Arturia AudioFuse 8Pre USB 2.0 Audio Interface 16 Inputs and outputs

For an 8-channel USB-C interface with choice features and premium componentry — or as a convenient way to add eight channels of sterling audio to your current setup — consider the Arturia AudioFuse 8Pre. The 8Pre comes fully loaded with eight Discrete Pro preamps, designed by Arturia and built from the ground up, to provide an ideal front end for today's project studio. Class-leading conversion and clocking with 129dBu of S/N and 119dB of dynamic range equip this interface for modern metal to string quartets. USB-C protocol yields a rock-solid connection and lightning-fast round trip. And eight channels over ADAT means you can easily stack two 8Pres for 16 inputs or inject its dependable signal path into a compatible interface. Adding value Arturia's AudioFuse 8Pre's included Creative Suite software pack, which offers some pretty significant sound-shaping and musicmaking options.

Adding serious value to the AudioFuse 8Pre interface is Arturia's included AudioFuse Creative Suite. The 3 Preamps bundle is the culmination of Arturia's 20 years of software emulation experience. It's your ticket to component-correct vintage analog coloration and sweetening on any recorded source — beefy bass drums to sparkling acoustic guitars and perfectly present vocals. A lite version of the Arturia's Analog Lab nets you a comprehensive collection of sought-after synth sounds, made all the sweeter by the Mini Filter's Moog-ish ladder filtering and step sequencing. Take it from Arturia users at Sweetwater: the Creative Suite's plug-ins will find their way onto just about any project you take on.

• Stackable 8-channel USB-C Interface with ADAT Out
• Premium componentry
• Choice analog and digital signal path
• Class-leading conversion and clocking
• 129dBu signal-to-noise ratio — among the best in its class
• 119dB of dynamic range — accurately capture heavy-hitting rock bands to delicate symphonic music without added noise
• ADAT optical out — stack two 8Pres or deliver 8 channels of digital audio over Lightpipe
• Plenty of I/O for interfacing with other gear in your studio
• Includes Arturia's AudioFuse Creative Suite software pack
• Includes onboard reverb
• Fully USB 2.0 compatible

• Computer Connectivity: USB 2.0
• Form Factor: Rackmount
• Simultaneous I/O: 8 x 8 (analog), 16 x 20 (total)
• Number of Preamps: 8
• Phantom Power: Yes
• A/D Resolution: 24-bit/96kHz
• Effects: AudioFuse Creative Suite Effects
• Analog Inputs: 2 x XLR-1/4" combo (Hi-Z), 2 x XLR-1/4" combo (Hi-Z/mic/line), 6 x XLR-1/4" combo (mic/line)
• Analog Outputs: 2 x 1/4" (main out), 6 x 1/4" (line out), 2 x 1/4" (speaker)
• Digital Inputs: 2 x Optical (ADAT)
• Digital Outputs: 2 x Optical (ADAT)
• Inserts: 2 x Inserts (ch 1, ch 2)
• Headphones: 1 x 1/4“, 1 x 1/8"
• USB: 1 x Type C
• Clock I/O: In, Out
• Software: AudioFuse Control Center
• OS Requirements - Mac: OS X 10.8.5 or later
• OS Requirements - PC: Windows 7 SP1 or later
• Rack Spaces: 1U
• Power Supply: 15V DC power supply (included)
• Height: 1.8"
• Width: 17.3"
• Depth: 10.2"

• Plug in your favorite guitar and turn your PC or Mac computer into a guitar amp and recording system without the need for any other hardware
• Enjoy immediate access to Guitar Combos from Native Instruments—the leading authentic guitar amp and stomp box modeling software—now including VST, AU and RTAS plugin versions
• Create Music Now! Incredibly powerful energyXT2 Compact music production software and Audacity editing software—both with full portability on all PC, Mac or Linux computers
• Directly works with your PC or Mac computer—ultra-low latency ASIO driver for PC audio optimization included
• Stereo Headphone output lets you jam with your computer and can also be used for monitoring with active monitor speakers
• Guitar Combos with variable-speed file playback function for MP3, WAV, AIFF audio files—perfect for easy learning and practicing—tuner and metronome function
• Powered via USB—no additional power supply required
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by BEHRINGER Germany

The FA-66 is a 6-channel portable FireWire audio interface designed with the mobile recording and performance professional in mind. The FA-66 offers incredible audio fidelity, stability, and a practical set of input and output options. It also offers two XLR/TRS combo inputs with phantom power, plus two RCA inputs, four balanced +4dBu outputs, optical S/PDIF I/O, a built-in analog limiter, zero-latency direct monitoring, solid metal construction, and FireWire bus power, all in a durable compact case.

    * 6-in/6-out 24-bit/96kHz simultaneous performance
    * 4-in/4-out 24-bit/192kHz simultaneous performance
    * 2 XLR/TRS combo jacks w/premium phantom-powered mic preamps
    * +4 dB balanced input and output
    * S/PDIF optical input & output ports with Sync LED indicator
    * MIDI in/out ports
    * Built-in analog limiter and indicator
    * FireWire bus powered
    * AC adaptor included
    * Mac OS X CoreAudio and Windows XP WDM and ASIO 2.0 support
    * Zero-latency Direct Monitoring
    * 6-pin and 4-pin IEEE1394 ports
    * Compact, solid-metal construction

Computer Based Recording Packages 

Computer-Based Recording Packages For All Players Of Musical Instruments 

The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.

Features:

USB 2.0 Desktop Recording Studio
44.1kHz to 96kHz sample rates, 24-bit resolution
Pantheon II VST/AU reverb plug-in with 6 legendary Lexicon reverbs
dbx® 60V high-voltage, ultra-low noise microphone preamps
Superior sonic performance
2 analog combi-jacks for mic/line inputs
2 analog 1/4" TRS balanced outputs
Zero latency monitoring
Low latency ASIO drivers
Streamlined monitor form factor puts all recording controls at your fingertips
Separate level meters and gain control per channel
1 side panel 1/4" instrument input
1 side panel headphone output with dedicated volume adjustment
MIDI in and out

Technical Specifications

Microphone Inputs:    Female XLR Pin 2 Hot
Input Impedance:    3kΩ balanced
Phantom Power:    +48 Volts
Maximum gain:    +58 dB
E.I.N. (at max gain):    -125 dBu @ 58dB gain typical (150Ω source) -129 dBu @ 58dB gain typical A-weighted (150Ω source)
Maximum Input Level:    +21 dBu at minimum gain
Frequency Response:    +0/-1 dB, 20Hz - 20kHz
THD+N:    +18 dBu maximum
Impedance:    32Ω Balanced, 16Ω Unbalanced
Headphone Output:    1/4" stereo jack 350mW per channel at 50Ω
MIDI Interface:    5 pin DIN connectors for MIDI in and MIDI out (5 volt signal)
Sample Rate:    44.1, 48, 88.2, or 96 kHz (determined by computer application)
Dynamic Range:    A/D (24 Bit) 108 dB typical, A-weighted, 20Hz - 20kHz
(44.1 kHz sample rate)
D/A (24 Bit) 110 dB typical, A-weighted, 20Hz - 20kHz
A/D/A (24 Bit) 102 dB typical, A-weighted, 20Hz - 20kHz
Power Requirements:    12W 9VAC
Power adaptors available for:
US and Canada: 120 VAC, 60 Hz Adapter: PS0913B - 120
Japan: 100 VAC, 50/60 Hz Adapter: PS0913B - 100
Europe: 230 VAC, 50 Hz Adapter: PS0913B - 230
UK: 240 VAC, 50 Hz Adapter: PS0913B - 240
Australia: 240 VAC, 50 Hz Adapter: PS0913B - 240-AU

• Hybrid FireWire/USB2 connectivity — connect to your computer via either bus-powered FireWire or hi-speed USB2.
• CueMix FX™ — flexible 10 input/14 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output.
• 10 inputs / 14 outputs — there's no channel sharing in the UltraLite-mk3 Hybrid; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
• Classic Reverb™ — provides five different room types, three frequency shelves with adjustable crossover points, shelf filtering and reverb lengths up to 60 seconds.
• Two forms of compression — a standard compressor with conventional threshold/ratio/attack/release/gain controls and the Leveler™, an accurate model of the legendary LA-2A optical compressor, which provides vintage, musical automatic gain control.
• Modeled EQ — provides 7-band parametric EQ modeled after British analog console EQs, featuring 4 filter styles (gain/Q profiles) to effectively cover a wide range of audio material. LP and HP filters are also supplied with slopes that range from 6 to 36 dB.
• CueMix FX cross-platform mixing software — attractive graphic mixing, graphic editing of parametric EQ and a convenient tabbed interface for quick access to all features in one window. Also provides full-screen real-time FFT display, spectrogram "waterfall" display, oscilloscope, X-Y plot and linear or polar phase analysis.
• Front-panel control — access any setting in your entire UltraLite-mk3 Hybrid mix directly from the front panel.
• “Reverb return" stream — allows users to record or mix UltraLite-mk3 Hybrid reverb output separately in their DAW. Effects can also be applied when the UltraLite-mk3 Hybrid is operating stand-alone (without a computer) as a complete stand-alone mixer.
• Stand-alone operation — program your mixes at the studio and then bring the UltraLite-mk3 Hybrid to your gig — no computer needed. Just plug in the included power adapter and you are ready to go. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
• Multiple CueMix FX mixes — for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear — with no latency.
• Two combo jacks provide hi-Z 1/4” guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain.
• Eight 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
• Precision Digital Trim™ — Digitally controlled analog trim on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs) provides accurate adjustements in 1 dB increments. Fine-tune the balance of your analog inputs and then save/recall trim configurations.
• Direct Digital Synthesis™ (DDS) — a DSP-driven phase lock engine and internal clock source that produces imperceptibly low jitter characteristics (below the noise floor), even when the UltraLite-mk3 Hybrid is resolved to an external clock source via SMPTE time code.
• Time code support — directly resolves to (or generates) time code via any quarter-inch input or output, without the need for an extra synchronizer.
• Sample-accurate MIDI — connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
• Expandable — add additional interfaces for more I/O as your needs grow.
• Separate TRS main outs with front panel volume control.
• Stereo 24-bit 96kHz S/PDIF in/out.
• Includes drivers for Mac & PC, including ASIO, WDM, Wave, Core Audio, and Core MIDI. Supports all popular Mac and Windows audio software.
• 100% compatible with all host-based effects processing in today's popular audio programs.
• Includes AudioDesk full-featured sample-accurate workstation software for the Mac with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
• Plug-and-play operation with your Mac or PC via FireWire or USB2.
• Front panel volume control for monitoring. Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available.
• Front panel headphone jack with volume control.
• Bus-powered FireWire operation. No need for external power when operating as a FireWire interface connected to a computer. A power supply is included for stand-alone operation.
• Chassis dimensions, excluding rack ears and front and back panel knobs and connectors: 9.5 x 7 x 1.75 inches (24.13 x 17.78 x 4.45 cm). Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached, fits one half of a standard 19 inch (48.26 cm) rack at 1U high.