| Content |
1. Frequency Range: 136-174 / 400-520 MHz
2. Dual-Band Display, Dual Freq. Display, Dual-Standby
3. Output Power: 8Watts(max)
4. 128 Channels 50 CTCSS and 104 DCS
5.Battery:5800mAh
6. FM Radio (65.0MHz-108.0MHz)
7. 1750Hz Brust Tone
8. Built-in VOX Function
9. LED Flashlight
10. Large LCD Display
11. High /Low RF Power Switchable
12. 25KHz/12.5KHz Switchable
13. Emergency Alert
14. Low Battery Alert
15. Battery Saver
16. Time-out Timer
17. Keypad Lock
18. Monitor Channel
19. Channel Step: 2.5/5/6.25/10/12.5/25KHz
20. ROGER SET
|
General
|
| Frequency Range |
65-108MHz(Commercial FM radio reception only)
VHF:136-174MHz & UHF:400-520MHz (RX/TX) |
| Memory Channels |
Up to 128 channels |
| Frequency Stability |
2.5ppm |
| Frequency Step |
2.5/5/6.25/10/12.5/20/25/50KHz |
| Antenna Impedance |
50 ohm |
| Operating Temperature |
-20°c to +60°c |
| Supply Voltage |
DC7.4V 5800mAh Rechargeable Lithium-Ion |
| Consumption in standby |
≤75mA |
| Consumption in reception |
380mA |
| Consumption in transmission |
≤1.4A |
| Mode of operation |
Simplex or semi-duplex |
| Duty Cycle |
03/03/54min(RX/TX/Standby) |
| Dimensions |
109.5x 59.5x 34.3mm |
| Weight |
200g (approximately) |
|
Transmitter
|
| RF Power |
8W/5W/1W |
| Type of modulation |
FM |
| Emission Class |
16K Ø F3E/11K Ø F3E(W/N) |
| Maximum deviation |
≤±5kHz/≤±2.5kHz (W/N) |
| Spurious Emissions |
<-60dB |
|
Receiver
|
| Receiver Sensitivity |
0.2uV (at 12dB SINAD) |
| Intermodulation |
60dB |
| Audio output |
1000mW |
| Adjacent channel selectivity |
65/60dB |
Note:
- All specification shown are subject to change without notice.
Package Contain:
1× baofeng TR-818UV Dual band radio
1× 7.4V 5800mAh Li-ion Battery Pack
1× Dual Band Portable Antenna
1× Battery Belt Clip
1× Desktop Charger with AC adapter
1× Hand strap
1× English Manual
1x Free Earphone
1x USB Charger
|
The N-8000DI is a Direct select unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It is equipped with each 32 contact inputs and outputs, and the indicators on the front panel indicate the output statuses. Connecting the unit to the LAN permits the calling station display, external equipment control, and direct selection function to be realized. It can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting bracket or installed on a wall using an optional wall mounting bracket.
| Power Source | 220 - 240 V AC, 50/60 Hz | | Power Consumption | 16 W (max.) | | Contact Input | 32 inputs, no-voltage make contact input, open voltage: 24 V DC,
short-circuit current: 5 mA or less, removable terminal block (20 pins)
(1 common terminal for 4 inputs) | | Contact Output | 32 outputs, relay contact output, contact capacity: 24 V DC/2 - 500 mA,
removable terminal block (32 pins) | | Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Connector: RJ45 connector | | Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp,
Channel indication lamps (32 channels) | | Other | Firmware update function, System data hold function, Time of day hold facility,
Reset switch (front panel) | | Setting Method | Rack, Desk, Surface mount | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 90 %RH or less (no condensation) | | Finish | Pre-coated steel plate, black, 30 % gloss | | Dimensions | 420 (W) × 44.3 (H) × 267 (D) mm (16.54" × 1.74" × 10.51“) | | Weight | 2.8 kg (6.17 lb) | | Accessory | Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Removable terminal plug (10 pins)…4, Removable terminal plug (16 pins)…4,
Plastic foot…4, Screw for fitting plastic foot…4, Rack mounting bracket…2,
Screw for mounting bracket…8, Screw for rack mounting…4 | | Option | Wall mounting bracket: YC-850 |
|
The YC-290 is a wall-mounting bracket specially designed for the Hands-free master station of the N-8000 series Packet Intercom system. The master station can be installed on a wall or its front operation panel can be inclined from the desk surface by attaching the YC-290.
| Finish | Surface-treated steel plate, gray, paint | | Dimensions | 64 (W) × 131.5 (H) × 31.8 (D) mm | | Weight | 100 g | | Accessory | Screw for wall mounting (wood screw) …2, Rubber foot …4 | | Applicable Model (option) | N-8011MS |
|
The YC-280 is a wall-mounting bracket specially designed for the master station of the N-8000 series Packet Intercom system. The master station can be installed on a wall or its front operation panel can be inclined from the desk surface by attaching the YC-280.
| Finish | Surface-treated steel plate, gray, paint | | Dimensions | 100 (W) × 140 (H) × 31.8 (D) mm | | Weight | 120 g | | Accessory | Screw for wall mounting (wood screw) …2, Rubber foot …4 | | Applicable Model | N-8000MS, N-8010MS, N-8020MS, N-8500MS, N-8510MS |
| Description:
- Streamline design: The main unit has aluminum alloy shell, and the extension has built-in speaker.This system has simple connection for DIY operation.
- Highg quality: This system has top-quality speaker and high-sensitive microphone. Especiall the metal tube microphone is deal for the counter and the dual-way inter-communication.
- Good performance: The voice from this system is clear,and natural. There is a switch ony for the volume control.
- Advance technique: For this system,we adopter the advanced microcomputer from U.S.A
- Definite instruction: The indicating lamp shows the track\'s working status.
- Simple operation I: Easy for dual-way intercommunication without pressing button.
- Simple operation II: This system haw two knobs to adjust the inside and outside volume. When the indicating lamp for audio turns green,the intercommnication could begin.
- Simple operation III: You could record the voice through record jack.
- Best Choice: It suitable for the Bank, Securities Company , Hospital, Station where the security glazing is installed.
Feature:
- Dual-way intercommunication
- Slim fit design of speaker
- Anti-interruption and noise
- Dual-way audio record
Performance Data:
- Brand: RL
- Working voltage: DC9V/0.5A
- Input voltage: AC 110-240V
- Cale length: 160cm
- Main sound (sub sound): 2W, 100Hz-15KHz
- Inside microphone: -48db 20Hz-20KHz
- Outside microphone: -48db 20Hz-16KHz
- Main box size: 158x87x46(335)mm
- Deputy box: 91x77x23mm
Package Includes:
- 1 x Dual-way counter interphone
- 1 x External speaker
- 1 x Charger
- 1 x English User Manual
|
The N-8000RS is a Sub-station interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. Up to 16 sub-stations can be connected using 2-core shielded cables. The number of LAN-connected N-8000 system components such as the N-8000RS and IP intercom exchanges is 192 maximum in total. Connecting the unit to the LAN permits the sub-station to receive paging calls and make calls to both the master station connected to the IP intercom exchange and the IP master station. It can be mounted in an EIA equipment rack (1U size) with the use of an accessory rack mounting bracket or installed on a wall using an optional wall mounting bracket.
| Power Source | 220 - 240 V AC, 50/60 Hz | | Power Consumption | 40 W (at rated), 50 W (max.) | | Interface Section for Sub-station | Number of lines: 16 lines
Number of speech link: 2 links
Transmission system: Analog baseband
Transmission range: 500 m (546.81 yd)/φ0.5 mm (AWG24), 800 m (874.89 yd)/
Speech method: Half-duplex conversation by way of voice switch,
Connector: Removable terminal block (3 pins)
Wiring method: Two-core shielded cable
Audio output: Conversation: Max. 1 W, Paging: Max. 0.5 W/line
Feeding voltage/current: 22 V DC, 30 mA max.
Control signal: Call in button detection, privacy button detection, hook detection | | Network Section | Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (Speech: 2 links, Paging: Max. 8 zones)
Connector: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16-bit
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software) | | Indication | Network LNK/ACT indication, Status lamp, Power-on indication lamp | | Other | Firmware update function, System data hold function, Reset switch (front panel) | | Setting Method | Rack, Desk, Surface mount | | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | | Operating Humidity | 90 %RH or less (no condensation) | | Finish | Pre-coated steel plate, black, 30 % gloss | | Dimensions | 420 (W) × 44.3 (H) × 325.5 (D) mm (16.54" × 1.74" × 12.81“) | | Weight | 3.9 kg (8.6 lb) | | Accessory | Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Removable terminal plug (3 pins)…16, Plastic foot…4, Screw for fitting plastic foot…4,
Rack mounting bracket…2, Screw for mounting bracket…8, Screw for rack mounting…4 | | Option | Wall mounting bracket: YC-850 |
|
Reviews
There are no reviews yet.