| Content |
The APG20 is a receiver gateway, designed to be used in combination with the Wall LineInput (WLI) and Wall Microphone Input (WMI) flush mount wall input units. It converts the signal transmitted over UTP CAT5 cabling into signals corresponding Line andMicrophone levels, and makes them available on RCA and XLR connectors. The maximum distance that can be covered between the input unit and the receiver gatewayis 300 m. By applying a ARJ03P junction box halfway the cabling, which provides the requiredpower supply for the input units, the maximum distance can be extended to 600 meters. |
Volume Control 12W with priority.
|
Music Program Selector 1-6 with Relay
Toa - 100V installation |
Emergency combination system. Ενσωματώνεται σε σύστημα συναγερμού φωτιάς. Ενσωματωμένο πυκνωτικό μικρόφωνο για Επείγουσα Αναγγελία, Εξωτερική αυτόματη αναγγελία με αρχείο φωνής, Επιλογέας δοκιμής. Ρύθμιση έντασης εξόδου, Βάρος 4,6kg. Διαστάσεις (WxHxD): 482X88X380mm |
![]() - CONVENIENT INSTALLATION AND CONSTRUCTION WITHOUT NEED OF ID SETTING. - ADOPTION OF RS-422 COMMUNICATION METHOD TO SUPPORT A LONG DISTANCE. - REMOTE CONTROL FOR ZONE VOLUME AND SELECTION OF BGM. - INDEPENDENT LOCAL MIC AND BGM BROADCASTING. ![]() | | | Audio Output | 0dB(Balanced) | | Audio Input | Paging & RM MIC & LM MIC | -50dB(Balanced) | | BGM(Main & Local) | -10dB(Balanced) | | Tone Control (100Hz & 10kHz) | Paging MIC | ± 10dB | | Audio Output | ± 12dB | | Frequency Response | BGM | ± 3dB | | MIC | ± 3dB | | S / N | BGM | Better than 75dB | | MIC | Batter than 65dB | | T.H.D. | BGM | Less than 0.05% | | MIC | Less than 0.05% | | Priority Control | Paging MIC > DRP > RM1> RM2 > RM3 > RM4 > LM-8000 > Main BGM | | Phantom Power | DC 24V | | Serial Interface | Communication Speed | 9600bps | | Communication Distance | Maximum 300m(UTP CAT%) | | Operation Temperature | -10℃ ~ +40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | | Weight(SET) | 130g / 0.28lb | | Dimensions(SET) | 70(W) x 114(H) x 52(D)mm 2.8(W) x 4.5(H) x 2.0(D)in | | ※ Specifications and design subject to change without notice. |
|
| - CONSIDERATION OF USERʼS CONVENIENCE NUMERIC buttons and various function buttons are separated for timer program enter and convenience in use so that the user can easily operate. - ADOPTION OF VACUUM FLUORESCENT DISPLAY PANEL Adopting a vacuum fluorescent display of a dot matrix method enables to check operation status of each function at a glimpse. - PROGRAMMING USING A PC You can easily execute reservation setting thorough management program by connecting a PC to the RS-232C port. - VARIOUS MELODY AND SOUND OUTPUT You can generate various melodies and sounds by linking the flash memory mounted on this unit to our model, PV-632 (MULTI-VOICE FILE). - AC POWER OUTPUT CONTROL When PW-642 and other equipment are connected via the AC outlet terminal of PW-642, you can turn ON/OFF the AC outlet button in the front panel and manually control ON/OFF of the AC power connected to other device. - BACK-UP POWER You can continue to maintain the time counter for about a week though the inner back-up even though AC power turns off with current time set. There is no need of readjusting time even though AC power is applied. - MEASURE AGAINST POWER FAILURE A separate memory is used to prevent data extinguishment due to power failure or other unstable power. - AUTOMATIC RETURN In programming data using a key button on the front side of PW-642 without using a PC, no pressing any button is recognized as cancel of program entry to return to normal operation status. - AC POWER OUTPUT TIME ADJUSTMENT You can adjust the AC power output time of PW-642 by 1~20sec to prevent time delay from occurring in the interface with the outside power amp. - KEY LOCK You can protect reservations and userʼs setting. |
|
|
| | | PW - 642 | | Input Channel (Balanced) | 5CH | | Output Channel (Balanced) | 4CH | | Output Level | Maximum 1v | | AC Power Output 1 | Maximum 500W | | AC Power Output 2 | Maximum 30 w | | Data Preservation Time | 7 days and more | | Melody Time (15 settings total - 247 seconds) | No.1 | 2 seconds | | No.2 | 3 Seconds | | No.3 | 3 Seconds | | No.4 | 5 Seconds | | No.5 | 5 Seconds | | No.6 | 7 Seconds | | No.7 | 7 Seconds | | No.8 | 10 Seconds | | No.9 | 10 Seconds | | No.10 | 15 Seconds | | No.11 | 20 Seconds | | No.12 | 30 Seconds | | No.13 | 30 Seconds | | No.14 | 40 Seconds | | No15 | 60 Seconds | | Operation Temperature | -10°C ~+ 40°C | | Power Source | 100- 120 VAC or 220 -240VAC; 50/60 Hz (Supplied AC mains transformer depends on country requirements) | | Power Consumption | 10W | | Weight(SET) | 5.7Kg/12.6Ib | | Dimension(SET) | 482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in | | ※ Specifications and design subject to change without notice. | | | |
|
Reviews
There are no reviews yet.