Content |
Large diaphragm condenser microphone for recording, broadcast. and live sound
The large diaphragm condenser microphone CX112B has a contemporary design and superior performance characteristics. This mic is an exceptional tool for professional audio production, project studios and live stage performances.
Delivering a smooth, uniform frequency response the CX112B offers a rich, full bodied sound delivered by its 27.5 mm capsule. The CX112B is equipped with a bass roll-off filter to help eliminate rumble in the lower frequencies and a 10 dB pad for use in higher SPLs, up to 145 dB.
The CX112B operates on phantom power of 48 V phantom and includes a threaded metal stand adapter and a foam-lined wooden carrying case.
For optimum results, use the CX112B with a high quality mic preamplifier and microphone cable (see CBL20).
Type | Condenser | Polar Pattern | Cardioid | Frequency Response | 20 Hz - 20 kHz | Impedance | 120 Ohms | Sensitivity | 18 mV/Pa @ 1kHz |
|
Acoustical operating principle | Pressure gradient transducer | Directional pattern | Omnidirectional, wide angle cardioid, cardioid, hypercardioid, figure-8 plus one intermediate position each | Frequency range | 20 Hz ... 20 kHz | Sensitivity at 1 kHz into 1 kohm | 34/47/62 mV/Pa* | Rated impedance | 50 ohms | Rated load impedance | 1000 ohms | Equivalent SPL CCIR 468-3 | 28/25/23 dB* | Equivalent SPL DIN/IEC 651 | 16/13/11 dB-A* | S/N ratio CCIR 468-3 | 66/69/71 dB* | S/N ratio DIN/IEC 651 | 78/81/83 dB* | Typical SPL (tube characteristic) | K | Maximum output voltage | 18 dBu | Dynamic range of the microphone amplifier cardioid DIN/IEC 651 for | 101 (121) dB | Powering | Power supply N 149 | Matching connectors | Microphone DIN 8F, Power supply XLR 3F | Weight | 730 g | Diameter | 70 mm | Length | 201 mm |
* Omnidirectional / cardioid / figure-8
| A/B, X/Y, and M/S stereo recording
Ambience recording
Grand piano, woodwind and brass instruments
Percussions
Drums
Classical music recording
Studio applications
- Back-to-back large-diaphragm multi-pattern transducer
- True condenser technology
- High sensitivity and 155 dB maximum SPL capability
- Switchable 20 dB preattenuation pad
- Switchable bass cut filter
- Legendary, pristine AKG sound quality
- Complete with spider-type shock mount and aluminium carrying case
Type |
Dual-capsule,1-inch large-diaphragm, true condenser pressure-gradient microphone |
Polar pattern |
Cardioid, omnidirectional, figure-eight |
Frequency range |
20 to 20,000 Hz |
Sensitivity |
28 mV/Pa (-31 dBV) |
Max. SPL |
135/155 dB SPL (0/-20 dB) for 0.5% THD |
Equivalent noise level |
16 dB-A (IEC 60268-4) |
Signal/noise ratio (A-weighted) |
78 dB |
Preattenuation pad |
0 dB, -20 dB |
Bass filter |
12 dB/octave, 300 Hz |
Impedance |
=1000 ohms |
Current consumption |
|
|
Acoustical operating principle | Pressure gradient transducer | Directional pattern | Cardioid | Frequency range | 20 Hz ... 20 kHz | Sensitivity at 1 kHz into 1 kohm | 20 mV/Pa | Rated impedance | 50 ohms | Rated load impedance | 1000 ohms | Equivalent SPL CCIR 468-3 | 24 dB | Equivalent SPL DIN/IEC 651 | 12 dB-A | S/N ratio CCIR 468-3 | 70 dB | S/N ratio DIN/IEC 651 | 82 dB | Maximum SPL | 114 dB for THD | Maximum output voltage | 8 dBu | Dyn. range of the mic. amplifier DIN/IEC 651 | 102 dB for THD | Supply voltage | Power supply N 149 A | Matching connector | Microphone: DIN 8F, Power Supply: XLR 3F | Weight | 460 g | Diameter | 57 mm | Length | 142 mm |
|
NT2-A - ?The Legend Continues? Multi Pattern 1? Condenser Microphone.
The new NT2-A carries on the tradition forged by the now legendary R?DE NT2.
A professional large capsule (1?) studio microphone incorporating three-position
pick-up patterns, pad and high pass filter switches conveniently located on the
mic body.
At the heart of the NT2-A is the Australian designed and manufactured HF1 dual
diaphragm capsule. The frequency and transient response of this new transducer
has been voiced to complement today?s modern recording techniques, and yet still
evoke the silky smooth character of the legendary microphones of the 50?s and 60?s.
These features provide the flexibility and superlative audio characteristics that make
the NT2-A one of the most versatile condenser mics available.
The NT2-A?s variable controls allow switching between Omni, Figure 8, and Cardioid
polar patterns. The three position high-pass filter provides a flat response or an 80Hz
and 40Hz high pass filter to be selected. Finally the microphones Pad can be switched
between 0 dB, -5dB and -10dB. The NT2-A comes in a soft pouch with an M2 stand mount.
SPECIFICATIONS:
Features:
The Australian designed and manufactured HF1 1? edge terminated, gold sputtered, dual
5 um diaphragm capsule. 3-position variable polar pattern: Omni, Cardioid & Figure 8; all
controlled on the mic. 3-position variable high-pass filter: Flat, 80 Hz or 40 Hz. 3-position
variable pad: 0 dB, -5 dB or -10 dB. Ultra low noise, transformerless SMT circuitry. Wide
dynamic range. High strength heat-treated steel mesh head. Durable satin nickel finish.
Internal capsule shock mounting. Supplied complete with soft pouch and clip. Designed
and manufactured in Sydney, Australia.
Operation power:
The NT2-A is designed to operate from phantom power to the P48 standard. The NT2-A will
operate between 44V and 52V applied with positive polarity to pin 2 and pin 3 of the output
XLR connector.
Operation output impedance:
The NT2-A will operate satisfactorily into a load impedance as low as 1 kΩ. If a load below this
is used, the output signal level will be reduced. The NT2-A output is balanced between pin 2 (hot)
and pin 3 (cold). Pin 1 is ground.
Acoustic principle: Externally polarized 25 mm (1?) dual diaphragm.
Directional pattern: Multi-pattern
Frequency range: 20 Hz ~ 20 000 Hz
Output impedance: 200 Ω
Signal noise ratio din iec 651:
87 dB (1 kHz rel 1 Pa; per IEC651, IEC268-15)
Equvalent noise: 7 dBA SPL (per IEC651, IEC268-15)
Maximum spl:
147 dB (@ 1% THD into 1 kΩ); 157 dB (@ 1% THD into 1 kΩ) - pad at maximum
Sensitivity: -36 dB re 1 Volt/Pascal; (16 mV @ 94 dB SPL) +/-2 dB
Dynamic range din iec 651: 140 dB (per IEC651, IEC268-15)
Power supply voltage: 48 Volts (P48)
Output connection:
3 pin XLR, balanced output between; pin 2(+) and pin 3(-); Pin 1 ground
Weight with battery: 860 grm |
K2 - ?It cant be done?? Precision Variable Pattern Dual 1? Condenser Valve Microphone.
The R?DE K2 is the result of designing and building 1000?s of valve microphones. The
K2?s HF-1 capsule is the pinnacle of transducer technology. The sound quality combines
modern high-end specifications with the character and subtleties of the legendary 50?s mics.
Infinitely variable control of the K2?s polar patterns provides the freedom and flexibility to
excel in any recording situation. The K2 is another example of R?DE?s commitment to
building quality studio microphones to meet the exacting standards demanded by today?s
professionals.At the 2004 Frankfurt Music Messa, 56 of the most prestgious music industry
magazines voted the K2 the ?Best Studio Microphone of 2004?.
SPECIFICATIONS:
Features:
? New large capsule with gold sputtered diaphragm. ? Ultra low noise.
? Wide dynamic range. ? Class ?A? valve circuitry. ? Hand-selected and
graded 6922 twin-triode valve. ? Dedicated Power Supply. ? High strength
welded and heat-treated steel mesh head. ? Durable satin nickel finish.
? Internal capsule shock mounting. ? High level of RF rejection. ? Supplied
complete with SM2 Shock Mount and RC2 Custom Carry Case.
? Continuously variable polar patterns. From omni, through cardiod to
figure 8, controlled at the power supply.
Operation power:
The K2 is designed to operate from a dedicated power supply (110 - 120 V/220 - 240 V, 50/60 Hz)
Acoustic principle: Externally polarized 25 mm(1?) condenser.
Directional pattern:
Continuously variable multi pattern -Omni, through Cardioid to figure 8.
Frequency range: 20 Hz - 20 kHz
Output impedance:
Valve impedence converter with bipolar output buffer.
Signal noise ratio din iec 651:
> 81 dB (1kHz relative to 1 Pa; per IEC651,IEC268-15).
Equvalent noise: 10 dBA SPL (per IEC651, IEC268-15).
Maximum spl: 162 dB (@ 1% THD into 1k).
Sensitivity:
-36 dB re 1 Volt/Pascal (16 mV @ 94 dB SPL) +/- 2 dB.
Power supply voltage:
Dedicated Power Supply(110 - 120 V/220 - 240 V, 50/60 Hz).
Weight: 815 gms
Dimensions width: 208.5 mm
Dimensions depth: 55 mm
Dimensions height: 55 mm
Maximum output voltage: > +30 dBu (@ 1% THD into 1 k).
|
Reviews
There are no reviews yet.