Content | Product Parameters
Power: 900W
Voltage: AC110-220V 50/60Hz
Control mode: wire control /wireless remote control
Warm-up time: 3 minutes
Oil smoke capacity: 1 liters
Fluid consumption(100% output): 5000Cuft/min
Smoke distance: 2-3 meters
Weight: 3kg
Size: 350*200*200mm
Installation and use:
-First, please open the lid and add high-quality oil (not included).
-Please make sure that there is misty liquid in the oil tank! If there is no misty liquid running within 1~2 minutes, the pump may be damaged due to overheating.
-Please use in accordance with the rated voltage.
-Set the wire or remote control.
-Then it will automatically preheat when it is turned on. The first preheating is about 8 minutes, and then it will be heated for 1-2 minutes during use.
-Then press the ON/OFF switch, and the smoke will come out.
-Please use high-quality mist liquid and clean the machine frequently to extend its service life.
-The temperature of the atomizing nozzle is very high when in use, please do not touch it, and keep a distance of one meter from non-combustible materials.
Package Included:
1x fog machine
1x power cord
1x remote control
1x handle
2x mounting screws
1x User Manual
1x box | 51701986 Compact low fog machine (450 W), 1.2 liter tank, remote control, ice cube cooling
- Works with standard fog fluid and ice cubes
- Low fluid consumption rate
- Continuous activation
- Water drainage valve system allows for easy cleanup
- Temperature control via thermo switch
- Removable tank with level indication
- Rugged metal housing
- Short warm-up time
- Output distance: Approx. 2 m
- Controlling by wired remote control
- For application areas such as: Halloween; theater
Package contents
- 1 x device, 1 x user manual, 1 x container, 1 x filter
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
420 W |
IP classification: |
IP20 |
Power connection: |
Fixed power supply cord with safety plug |
Warm-up time: |
Approx. 3 min |
Output distance: |
Approx. 2 m |
Tank capacity: |
1,2 l |
Fluid consumption: |
Approx. 12 ml/min |
Ice chamber: |
0,8 kg |
Control: |
Wired remote control |
Housing color: |
Black; silver |
Heater: |
400 W |
Dimensions: |
Width: 23,5 cm
Depth: 54 cm
Height: 24 cm |
Weight: |
5,00 kg |
|
Power: AC 240V, 50 Hz
Output: 18.000 cu. ft/min (509 m³/min)
Tank Capacity: 2,5 L
Fluid type: Fog Fluid
Fluid Consumption Rate: 44 Min/L(100% Output)
DMX: Yes
Heater: 1200W
Weight: 10,9 kg
Dimensions (LxWxH): 458 x 243 x 177 mm
Accessories/ordering info:
Remote: Z-8 (included)
Cable Length: 10M
Connector DMX: 3 Pin XLR in-out
Connector remote: 6,3 mm Stereo Jack
Functions: timer with interval, duration
and volume;
Continuous fogging; manual on/off
Compatible With: Z-1200II, ICE-101, LCU-1
Optional:
Z-9 Wireless Remote: Ordercode: 60698 | DMX-controlled smoke-machine
* Powerful smoke-machine for medium-sized discotheques or medium-sized stages
* Control via comfortable remote-control with LCD-display
* LED Fluidlevel-display
* Pump stops automatically when the fluid is depleted
* DMX-control via every standard DMX-controller
* Without mounting-bracket for standing installation
* Wide range of accessories available
SPECIFICATIONS:
Power supply: |
230 V AC, 50 Hz |
Power consumption: |
1500 W |
IP classification: |
IP20 |
Power connection: |
Fixed power supply cord with safety plug |
Warm-up time: |
Approx. 2 min |
Output volume: |
Approx. 430 m³/min |
Output distance: |
Approx. 3 m |
Tank capacity: |
2,3 l |
Fluid consumption: |
Approx. 30 ml/min |
DMX channels: |
1 |
DMX input: |
1 x 3-pin XLR (M) mounting version |
DMX output: |
1 x 3-pin XLR (F) mounting version |
Control: |
DMX; Wireless remote control; wired remote control |
Housing color: |
Silver |
Attachment system: |
Mounting bracket |
Carrier frequency: |
433,92 MHz |
Color: |
Silver |
Dimensions: |
Width: 27,5 cm
Depth: 40 cm
Height: 28 cm |
Weight: |
6,00 kg |
Remote control |
Cable length: |
3 m |
Battery: |
1 x 12 V 23AE alkaline manganese built-in |
|
The cutting-edge wireless control system gives Antari W series a simple setting and operation interface. Additionally, the state-of-the-art heater design upgrades the W Series fog machines to a higher level in terms of good quality fog and energy efficiency. In conclusion, Antari W Series bring users to a professional scene in an easier method. Main Features: 1. Intelligent Wireless Control System Each machine comes with a set of wireless receiver and transmitter as standard controller. The working distance of wireless control is 50 meters in open area. 2. Opto-electronic Fluid Sensor When the fluid recipient runs dry,the fluid sensor stops pumping automatically to protect pump from burning. 3. More Efficient New Heat Exchanger Design It can generate drier fog with smaller particles.This leads to a fairly low fog fluid consumption.Compare to the equivalent power consumption heat exchangers, the same quantity of fog fluid in W series can produce 20% more fog than others. 4. New Advanced PCB (Printed Circuit Board) Design The new system can control temperature precisely and rule out the influence from outside environments as much as possible to make W series fog machines be able to work stably between - 20 and + 60 degree Celsius.
Specification
» Power : AC100V/AC120V/AC230V/AC240V,50Hz-60Hz » Heater : 800 W » Output : 3,000 cu.ft / min » First Heat-up Time : 100 seconds » Tank Capacity : 0.8 liter » Fluid Consumption Rate : 60 min / 0.8liter (100% Output) » Remote Included : W-1 Wireless Remote » Weight : 3.8 Kg » Dimensions (mm) : L 315 W 128 H 166 » Liquid Used : Antari FLR / FLG Liquid
| Digital technology and a new Design
The viper 2.6 is a very powerful fog generator. It unites the current digital technology with proven technique and power.
Very powerful output, simple handling and the possibility to connect an external fan are the main new features of this machine.
Features:
- Finest adjustments of the output Digital technology enables fine adjustments of the pump. In steps of 1% the output can be adjusted from 0 - 99%. Thus, any desired effect - from a tiny fog cloud to the thickest continuous fog - can be produced. This allows an individual adaptation to the dimensions of the room. The fan can be adjusted separately from 0 - 99% .
- DMX 512 as standard
The Viper 2.6 can be controlled via DMX 512. Pump and fan can here be controlled separately. Thus, the connected fan can be used as wind machine as well. The connection is done with 5pin-XLR-plugs, two following addresses will be taken. The DMX start address can be adjusted and saved via the control panel. The address remains saved also when the machine is unplugged. The machine can also be controlled with analog (0 - 10V) via a lighting desk or a XLR-remote (option). The adjustment of the fan is done directly at the machine, the pump can be adjusted via the analog control. The connection is done with 3-pin-XLR-plug. A Stand-Alone-Mode is possible as well. The adjustments of the pump and the fan are done directly at the machine. Pressing the start button once, the machine starts running with the pre-adjusted levels.
With the internal timer, the fogging time can be adjsted in seconds, the wait time in minutes and the output in %. Once the timer is activated, the adjusted program will run until the timer is deactivated.
The control panel with LED display and simple symbols allow an easy operation. It also protects the control buttons against dirt.
- Robust flightcase version
The flightcase on wheels protect the inbuild machine and fan and ensures an easy transport and flexible handling. Handles at both sides of the case allow an easy lifting. Removable lids enable direct access to control panels and fluid tank.
Liquid
The following Look fog liquids are available for the Viper 2.6/Viper deLuxe: Quick-Fog (thick, quick disappearing fog liquid) Regular-Fog (thick, long lasting fog liquid) Slow-Fog (thick, extremely long lasting fog liquid)
Safety
The viper 2.6 is equipped with new safety features.
On the front and the back part of the cover there are fixing points for safety bonds.
At both sides of the bottom of the machine are three holes to which a hanging yoke
complete with a collecting tray for fluid drips can be fixed.
Fluid
The following Look-fluids are available for the viper 2.6:
Quick-Fog (thick, quick disappearing fluid)
Regular-Fog (thick, long lasting fluid)
Slow-Fog (thick, extremly long lasting fluid)
Technical Data
Procedure: vaporizing fog generator
Power requirement: 2600 Watt
Voltage: 230 V / 50 Hz
Warm up time: approx. 7 min.
Fluid consumption at max. output
at continuous output: 240 ml/min.
70 ml/min.
Fluid tank capacity: 5 liter
Fog output: adjustable in 99 steps
Output projection: max. 15 m
Fogging time at
external Fan: max. 800 Watt
Air quantity adjustable in 99 steps
Control: DMX 512
0 - 10 V analog
Stand-alone-Mode
Radio remote (Option)
Temperature control: Microprocessor controlled
Overheating protection: Heater block/Thermostat
Pump/Thermal switch
Dimensions (L x W x H): 520 x 230 x 250 mm
Weight without bottle: approx. 12 kg |
Reviews
There are no reviews yet.