| Content | Replacement stylus for Shure cartridges M44-7 , M44 MB and more.
High Quality aftermarket replacement stylus Shure N44-7
Specs:
Spherical Diamond bonded Tip 0.7mil
Tracking Force: 1,5 – 3.0 grams
16 or 33 or 45rpm NOT for 78rpm
Stylus Color: White
Swiss Made
Fits the following models:
Dual DN 305, Shure N 44C, N 44G, N 44-7, N 55 E, Pfeifer 10472, Pfeifer 10473,
Please check the picture against the stylus you have or get in touch if you need advice.
|
Genuine Original Stylus for OM 20, OM 20 Super, OMP20, LM 20, Concorde 20, TM 20
Nude Elliptical
| Stylus 2M Blue
| Technical data |
|
| Frequency range |
20-25.000 Hz |
| Frequency response |
20-20.000 Hz + 2 / - 1 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
| Compliance, dynamic, lateral |
20 µm/mN |
| Stylus type |
Nude Elliptical |
| Stylus tip radius |
r/R 8/18 µm |
| Equivalent stylus tip mass |
0,5 mg |
| Tracking force range |
1,6-2,0 g (16-20 mN) |
| Tracking force, recommended |
1,8 g (18 mN) |
| Tracking angle |
20° |
| Stylus colour |
Blue |
|
|
| Recommended for following cartridges |
2M Blue |
*) Typical value |
DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S
| Stylus 2M Black
| Technical data |
|
| Frequency range |
20-31.000 Hz |
| Frequency response |
20-20.000 Hz + 2 / - 0 dB |
| Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
| Compliance, dynamic, lateral |
22 µm/mN |
| Stylus type |
Nude Shibata |
| Stylus tip radius |
r/R 6/50 µm |
| Tracking force range |
1,4-1,7 g (14-17 mN) |
| Tracking force, recommended |
1,5 g (15 mN) |
| Tracking angle |
20° |
| Stylus colour |
Black |
|
|
| Recommended for following cartridges |
2M Black |
*) Typical value | Replacement stylus for the Carl Cox Signature CS-1 Cartridge.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output |
Reviews
There are no reviews yet.