| Content |
Phantom III - 48V Phantom Power Supply Overview
Different condenser microphones specify different amounts of required phantom power.
As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately,
there is some flexibility in terms of matching phantom voltage to your mic. A rough rule
of thumb would be ?more is better.?
For example, a 24-volt condenser mic will run perfectly on 48 volts. In fact, mics rated
at as little as 9 volts can often operate on 48 volts, but you should check with the manufacturer
first. Conversely, a mic will generally perform best driven by not less than its rated voltage
so, for a 48V mic, you would obtain best results with 48 volts of phantom power. The
Phantom III is a great choice for the above needs.
Phantom III - 48V Phantom Power Supply Specifications:
Input Connectors XLR female
Output Connectors XLR male
Frequency Response 10Hz ? 25kHz
Output Phantom Power 48V DC +/- 2V
Output Noise -115 dBV
Current Drain 14mA
Power 18V AC (Adapter included)
Dimensions 5.25x2.75x1.75 inches (130mm x 74mm x 45mm)
Weight 1.3 lbs. (315g)
| Specifications
1. Output Voltage : DC48v
2. Consumption : <=1W
3. Noise : <1μV
4. Input : XLR (balanced)
5. Output: XLR (balanced) |
The K6P powering module is at the heart of Sennheiser's professional modular
condenser microphone system. It is similar to the K6 powering module but is
powered by 12 - 48 V phantom power only, for use where battery power is not
required (e.g. permanent installations). The K6P can be combined with various
microphone heads to produce microphones with a variety of pick-up patterns.
Matt black, anodised, scratch-resistant finish.
Profile
Powering module for phantom powering with switch-able roll-off filter suitable for
ME 62 - ME 67 microphone heads and -60 versions of MKE microphones,
transmission factor 0 dB at 1 kHz, nominal impedance 200 Ohm, min. terminating
impedance 1 kOhm, max. output voltage 2 V (at 1 kHz), phantom powering 12 V - 48 V,
supply current 2.2 mA, dimensions in mm: ? 22 x 118, resultant length 52 mm,
weight approx. 30 g.
Features
Switchable bass roll-off filter protects against rumble, handling, pop and wind noise
On/off switch
High output, low noise
Transformerless balanced output on 3-pin XLR connector
Delivery Includes
1 K6P powering module
1 MZQ 200 microphone clamp
1 protective carrying case
Technical Data
Nominal impedance 200 Ohm, symm.
Min. terminating impedance 1000 Ohm
Output voltage 2 V (1 kHz)
Power supply Phantom 12 - 48 V
Current consumption 2,2 mA
Dimensions d 22 x 52 mm (netto)
Gain 0 dB
|
The Radial SB-48 is a high performance phantom power generator that employs a non-radiating charge pump circuit to create a stable, ripple-free 48 volt supply for active direct boxes and condenser microphones. The stereo design features XLR inputs and outputs with a choice of 48V and 12V operation. The SB-48 is powered by a single 15VDC 400 milliamp supply that is included. The connector may be locked into place using a retention clamp. As with all Radial products, the SB-48 is manufactured in Canada from solid steel and powder coated for years of great looks! |
- Universal phantom power supply for any condenser microphone
- Selectable +12 / +48 V power supply
- Ultra-low noise audio performance
- DC 12 V adapter included
- 3-Year Warranty Program*
- Designed and engineered in Germany
Studio-grade condenser microphones really sound great for capturing vocals, drums and other acoustic instruments, but what if your mixer doesnʼt provide the phantom power you need to make them work their magic! The ultra-compact MICROPOWER PS400 can solve all of that, and it's small enough to fit in your pocket – with a price tag to match!
The PS400 features XLR Thru jacks and provides superb noise-free operation. Just connect your condenser mic to the Mic Input and send a line from the Mic Thru to your mixer. You can toggle between +12 V and +48 V power, depending on the operating voltage your mic prefers. This handy, little audio solution comes with its own 12 V DC power supply and an LED, to let you know when itʼs own on.
With its small size and even smaller price tag, the MICROPOWER PS400 is the perfect solution for on-the-go +12 or +48 V phantom power. See how it complements your favorite mic and mixer at your nearest BEHRINGER dealer, or get yours online today! | Phantom Power Adapter 48V
Mini XLR Male 3 pins > XLR male
Type
Phantom power adapter
Input connector
Mini-XLR (3-pin)
Gender of input connector
male
Output connector
XLR (3-pin)
Gender of output connector
male
|
Reviews
There are no reviews yet.