 500 / 19.68 mm/inch | | | Width: | 650 / 25.59 mm/inch | | | Depth: | 580 / 22.83 mm/inch | | | Net Weight: | 38 / 83.77 Kg/Lbs |
|
The S8028 is a compact, high-output bass reflex subwoofer for high output applications and large installations.
The system is equipped with two advanced neodymium 18” RCF precision woofers mounted in a clam-shell configuration. The two transducers couple to achieve tight and maximised output. Each 18” features massive vented neodymium magnets and 4” copper voice coil. The system is capable of producing a Max SPL of 138 dB and handles 2000 Watts AES.
| Features |
|---|
| Compact, bass reflex, 2 x 18" subwoofer system | | Very high output, response down to 35 Hz | | 138 dB max SPL, 2000 Watt AES | | Equipped with RCF high power 2 x18“, 4" voice coil neodymium woofers | | Recessed handles | | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | | Epoxy powder coated front grille |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 35 Hz | ÷ 0.2 kHz | | Max SPL @ 1m: | 138 dB | | | System Sensitivity: | 99 dB | | | Nominal Impedance: | 4 Ω | | | Power Handling: | 2000 Watt | | | Peak Power Handling: | 8000 Watt | | | Recommended Amplifier: | 4000 | | | Crossover frequencies: | Recommended 120 Hz | |
| TRANSDUCERS |
|---|
| Woofer: | 2 X 18" woofer, 4" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 900 Watts AES | | | Sensitivity: | 98 dB | |
| INPUT SECTION |
|---|
| Input connector: | 2 x Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 580 / 22.83 mm/inch | | | Width: | 1060 / 41.73 mm/inch | | | Depth: | 700 / 27.55 mm/inch | | | Net Weight: | 64 / 141 Kg/Lbs |
|
Ηχείο SUB με 1 x 18 LF 2242H SVG driver. 800W/8Ω. 35Hz-1kHz ±3dB. Αrrays με AM6200 και AM4200 δορυφόρους χρησιμοποιώντας paf-3k planar array frame kit με AC2212. (548H x 561W x 816D mm). 44,5kg. |
Reviews
There are no reviews yet.