| Content | Audient’s original iD4 had the audio industry rethinking what an entry-level audio interface could offer. Now, with the Audient iD4 MKII, Audient’s Little Interface That Could is an even better value for home and mobile music producers. Packing large-format console performance into a sleek desktop chassis, the Audient iD4 MKII fortifies your studio with one of Audient’s renowned Class A console mic preamps — the very same found in Audient’s ASP8024-HE recording console — along with an analog JFET DI stage to authentically capture the depth and dimension of your guitar or accompaniment instrument. We at Sweetwater are pleased to report that this latest version of Audient’s iD4 packs even better audio conversion, zippy USB 3.0 transmission speeds, and a future-looking USB-C connection for greater compatibility with modern laptops and tablets. Two studio-grade headphone outputs and a console-style monitor control supply trustworthy track monitoring and audiophile music reproduction. Then there’s Audient’s intuitive ScrollControl virtual scroll wheel, which lets you use the iD4 MKII’s big volume knob to tweak DAW and plug-in parameters and even dim your monitor output on command. Also new for MKII is Audient’s fully loaded ARC software suite, which gives you instruments, cab sims, plug-in FX, and Steinberg’s Cubase/Cubasis LE3 desktop and mobile DAWs upon product registration. Take it from recording engineers at Sweetwater: the Audient iD4 brought major value to the home and mobile studio. And with Audient’s iD4 MKII USB-C audio interface, there’s even more to love in this little box.
Features:
- 1 x Audient Console Mic Pre
- Class Leading Converters
- 1 x JFET Instrument Input
- 2 x Line Outputs
- Dual Headphone Outputs
- ScrollControl
- Speaker on/off Button
- Monitor Mix and Pan
- True Phantom Power over USB
- USB3.0 Bus Powered
- iOS Compatible
- 24bit/96khz
- All Metal Design
- Free Software + Plugins
Key tech specs
- Mic gain: 58dB
- Mic pre EIN: 128dB A-Weighted
- Mic pre SNR: 100dB A-Weighted
- Mic pre THD+N: <0.002%
- Frequency response (at unity gain): ±0.5dB 10Hz to 40kHz
- ADC Dynamic range: 121dB
- ADC THD+N: <0.001%
- Line output dynamic range: 126dB A-Weighted
- Line output THD+N: 0.0005%
- Frequency Response: ±0.1dB 10Hz to 40kHz
- Headphone amp (with USB-C host):
- Max Power with 30Ohm load: 220mW
- Max Power with 62Ohm load: 280mW
- Max Power with 600Ohm load: 100mW
- Power requirements:
- USB 3.0 - 900mA at 5V or USB-C - 1.5A at 5V
- iD4 iPad Support Note: Older/low end iPads might not be supported - recommend use with
- USB-C enabled iPads. Need to verify older iPads.
Included Cable:
Bundled with a free suite of creative software including Cubase LE and Cubasis LE for iOS, alongside industry leading plugins and virtual instruments, you can start recording as soon as you open the box. |
Mbox® is a premium audio interface, packing a wide range of analog and digital I/O connections into a mobile form factor.
* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* Bus-powered USB 2.0 connection for maximum mobility
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 96 kHz sample rates
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Hardware configuration:
o 4 x 4 simultaneous channels of I/O
o 2 XLR mic/line combo inputs with 48 V phantom power
o 2 1/4” DI inputs on front panel for easy access
o 2 balanced 1/4” monitor outputs
o 1 1/4” stereo headphone output with volume control
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Monitor control section with Mono and Dim controls
o Dedicated monitor volume knob
Pro Tools LE Software
Pro Tools 8 Software
The Pro Tools® software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.
Key Features
* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers
System Requirements
Mac PC
* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One USB port
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One USB port
Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers ![]( "MBOX")
|
System Requirements
Mac PC
* Mac OS X 10.5.8 (Leopard) or 10.6.1-10.6.4 (Snow Leopard)
* 1 GB RAM (2 GB recommended)
* 6 GB free disk space
* Intel® processor (no PowerPC® support)
* One FireWire port
* Windows® XP 32-bit SP3, Windows Vista® 32-bit SP2, Windows 7 32-bit, or Windows 7 64-bit
* 1 GB RAM (2 GB recommended)
* 5 GB free disk space
* One FireWire port
Compatibility
ASIO, Core Audio, WDM, MME, and multi-client drivers
Mbox Pro Hardware
Pro Tools Mbox Pro
Mbox® Pro is the ultimate high-definition recording interface, packing a wide range of analog and digital I/O connections into a desktop audio workstation.
* Compatible with most major audio software (Pro Tools LE®, Logic, Live, Cubase, and more)
* FireWire connection
* Professional-grade circuitry and converters deliver exceptional audio performance
* Up to 24-bit, 192 kHz sample rates*
* Soft-clip limiter lets you track hot signals without clipping—providing a classic overdriven tape saturation sound
* Built-in guitar tuner
* Onboard DSP offers flexible cue mixing and reverb effects
* Assignable Pro Tools multi-function button on interface gives you fast access to software functions
* Connect up to three pairs of monitors or do 5.1 surround mixing**
* Hardware configuration:
o 8 x 8 simultaneous channels of I/O
o 4 mic inputs with 48 V phantom power and high pass filter (2 XLR/DI combo, 2 XLR)
o 4 1/4" TRS line inputs
o 2 unbalanced Alt line inputs (2 RCA, 1 mini 1/8”)
o 6 1/4" TRS balanced line outputs
o 2 discrete 1/4” stereo headphone outputs with separate volume controls
o Stereo S/PDIF digital I/O
o 1 MIDI input, 1 MIDI output
o Word clock I/O
o Monitor control section with Mono, Mute, Dim, Alt Source, and Speaker A/B/C switching controls
o Dedicated monitor volume knob
* Up to 96 kHz sample rates supported with Pro Tools LE software.
** Mixing 5.1 surround sound in Pro Tools LE requires Complete Production Toolkit
Pro Tools LE Software
Pro Tools 8 Software
The Pro Tools software platform is used in professional studios around the world, and includes all the tools you need to easily compose, record, edit, mix, and master your projects with pro results—every time.
Key Features
* Award-winning Pro Tools recording, editing, and mixing
* 48 simultaneous stereo audio tracks (expandable with Toolkit options)
* Includes over 70 professional effects and virtual instruments
* Professional MIDI sequencing with dedicated MIDI Editor window
* Integrated Score Editor based on award-winning Sibelius notation software
* Full Elastic Time and Elastic Pitch to easily adjust timing and pitch on your tracks
* Unique Beat Detective LE automatic groove analysis and correction tool
* ReWire support for streaming your favorite applications right into Pro Tools
* Huge selection of compatible third-party plug-ins and software options
* Works on Windows and Mac computers
|
- Hybrid FireWire/USB2 connectivity — connect to your computer via either bus-powered FireWire or hi-speed USB2.
- CueMix FX™ — flexible 10 input/14 bus mixer with on-board DSP effects, including reverb with sends/returns, plus EQ and compression on every input and output.
- 10 inputs / 14 outputs — there's no channel sharing in the UltraLite-mk3 Hybrid; the mic inputs, S/PDIF I/O, headphone out and main outs are all handled as separate channels.
- Classic Reverb™ — provides five different room types, three frequency shelves with adjustable crossover points, shelf filtering and reverb lengths up to 60 seconds.
- Two forms of compression — a standard compressor with conventional threshold/ratio/attack/release/gain controls and the Leveler™, an accurate model of the legendary LA-2A optical compressor, which provides vintage, musical automatic gain control.
- Modeled EQ — provides 7-band parametric EQ modeled after British analog console EQs, featuring 4 filter styles (gain/Q profiles) to effectively cover a wide range of audio material. LP and HP filters are also supplied with slopes that range from 6 to 36 dB.
- CueMix FX cross-platform mixing software — attractive graphic mixing, graphic editing of parametric EQ and a convenient tabbed interface for quick access to all features in one window. Also provides full-screen real-time FFT display, spectrogram "waterfall" display, oscilloscope, X-Y plot and linear or polar phase analysis.
- Front-panel control — access any setting in your entire UltraLite-mk3 Hybrid mix directly from the front panel.
- “Reverb return" stream — allows users to record or mix UltraLite-mk3 Hybrid reverb output separately in their DAW. Effects can also be applied when the UltraLite-mk3 Hybrid is operating stand-alone (without a computer) as a complete stand-alone mixer.
- Stand-alone operation — program your mixes at the studio and then bring the UltraLite-mk3 Hybrid to your gig — no computer needed. Just plug in the included power adapter and you are ready to go. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls.
- Multiple CueMix FX mixes — for example, create different monitor mixes for the main outs and headphones. Or add send/return loops for outboard gear — with no latency.
- Two combo jacks provide hi-Z 1/4” guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain.
- Eight 24-bit 192kHz analog inputs and outputs on balanced/unbalanced 1/4" TRS jacks
- Precision Digital Trim™ — Digitally controlled analog trim on all analog inputs (mic/guitar inputs + quarter-inch TRS inputs) provides accurate adjustements in 1 dB increments. Fine-tune the balance of your analog inputs and then save/recall trim configurations.
- Direct Digital Synthesis™ (DDS) — a DSP-driven phase lock engine and internal clock source that produces imperceptibly low jitter characteristics (below the noise floor), even when the UltraLite-mk3 Hybrid is resolved to an external clock source via SMPTE time code.
- Time code support — directly resolves to (or generates) time code via any quarter-inch input or output, without the need for an extra synchronizer.
- Sample-accurate MIDI — connect a MIDI controller and/or sound module with no separate interface needed. MIDI I/O is sample-accurate with supporting software.
- Expandable — add additional interfaces for more I/O as your needs grow.
- Separate TRS main outs with front panel volume control.
- Stereo 24-bit 96kHz S/PDIF in/out.
- Includes drivers for Mac & PC, including ASIO, WDM, Wave, Core Audio, and Core MIDI. Supports all popular Mac and Windows audio software.
- 100% compatible with all host-based effects processing in today's popular audio programs.
- Includes AudioDesk full-featured sample-accurate workstation software for the Mac with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync.
- Plug-and-play operation with your Mac or PC via FireWire or USB2.
- Front panel volume control for monitoring. Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available.
- Front panel headphone jack with volume control.
- Bus-powered FireWire operation. No need for external power when operating as a FireWire interface connected to a computer. A power supply is included for stand-alone operation.
- Chassis dimensions, excluding rack ears and front and back panel knobs and connectors: 9.5 x 7 x 1.75 inches (24.13 x 17.78 x 4.45 cm). Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached, fits one half of a standard 19 inch (48.26 cm) rack at 1U high.
|
Computer Based Recording Packages
Computer-Based Recording Packages For All Players Of Musical Instruments
The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.
Size/Weight
| Dimensions | Width | 170mm (6-3/4“) | | Height | 59mm (2-3/8“) | | Depth | 192mm (7-5/8“) | | Weight | Weight | 770g (1.7 lbs.) |
General Specifications
| Sampling Frequency Rate | USB AUDIO 1.1, 16bit/44.1kHz |
Effects
| Types | Dynamic | 1-knob Compressor (COMP) x 2 |
Storage and Connectivity
| Connectivity | Headphones | Stereo Phone connector x 1 | | Microphone | Mic/Hi-Z input x 2 | | LINE IN | Phone connector x 4 (L/MONO x 2, R x 2) | | LINE OUT | Phone connector x 2 (L, R) | | USB TO HOST | USB (TO HOST) |
Power Supply
System Requirements
| Windows | PC | Windows-based computer with built-in USB interface Windows-based computer with built-in USB interface | | CPU | 1 GHz or better Intel Core / Pentium / Celeron processor 750 MHz or better Intel Core / Pentium / Celeron processor | | Support OS | Windows Vista / Windows XP Professional / XP Home Edition | | Memory | More than 1 GB More than 128 MB | | Macintosh | PC | Macintosh computer with built-in USB interface | | CPU | Intel CPU / Macintosh G3 processor 300 MHz or better | | Support OS | Mac OS X 10.3.3 or higher | | Memory | More than 128 MB |
Accessories | Included Accessories | Cable | USB Cable | | Others | CUBASE AI DVD, Owners Manual |
| U-CONTROL UCA222 Ultra-Low Latency 2 In/2 Out USB Audio Interface with Digital Output and Massive Software Bundle
Behringer U-Control UCA202
- 2 In/2 Out USB Audio Interface
- Mac or PC, no drivers required
- 16-bit/48kHz converters
- Low latency
- Headphone output
- S/PDIF optical out
- USB powered
- Free Software
- Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback
- Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms
- Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins
- Works with your PC or Mac computer—no setup or drivers required
- High-resolution 48 kHz converters for high-end audio quality
- Stereo Headphone output with dedicated Level control lets you monitor both input and output
- Additional S/PDIF optical output for direct digital conversion
- Powered via USB—no external power supply needed
- High-quality components and exceptionally rugged construction ensure long life
- Conceived and designed by BEHRINGER Germany
The Smallest, Most Portable 2x2 USB Interface Around!Are you looking for a simple upgrade to your computer's stock audio hardware? Do you want to record high-quality stereo audio to your laptop? Are you searching for the most affordable audio interface for computer DJ applications? The Behringer UCA222 USB Audio Interface does all this and more in one of the smallest, simplest, and lowest-priced packages around. It's a quick, simple, reliable solution for a wide range of audio applications.
High-Quality, Industry Standard ConnectionsLook at your computer's audio output. What is it? A 1/8-inch mini stereo jack, most likely. That's fine for plugging in headphones, but a terrible way to connect to external sound systems, stereos, PAs, mixing boards, or any other audio hardware. The UCA222 easily connects to your outboard pro audio gear, and you even get an optical S/PDIF digital output for connecting to high-end digital equipment. Now, take a look at your computer's input. If it has one at all, it's most likely the same deal -- 1/8-inch mini-jack. Again, the Behringer UCA222 provides universally recognized RCA inputs for bringing a wide variety of audio sources and equipment into your computer for pristine recording. You also get a dedicated headphone output for direct monitoring of both the ins and the outs on the UCA222.
Greatly Improved AudioYou computer's built-in audio system has a number of limitations, especially if your computer is a laptop. Machine noise and other electrical interference can disrupt, distort, or otherwise ruin recording and critical listening and playback situations. The Behringer UCA222 solves this problem by placing your sound card at the end of a USB cable run far from your machine's noisy electrical components. It seems like a such a simple solution, but this arrangement greatly reduces interference and provides a wonderfully low noise-floor for recording and professional playback. The UCA202 provides analog-to-digital audio conversion at 48 kHz or 44.1 kHz sampling rates and 16-bit resolution.
Super Simple Setup
As a USB device, the UCA222 is the textbook example of a Plug-N-Play device. Compatible with both Windows and Mac systems, the UCA222 requires no additional software drivers to work. Relying on your operating system's sound architecture, the UCA222 is instantly compatible with just about every audio software on the market, from multitrack DAWs like Logic and Cubase to audio editing programs like BIAS to DJ software like Itch. Spend time making music, not troubleshooting your hardware.
The applications for the Behringer UCA222 USB Audio Interface are practically limitless. Whether you're an electronic music producer, latptop DJ, mix engineer, audio archivist, or just a lover of music, the Behringer UCA222 is just about the easiest way to add a professional audio interface to your computer. |
Reviews
There are no reviews yet.