| Content | Element 2.0 is an ideal ‘first upgrade’ speaker cable.
Element is well suited as an upgrade for ‘starter’ systems or for the speakers in a 5.1 set-up.
The Atlas Element 2.0 contains 2mm² of concentric stranded OFC (Oxygen Free Copper) contained in a high density polyethylene dielectric (insulation layer), unusual at this price point where PVC is much more common. Low quality dielectrics such as PVC typically degrade the music signal by imposing a characteristic blurring on the sound.
Element 2.0 is supplied in a pearl white finish, and can be terminated with Z-plugs or OFC spades.
| Construction |
Multi-core |
| Material |
6n OFC |
| Dielectric |
High Density PE (Polyethylene) |
| Screen |
none |
| Capacitance |
78.26 pF/m |
| Inductance |
0.51mH/m |
| Resistance |
0.0104Ohms/m |
| Outside Diameter |
3.5 X 7.0mm (rectangular section) |
| VOP |
0.695 |
|
SPK-440
Stage Multi Speakercable 4x4mm, 50m on spool
Technical Info
• Conductor drains Ø mm: OFC 4x4
• Conductor construction strands: 4x7x 50x0,12 Ø
• Conductor insulation Ø in mm: PE
• Conductor resistance Ohm/m: 0,006
• Outer insulation: PVC 16mm Ø matte blue
• Working temperature min / max: -10~60 °C
• Voltage overflash: 250V
| This cable is especially designed for connecting loudspeakers, and meets all the special technical requirements. Low-oxygen copper strands ensure better transmission quality and a long lifespan. Very flexible, well-suited for use with cable drums!
Center conductor cross section
1.5 mm²
Center conductor material
copper
Center conductor construction
30 x 0.25 mm
Number of internal conductors
2
Line resistance
< 13 Ohm(s)
PRICE PER METER |
- Zip speaker cable
- High strand count
- Rugged PVC jacket with polarity stripe
- Temperature range -20°C to +70°C
This flexible zip type loudspeaker cable uses two parallel conductors of stranded oxygen-free bare copper and a rugged PVC jacket with red polarity indication stripe. It is ideal for fixed installations and available with 2 x 0.75 mm², 2 x 1.5 mm², 2 x 2.5 mm² or 2 x 4 mm² cross sectional areas.
Exterior diameter
3.5 x 7 mm +/- 0.2 mm
AWG (American Wire Gauge)
16
Composition of conductor
bare copper, OFC, 48 x 0.20 mm
Number of internal conductors
2
Operating Temperature
-20 - 70 °C
| The world is round...
...and our speaker cable TRIBUN is so flat that you can barely see it once it has been installed. It can be installed under carpets, behind decorative moldings, on the ceiling, and underneath furniture. The TRIBUN is almost invisible. It is available in white, meaning that not even a mouse will recognise it!
This makes it ideally suitable for building installation (for example, in hotels, bars, sporting arenas) and in churches. The edges are slanted ensuring that your shoe will not get caught in it. The bottom is flat and finished to allow for application of double-sided adhesive tape.
The SC-TRIBUN can be easily split and is only 2 mm high!
The advantages:
- Good transmission quality due to the use of oxygen-free copper stranding
- Installation extremely flat and almost inconspicuous
- Incredibly flexible and easy to work with
- Designed like an ornamental molding, thus barely noticable
- Very reasonably priced
The application:
- Fixed installation in building technology
- Fast and inconspicous connection of HiFi-systems
- Church acoustics
Overall diameter
15.2 x 2.7 mm
Center conductor cross section
2.5 mm²
Center conductor material
copper
Center conductor construction
315 x 0.1 mm
Number of internal conductors
2
| Specification
Quality Cable MADE IN FRANCE
A P P L I C A T I O N
Wiring all types of sound systems
Connect amplifiers and loudspeakers
For fixed and mobile installations
PA
P R O D U C T A D V A N T A G E
Robust
Colours coding
Good mechanical resistance
Declined in cords – ON AIR PRO line
PRICE PER METER |
Reviews
There are no reviews yet.