Content | Replacement stylus for Shure cartridges M44-7 , M44 MB and more.
High Quality aftermarket replacement stylus Shure N44-7
Specs:
Spherical Diamond bonded Tip 0.7mil
Tracking Force: 1,5 – 3.0 grams
16 or 33 or 45rpm NOT for 78rpm
Stylus Color: White
Swiss Made
Fits the following models:
Dual DN 305, Shure N 44C, N 44G, N 44-7, N 55 E, Pfeifer 10472, Pfeifer 10473,
Please check the picture against the stylus you have or get in touch if you need advice.
| Stylus 305
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-18.000 Hz + 2 / - 3 dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
spherical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,5-2,0 g (12,5-20 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Grey |
|
|
Recommended for following cartridges |
Series 305 Universal |
*) Typical value | Ortofon 510MKII Stylus Technical Data
- Frequency range20-23.000 Hz
- Frequency response20-20.000 Hz + 2 / - 3 dB
- Tracking ability at 315Hz at recommended tracking force70 µm
- Compliance, dynamic, lateral25 µm/mN
- Stylus typeElliptical
- Stylus tip radiusr/R 8/18 µm
- Equivalent stylus tip mass0,3 mg
- Tracking force range1,25-1,75 g (12,5-17,5 mN)
- Tracking force, recommended1,5 g (15 mN)
- Tracking angle20°
- Stylus colourBlack
- Recommended for following cartridgesSeries 510 Mkll, 510, 510 P
|
|
Stylus 40
Technical data |
| Frequency range | 20-30.000 Hz | Frequency response | 20-30.000 Hz + 2 / - 3 dB | Tracking ability at 315Hz at recommended tracking force *) | 90 µm | Compliance, dynamic, lateral | 25 µm/mN | Stylus type | Nude FG 70 | Stylus tip radius | r/R 5/70 µm | Equivalent stylus tip mass | 0,3 mg | Tracking force range | 1,25-1,75 g (12,5-17,5 mN) | Tracking force, recommended | 1,5 g (15 mN) | Tracking angle | 20° | Stylus colour | Black |
| | Recommended for following cartridges | OM 40, OM 40 GOLD | *) Typical value | Stylus 2M Black
Technical data |
|
Frequency range |
20-31.000 Hz |
Frequency response |
20-20.000 Hz + 2 / - 0 dB |
Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
Compliance, dynamic, lateral |
22 µm/mN |
Stylus type |
Nude Shibata |
Stylus tip radius |
r/R 6/50 µm |
Tracking force range |
1,4-1,7 g (14-17 mN) |
Tracking force, recommended |
1,5 g (15 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
|
|
Recommended for following cartridges |
2M Black |
*) Typical value |
DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV Channel balance at 1kHz - 2 dB Channel separation at 1kHz - 23 dB Channel separation at 15 kHz - 15 dB Frequency range at -3dB - 20-22.000 Hz Frequency response - 20-20.000 Hz +/-2 dB Tracking ability at 315 Hz at recommmende tracking force - 80 μm Compliance, dynamic lateral - 9 μm/m N Stylus type - Special Elliptical Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN) Tracking force recommended - 3,0 g (30 mN) Tracking angle - 20° Internal impedance, DC resistance - 750 Ohm Internal inductance - 450 mH Recommended load resistance - 47 kOhm Recommended load capacitance - 200-600 pF Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
|
Reviews
There are no reviews yet.