ART PHANTOM II 48V PHANTOM POWER SUPPLY

Phantom III - 48V Phantom Power Supply Overview

Different condenser microphones specify different amounts of required phantom power.
 As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately,
there is some flexibility in terms of matching phantom voltage to your mic. A rough rule
of thumb would be ?more is better.?
For example, a 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated
at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer
first. Conversely, a mic will generally perform best driven by not less than its rated voltage
so, for a 48V mic, you would obtain best results with 48 volts of phantom power. The
Phantom III is a great choice for the above needs.

Phantom III - 48V Phantom Power Supply Specifications:

Input Connectors XLR female
Output Connectors XLR male
Frequency Response 10Hz ? 25kHz
Output Phantom Power 48V DC +/- 2V
Output Noise -115 dBV
Current Drain 14mA
Power 18V AC (Adapter included)
Dimensions 5.25x2.75x1.75 inches (130mm x 74mm x 45mm)
Weight 1.3 lbs. (315g)
 

• 12 V / 48 V switchable
• 2 XLR inputs
• 2 XLR outputs
• Operating voltage: 12 V / 150 mA (via enclosed power supply unit) or 2x 9 V batteries
• Dimensions: 143 x 93 x 45 mm
• Weight: 485 g

Shure RK-183 Phantom Preamplifier for MX183-184-185

Palmer Pan 48 is a unit for the external power supply of phantom powered appliances. Due to the high current level of a maximum of 20mA, the application is not just limited to condenser microphones. PAN 48 is excellent for supplying phantom powered active DI-boxes. The box has two channels. Specifications: 2 channels, each channel: Microphone input: XLR/f Pin 2 & 3 +48VDC, Pin 1 Ground Output: XLR/m no DC voltage Ground lift switch Phantom power stabilized ±5%. Low ripple, low noise Max. current 20mA totally. LED control. Metal casing 110x110x45mm

The AKG MPA V L Phantom power adapter with XLR connector for L type MicroMic microphones with integrated bass roll-off switch. This product replaces the AKG MPA III L Phantom Power Adapter, which did not have a bass roll-off switch.

• 2 channels
• 2 XLR inputs
• 2 XLR outputs
• Switch for +12 V or +48 V
• Including power supply