Content | P-mount Dual Moving Magnet cartridge with elliptical bonded stylus
The AT85EP allows owners of Technics™, Hitachi™, Pioneer™* and similar linear tracking turntables with T4P plug-in connectors to enjoy the high-fidelity sound that only Audio-Technica can offer.
Designed specifically for the linear format, the AT85EP features Audio-Technica’s unique dual moving magnet construction. The dual magnet system is combined with the para-toroidal coil construction to assure an excellent sonic clarity and wide channel separation.
- 0.3 x 0.7 mil elliptical stylus
- Aluminium Pipe Cantilever
- Elliptical bonded diamond stylus
This 0.3 x 0.6 mil Eliptical cartridge fits P-mount turntables.
Type |
Dual Magnet |
Mounting |
P-mount |
Frequency Response |
20 - 20,000 Hz |
Channel Separation |
20 dB at 1kHz |
Output Channel Balance |
2.0 dB |
Output Voltage |
3.5 mV (mV at 1 kHz, 5 cm/sec) |
Vertical Tracking Angle |
20° |
Vertical Tracking Force Range |
1.0 - 1.5g |
Stylus Shape |
Elliptical |
Stylus Size |
0.3 x 0.7 mil |
Stylus Construction |
Bonded Round Shank |
Cantilever |
Aluminium Pipe |
Coil Inductance |
400mH (1 kHz) |
Recommended Load Impedance |
47,000 ohms |
Recommended Load Capacitance |
100-200 pF |
Weight |
6.0g |
Dimensions |
H10.0×W15.3×D35.1 mm |
Replacement Stylus |
ATN85EP |
| Co-developed by one of the most legendary DJs of all time, the Ortofon Q.Bert provides unsurpassed handling, high output voltage, and low wear characteristics that literally put it in a class of its own. Turntablists and mix DJs alike will appreciate the strong output of this cartridge, coupled with unrivaled tracking ability and sonic characteristics. The Q.Bert features a more subdued high end, which helps to minimize surface noise from worn vinyl, and an accentuated mid-range to help bring scratching to the front of the sound stage.
Output voltage at 1000Hz, 5cm/sec. |
11 mV |
Channel balance at 1kHz |
1,5 dB |
Channel separation at 1kHz |
22 dB |
Channel separation at 15 kHz |
- |
Frequency range at -3dB |
20-18.000 Hz |
Frequency response |
20-18.000 Hz - 3 dB |
Tracking ability at 315 Hz at recommmende tracking force |
90 μm |
Compliance, dynamic lateral |
12 μm/m N |
Stylus type |
Spherical |
Stylus tip radius |
R 18 μm |
Tracking force range |
3,0 g (30 mN) |
Tracking force recommended |
4,0 g (40 mN) |
Tracking angle |
20° |
Internal impedance, DC resistance |
1.680 Ohm |
Internal inductance |
920 mH |
Recommended load resistance |
47 kOhm |
Recommended load capacitance |
200-400 pF |
Cartridge weight |
5 g |
Replacement stylus unit |
Q.Bert |
| A budget cartridge that out performs a lot of other top-of-the-line models.
No need to go broke to get an affordable, tough-as-nails scratching tool.
Technical Data:
- Output voltage at 1000 Hz, 5cm/sec: 5 mV
- Channel balance at 1 kHz: 2 dB
- Channel separation at 1 kHz: 20 dB
- Channel separation at 15 kHz: 15 dB
- Frequency range at - 3dB: 20-20.000 Hz
- Frequency response: 20-18.000 Hz + 3 / - 2 dB
- FIM distortion at recommended
tracking force, DIN 45.542:
- Tracking ability at 315Hz at
recommended tracking force: 70 µm
- Compliance, dynamic, lateral: 7 µm/mN
- Stylus type: Spherical
- Stylus tip radius: R 26 µm
- Equivalent stylus tip mass: 0,5 mg
- Tracking force range: 3,0-5,0 g (30-50 mN)
- Tracking force, recommended: 4,0 g (40 mN)
- Tracking angle: 20°
- Internal impedance, DC resistance: 750 Ohm
- Internal inductance: 450 mH
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-600 pF
- Cartridge colour: Black
- Cartridge weight: 5 g
- Replacement stylus unit: PRO S
| THE CARL COX SIGNATURE MODEL, OPTIMIZED FOR DANCE MUSIC DJ PERFORMANCE.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 32dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: club and mobile DJs, high output |
Type: MC-type
Playback frequency range: 20-20,000Hz
Output voltage: 0.35mV (1kHz and 5cm/sec. horizontal signal)
Horizontal/vertical output ratio: 30dB (1kHz)
Output balance: 1.0dB (1kHz)
Stylus pressure: 2.3-2.7g (2.5g standard)
Coil impedance: 10O1kHz
DC resistance: 10O
Load resistance: More than 100O(when head amp connected)
Coil impedance: 28µH (1kHz)
Static compliance: 20×10-6cm/dyne
Dynamic compliance: 6×10-6cm/dyne (100Hz)
Needle shape: Round needle (0.65mil)
Cantilever: Duralumin pipe
Vertical tracking angle: 23°
Dimensions: H16×W16.6×D26.5mm
Weight: 6.9g
Accessories: Non-magnetic screwdriver x1, Washers x2, Protector x1, Cartridge fastening screw 13mm×2, 19mm×2, Nut x2, Brush x1, PCOCC lead set x1
|
The versatile M92E fits both of the major types of tone-arm mounts in use today. This high-value model offers faithful sound reproduction at a very attractive price. A natural bi-radial diamond tip teamed with a tubular aluminum alloy stylus cantilever accurately traces the grooves of your records for a difference you can hear. Fits both of the major types of tonearm mounts in use today, making it compatible with over 85% of turntables. Biradial Diamond Tip + Tubular Aluminum Alloy Stylus Cantilever. Accurately traces the grooves of your records for smooth sound throughout the frequency range. Universal mount Biradial diamond tip Tubular aluminum alloy stylus cantilever Standard mount adapter Mounting hardware Stylus guard Low Tracking Force Minimizes wear on your irreplaceable vinyl collection
Shure M92E Excellent high-value cartridge with smooth sound. Fits turntables with P-mount tone arms or standard ½ inch mount tone arms.
- Type: MM
- Fixing: P-mount
- Output voltage: 5,0mV bei 1kHz, 5cm/sec.
- Amplifier-connection: Phono MM
- Frequency range: 20-18.000Hz
- Material: diamond, bonded
- Stylus type: elliptical 0.4 x 0.7 mil
- Tracking force range: 0,75-1,5g
- Tracking force, recommended: 1,25g
- Recommended load resistance: 47 kOhm
- Recommended load capacitance: 200-300pF
- Weight: 7,3g*
|
Reviews
There are no reviews yet.