| Content | 10g dj style 1/2”-mount cartridge headshell
This headshell for 1/2”-mount cartridges and 4-pin turntable arm (Audio-Technica, Technics, SME) features all-metal construction and an integral finger lift. It is equipped with a rubber washer for a secure fit to your tone arm, and comes with colour-coded headshell lead wires and cartridge mounting screws, nuts and washer.
- All metal construction with integral finger lift
- Rubber washer for secure fit to tone arm
- Color coded lead wires and cartridge mounting hardware
- No tilt adjustment
- No overhang adjustment of the headshell on the arm (cartridge overhang adjustment is provided by the two slots on the headshell)
| OMNITRONIC 10605258 Headshell universal C for Turntable
Omnitronic's headshell caters for a 1/2" pick-up system. It is durable, of high quality, making it thus ideal for professional scratching.
Universally adaptable headshell
- Simply indispensable as replacement
- Without stylus
Package contents
| Material: |
Metal |
| Color: |
Black |
| Weight: |
10 g |
|
Technical data
Output voltage at 1000 Hz, 5cm/sec. 0.2 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 20 dB
Channel separation at 15 kHz > 10 dB
Frequency range at - 3dB 20-25.000 Hz
Frequency response 20-20.000 Hz ± 3 dB
Tracking ability at 315Hz at recommended tracking force *) 65 µm
Compliance, dynamic, lateral 8 µm/mN
Stylus type Nude spherical
Stylus tip radius R 18 µm
Tracking force range 3.0-5.0 g (30-50 mN)
Tracking force, recommended 4.0 g (40 mN)
Tracking angle 20°
Internal impedance, DC resistance 6 Ohm
Recommended load impedance > 10 Ohm
Coilwire material High Purity Copper (OFC)
Cartridge colour Black
Cartridge weight 13 g | Technical data
Output voltage at 1 kHz 5 cm/sec 0,45 mV
Channel balance
Channel separation at 1 kHz > 23 dB
Channel separation at 15 kHz > 15 dB
Frequency range at -3 dB 20 Hz - 50 kHz
Frequency response 20 Hz - 20 kHz +3/-1
Tracking ability at 315 Hz at recommended tracking force *) 80 μm
Compliance, dynamic, lateral 12 μm/mN
Stylus type Nude Fine Line on Alu cantilever
Stylus tip radius r/R 8/40
Tracking force range 2,2-2,7 g (22-27 mN)
Tracking force recommended 2,5 g (25 mN)
Tracking angle 20º
Internal impedance, DC resistance 5 Ohm
Recommended load impedance 50-500 Ohm
Cartridge body material Stainless steel Aluminium
Cartridge colour Red/Black
Cartridge weight 10,7 g |
Technical data
Output voltage at 1000 Hz, 5cm/sec. 0.2 mV
Channel balance at 1 kHz
Channel separation at 1 kHz > 25 dB
Channel separation at 15 kHz > 20 dB
Frequency range at - 3dB 20-60.000 Hz
Frequency response 20-20.000 Hz + 1,5 / - 0 dB
Tracking ability at 315Hz at recommended tracking force *) 70 µm
Compliance, dynamic, lateral 8 µm/mN
Stylus type Nude Ortofon Replicant 100
Stylus tip radius r/R 5/100 µm
Tracking force range 2.5-3.5 g (25-35 mN)
Tracking force, recommended 3.0 g (30 mN)
Tracking angle 20°
Internal impedance, DC resistance 6 Ohm
Recommended load impedance > 100 Ohm
Coilwire material Goldplated Silver
Cartridge colour Blue/Gold
Cartridge weight 13 g |
Add some serious style to your deck with these sleek, metallic headshells from Ortofon. The SH-4 is a much better look than your standard black plastic headshell plus features a big finger lift, short head to make it easier to watch and place your stylus on the groove, and gold plated wire terminals for a better signal. Mounting screws included. Offering the type of premium quality DJs have long come to expect from ORTOFON, the SH-4 model headshell delivers superior performance and durability and is compatible with all DJ turntables and DJ cartridges on the market.
ORTOFON SH-4 HEADSHELL SPECIFICATIONS:
- ALL METAL CONSTRUCTION
- GOLD PLATED TERMINALS
- INCLUDES MOUNTING SCREWS
- WORKS WITH ANY CARTRIDGE (PERFECT FOR ORTOFON OM SERIES)
- MADE IN JAPAN
|
Reviews
There are no reviews yet.