| Content |
• Simply & Professional appearance for BNC cabling
• Easier for camera installation, save time and more securer cable connection
• Better quality termination
• No electrical tap, No splicing, no crimping, but only a small screw driver
• Material: Copper Pin and Zinc Alloy Body
| Impedance |
50Ω,75Ω |
Frequency range |
0~2GHz |
| Resistanc |
Inner conductor ≤2.0mΩ |
External resistance |
≤0.2mΩ |
| Insulation Resistance |
≥5000MΩ |
Medium pressure |
1500V |
| Durability |
500 times |
Center Pin |
zinc alloy |
| Materials |
zinc alloy |
Frequency response |
DC to 8 MHz |
| Attenuation |
0.5dB typ |
Humidity |
0 to 95% |
| Storage |
-30°C to +70°C |
Material |
ABS Zinc |
| Wire Type |
coaxial cable |
Center Contact |
≤ 1.5 ohm |
| DC Loop Resistance |
52 ohms per 1,000 ft |
Environmental |
-10°C to +70°C |
| Withstand Voltage |
1500V rms |
|
|
| Outer Contact: |
≤ 1 ohm |
|
|
|
Grounded BNC chassis connector, feedthrough in nickel D-shape housing Neutrik\'s BNC chassis connectors offer a true 75 Ω design for serial and digital (HD) signals. The machined brass connector body provides an extremely rugged and non-abrasive connection over long term use and is in addition recessed and therefore well protected in a D-shape housing (audio industry standard). Features & Benefits - Gold plated cage type center contact
- True 75 Ω design meets the stringent HD requirements
- Grounded panel mount
- Standard D-shape housing - provides flush mounting and protection from demage
- Color coding possible
|
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer
in harsh demanding environments by offering a cable carrier and receptacle
that helps to protect the contacts of the RJ45 connections. Designed to
protect the fragile latch and cover of standard RJ45 connectors from breakage,
you will find uses for this connector system in Ethernet networking of audio,
commercial, entertainment, stage production, DMX lighting, industrial and
outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female
receptacles. The cable end offers a robust diecast shell as a carrier for pre-
assembled RJ45 plugs. Female chassis connectors are based on the current
Neutrik "A" series as well the "D" series of XLR receptacles with secure latching
system - a feature not found on other RJ45 receptacles. Termination is offered
in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products
comply with Category 5 shielded or unshielded and are compatible for use with
10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC Krone
terminals, "D" style ? Mfg. #NE8FDV-YK |
BNC Plug 75 Ohm
for 6 mm cable
SpecificationsBNC Plug
Soldering type
Fits 6mm cable
Metal plug
Gold plated contacts
|
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer
in harsh demanding environments by offering a cable carrier and receptacle
that helps to protect the contacts of the RJ45 connections. Designed to
protect the fragile latch and cover of standard RJ45 connectors from breakage,
you will find uses for this connector system in Ethernet networking of audio,
commercial, entertainment, stage production, DMX lighting, industrial and
outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female
receptacles. The cable end offers a robust diecast shell as a carrier for pre-
assembled RJ45 plugs. Female chassis connectors are based on the current
Neutrik "A" series as well the "D" series of XLR receptacles with secure latching
system - a feature not found on other RJ45 receptacles. Termination is offered
in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products
comply with Category 5 shielded or unshielded and are compatible for use with
10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC 110
terminals, "A" style ? Mfg. #NE8FAV-Y110 | Neutrik introduces BNC 75W cable connectors in push-pull and rear-twist versions.
Featuring a true 75W design that meets the stringent requirements of HDTV/DVD,
these connectors sustain consistent impedance at high frequencies up to 3 GHz,
are easy to handle in high density applications such as video patchbays and switchers,
show excellent return loss and VSWR, consist of machined parts that are precisely
made to our high standards and offer a center pin assembly with a snug fit to provide
tactile indication when the contact is snapped into position.
Push-Pull BNC Cable Connector
* Unique push-pull locking system is ideal for ultra high-density applications, patching, etc.
* Assembly is fast and easy a requires only a standard center contact crimp (.063“/1.60 mm)
after cable prep
* Use of a standard crimp size eliminates the need for different crimp dies and facilitates
field repair
* Innovative screw lock cable retention with the jacket providing superior pull strength
* Standard color is black, optional colored boots available
* For use with cable types: Belden 1694A, Commscope 5765, ELF Inc. Cable, Eupen 705
CRT 5V-HS, Gepco VSD2001, Nokia/Draka 1.0/4.8 AF, Suhner S05133-07, Suhner S05163-02 |
Reviews
There are no reviews yet.