ARTLIGHT AL900WHL Smoke machine 900W LED RGB, Wireless Controler

Installation and use:

-First, please open the lid and add high-quality oil (not included).
-Please make sure that there is misty liquid in the oil tank! If there is no misty liquid running within 1~2 minutes, the pump may be damaged due to overheating.
-Please use in accordance with the rated voltage.
-Set the wire or remote control.
-Then it will automatically preheat when it is turned on. The first preheating is about 8 minutes, and then it will be heated for 1-2 minutes during use.
-Then press the ON/OFF switch, and the smoke will come out.
-Please use high-quality mist liquid and clean the machine frequently to extend its service life.
-The temperature of the atomizing nozzle is very high when in use, please do not touch it, and keep a distance of one meter from non-combustible materials.

Package Included:
1x fog machine
1x power cord
1x remote control
1x handle
2x mounting screws
1x User Manual
1x box

MDG MAX 5000 HO APS Smoke Machine 2815W

Extremely powerful,adjustable fog output
Virtually noiseless, with the finest fog and the longest hanging times
Automatic Purging System (APS) to prevent build-up and clogging
Compatible with remote control timer and DMX interface
Detachable remote control and 8 m (26 ft) cable included

Powerful fog output (up to 85 m3/3,000 ft3 per minute)
Portability option

TECHNICAL DATA
MAX 5000APSH.O.
Maximum fog output 445 m3 (3,000 ft3)
per minute
Fluid consumption 4.5 L (34 oz)
per hour at 2.76 bar (40 psi)
Gas type N2 only
Gas consumption 5 kg (11 lb)
per hour at 2.76 bar (40 psi)
Reservoir capacity 6.5 L (0.66 US gallon)
Automatic Purging Standard feature
System (APS)
Fog colour Pure white
Particle size 0.5-0.7 microns
Warm-up time (maximum) 8 minutes
Fluid type MDG Neutral Fluid
(M.S.D.S. available on request)
Operating voltage 115 or 230 VAC,
50/60 Hz
Power consumption 2815 W
Dimensions Length 68.5 cm (24?)
Width 28 cm (7?)
Height 30 cm (12?)
Weight 33 kg (43 lb)
Shipping weight 44 kg (97 lb)
(with flight case)
Approval CE approved, CSA
and UL pending

The Roadie X-Stream blends fog and air to produce a variety of effects; from an optically translucent haze to an immensely dense "white-out" of fog.

    * Output and density level control
    * Continuous output
    * 5000 m³/min fog output
    * Integrated high velocity fan
    * 2 x 2500 W heat exchanger
    * 18 min heat-up time
    * For vertical or horizontal effect projection
    * 2 x 9.5 liter fluid capacity
    * Different fluid options for different applications
    * Low fluid sensing
    * Onboard DMX
    * On-board control panel
    * Optional hand-held remote control

51701986 Compact low fog machine (450 W), 1.2 liter tank, remote control, ice cube cooling

• Works with standard fog fluid and ice cubes
• Low fluid consumption rate
• Continuous activation
• Water drainage valve system allows for easy cleanup
• Temperature control via thermo switch
• Removable tank with level indication
• Rugged metal housing
• Short warm-up time
• Output distance: Approx. 2 m
• Controlling by wired remote control
• For application areas such as: Halloween; theater

Package contents

• 1 x device, 1 x user manual, 1 x container, 1 x filter

Digital technology and a new Design

The viper nt originate from the continued development and improvement of the Viper fog machine.
It unites the current digital technology with the proven technique and power of its predecessor.
New features guarantee a much more simple operation ? place and fog, reducing the amount of
time needed to set up the machine.

Features
? Control panel
The control panel with LED-display, simple symbols allow for easy operation. It also protects
the control buttons against dirt.
? Finest adjustments of the output
Digital technology makes fine adjustment of the pump possible. In steps of 1% the output can
be adjusted from 0 - 99%. Thus, any desired effect from a tiny fog-cloud to the thickest fog can
be produced. This enables the viper nt to be used in both small and large locations.
? DMX 512 as standard
The viper nt can be controlled via DMX 512. The connection is done with 5pin-XLR-plugs.
The DMX start address can be adjusted and saved via the control panel.
The machine can also be controlled with analog (0 - 10 V) via a lighting desk or via XLR-remote
(option). This connection is done with 3pin-XLR-plugs.
A stand-alone-mode is also possible. The adjustments are done directly at the machine. A short
press at the start button makes the machine run. Therefore a permanent pressing of the start button
is unnecessary.
? Internal timer
With the internal timer the fog time can be exactly adjusted in seconds, the wait time in minutes
and the output in %.

Safety
The change of the design is not only cosmetic, it also has improved safety features.
The viper nt is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke complete with
a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper nt:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Advantages
? DMX as standard, analog and stand-alone-mode
? Internal timer 
? Fog output adjustable in steps of 1% (0 - 99%)
? Continuous output
? Easy handling
? Powerful output
? Made in Germany

Technical Data:
Procedure: vaporizing fog generator
Power requirement: 1300 Watt
Voltage: 230 V / 50 Hz
              110 V / 60 Hz
Warm up time approx.  7 min.
Fluid consumption
at max. output
at continuous output: 120 ml/min.
.                                   35 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection:max. 15 m
Fogging time at Control: DMX 512
             0 ? 10 V analog
             Stand-alone-Mode
             Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
                                       Pump/Thermal switch
Dimensions (L x W x H): 470 x 230 x 240 mm
Weight without bottle: approx. 8,3 kg

The ZR33 Hi-Mass is a powerful and instant atmosphere generator for large clubs, stage productions, rental companies and industrial applications.

    * Continuous output
    * 1000 m³/min fog output
    * 1500 W heat exchanger
    * 8 min heat-up time
    * Floor standing or truss mounting
    * 9.5 liter fluid capacity
    * Different fluid options for different applications
    * Low fluid sensing
    * Onboard DMX
    * On-board control panel
    * Removable panel for remote control
    * Multifunctional remote control